QQ: 859818709

RayTools BW06K Handheld Laser Welding Head, 6 kW, 1064 + 450 nm, 34 mm, formerly BW240

RayTools BW06K Handheld Laser Welding Head, 6 kW, 1064 + 450 nm, 34 mm, formerly BW240

Price on request

Description

Product Overview

The BW06K is a handheld laser welding head from RayTools and the replacement for the former BW240. It is rated for welding systems up to 6000 W and combines a 1064 nm main band with 450 nm blue light, which stabilises the weld on medium and highly reflective metals. The clear aperture is 34 mm, and the optics are protected by a dual window of Ø37×5 mm, so contamination is stopped one stage earlier and the inner lens stays clean for longer. A Ø6 mm water-cooling circuit carries heat away from the lens group, and the complete head weighs about 3 kg.

Key Features

  • Rated to 6000 W: mid-power handheld welding
  • 1064 nm plus 450 nm composite: friendly to reflective metals
  • Dual protective window: Ø37×5 mm, two-stage protection
  • Light at about 3 kg: less fatigue over a long shift
  • Ø6 mm water cooling: effective heat removal from the lens group

Technical Specifications

Brand Empower / RayTools
Model BW06K (formerly BW240)
Type Handheld laser welding head
Power up to 6000 W
Wavelength 1064 nm + 450 nm composite
Clear Aperture 34 mm
Protective Lens Ø37×5 mm, dual protective window
Water Cooling Ø6 mm circuit
Weight approx. 3 kg

Applications

Mid-power handheld laser welding, welding of aluminium and copper, and welding of metal structural parts. The 34 mm aperture and the dual window are aimed at exactly this band of work: joints that need more penetration than a 3 kW head delivers, on parts that are too large to put in a chamber, with enough fume and spatter in the air that lens changes come around quickly. Send us the material, the joint and the required penetration and we will confirm whether 6 kW is enough or whether the 8 kW BW08L is the better fit.

Selection Guide

  • Fix the power ceiling first. The BW06K sits between the 3 kW BW03K and the 8 kW BW08L; choose it when the thickest joint needs more penetration than 3 kW delivers but the work does not justify an 8 kW source.
  • The practical difference against the BW03K is the 34 mm aperture and the Ø37×5 mm dual window: the larger aperture tolerates a wider beam and more alignment error, and the second window adds a barrier ahead of the inner lens.
  • Water cooling is required at this power. Plan a Ø6 mm circuit from the chiller to the head; if the machine has no spare chiller branch, the BW03K runs without one.
  • Coaxial CCD and temperature monitoring are optional and should be specified against the line requirement; set the protective-window change interval from shift output and keep an inspection log.
  • Every unit ships from original factory stock with a packing list and warranty certificate; warranty and spare-part support run from the delivery date, wear items such as lenses and seals excluded.
  • Key specifications are in the table above. For a different interface or focusing, contact us for a comparison across the series and a quotation.

Usage Precautions

  • Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
  • Use purified or deionised water in the cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
  • Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
  • Set the cooling flow of the head as stated in the manual: water that is too cold causes condensation on the optics and water that is too hot forces the source to derate; if the inlet-to-outlet temperature difference is abnormal, check the water circuit first.
  • On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

Which model replaces the former BW240?
The BW06K, after RayTools moved to the new naming scheme.

How does it compare with the 4 kW option?
Choose 6 kW when the weld has to be deeper and wider and the cycle time is short; for thin sheet where weight and cost matter, the lower-power head is enough.

What is the benefit of a dual protective window?
The outer window takes the spatter and the fume, so contamination is isolated more thoroughly, the inner lens lasts longer and the replacement cost stays low.

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.

Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools BW06K Handheld Laser Welding Head, 6 kW, 1064 + 450 nm, 34 mm, formerly BW240”

Your email address will not be published. Required fields are marked *

中文EN