QQ: 859818709

RayTools BW08L Handheld Wide-Band Laser Welding Head, 8 kW, 34 mm, formerly BW290-8W

RayTools BW08L Handheld Wide-Band Laser Welding Head, 8 kW, 34 mm, formerly BW290-8W

Price on request

Description

Product Overview

The BW08L is a handheld wide-band laser welding head from RayTools and the successor to the former BW290-8W. It is rated up to 8000 W, and its wide-band optics accept the main high-power welding sources on the market, so the same head can be carried across machines. The clear aperture is 34 mm, and a Ø37×5 mm dual protective window guards the lens group. At about 4 kg the head stays light for its power class, and water cooling keeps the optics stable through deep-penetration and thick-plate work.

Key Features

  • Rated to 8000 W: high-power handheld welding
  • Wide-band optics: broad compatibility across high-power laser sources
  • Dual protective window: Ø37×5 mm ahead of the lens group
  • About 4 kg: light for its power class
  • Water-cooled: stable through continuous thick-plate work

Technical Specifications

Brand Empower / RayTools
Model BW08L (formerly BW290-8W)
Type Handheld laser welding head
Power up to 8000 W
Wavelength wide band
Clear Aperture 34 mm
Protective Lens Ø37×5 mm, dual protective window
Weight approx. 4 kg

Applications

High-power handheld laser welding, welding of medium and heavy plate, and deep-penetration welding of structural parts. The head is aimed at work where an 8 kW source is already on the floor and the bottleneck is the head rather than the laser: thick sections that have to be closed in one pass, and long seams where the optics must stay stable for hours. Tell us the plate thickness, the joint preparation and the source model and we will confirm the head and the cooling requirement.

Selection Guide

  • The BW08L is the top of the RayTools handheld range below the 12-30 kW BW12K series. Choose it when the source is 8 kW and the joint is a deep-penetration or heavy-plate weld.
  • Against the BW06K the difference is the power ceiling and the thermal margin, not the optical format: both use a 34 mm clear aperture and a Ø37×5 mm dual window, so nozzles, windows and fixtures stay common if you run both.
  • Water cooling is mandatory here. Confirm the chiller capacity and the circuit for the head before ordering, because the lens group sees the full 8000 W.
  • Coaxial CCD and temperature monitoring are optional and should be specified against the line requirement; at this power the protective-window inspection interval should be set from shift output rather than by calendar.
  • Every unit ships from original factory stock with a packing list and warranty certificate; warranty and spare-part support run from the delivery date, wear items such as lenses and seals excluded.
  • Key specifications are in the table above. For focusing options or a higher power ceiling, contact us for a comparison across the series and a quotation.

Usage Precautions

  • Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
  • Use purified or deionised water in the cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
  • Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
  • Set the cooling flow of the head as stated in the manual: water that is too cold causes condensation on the optics and water that is too hot forces the source to derate; if the inlet-to-outlet temperature difference is abnormal, check the water circuit first.
  • On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

Which model replaces the former BW290-8W?
The BW08L, after RayTools moved to the new naming scheme.

How thick a plate can it weld?
That depends on the laser power and the process parameters. In the 8 kW class a single pass typically reaches from a few millimetres up to the low teens of millimetres, and a trial weld on your own material is the reliable way to confirm it.

How does it differ from the BW06K?
A higher power ceiling and a heavier cooling configuration, which together give more process margin on thick sections. The aperture and the protective window are the same.

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.

Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools BW08L Handheld Wide-Band Laser Welding Head, 8 kW, 34 mm, formerly BW290-8W”

Your email address will not be published. Required fields are marked *

中文EN