QQ: 859818709

RayTools BW12K/BW20K/BW30K Handheld Laser Welding Head, 12-30 kW, 48 mm, formerly BW450

RayTools BW12K/BW20K/BW30K Handheld Laser Welding Head, 12-30 kW, 48 mm, formerly BW450

Price on request

Description

Product Overview

The BW12K, BW20K and BW30K form the ultra-high-power handheld laser welding head range from RayTools, replacing the former BW450 series. The range covers 12 to 30 kW and uses direct water cooling of the copper optics so that thermal management stays reliable at these power levels. The clear aperture is 48 mm, an air knife keeps dust and spatter off the optics, and three Ø50×2 mm protective windows shield the lens group in stages. Focusing is selectable from 250 to 400 mm, the body weighs about 5 kg, and the head serves both heavy-structure handheld welding and automated welding systems.

Key Features

  • 12-30 kW: the full ultra-high-power range in one optical format
  • Direct water cooling of copper optics: reliable thermal management at the top of the range
  • 48 mm clear aperture: ample aperture for high-power beams
  • Air knife plus three protective windows: layered protection for the lens group
  • Selectable focusing: 250-400 mm

Technical Specifications

Brand Empower / RayTools
Model BW12K / BW20K / BW30K (formerly BW450 series)
Type Ultra-high-power handheld laser welding head
Power 12 kW / 20 kW / 30 kW
Clear Aperture 48 mm
Protective Lens three pcs, Ø50×2 mm
Cooling direct water cooling of copper optics
Focusing 250-400 mm
Weight approx. 5 kg

Applications

Heavy-structure welding, deep-penetration welding of thick plate, and high-power automated welding lines. This is the head for sections that a 6 or 8 kW machine cannot close in one pass, and for production lines where the same head is carried on a gantry or a robot instead of by hand. Because the three models share one optical format, a line that moves from 12 kW to 20 kW does not have to change nozzles, windows or fixtures. Send us the plate thickness, the joint and the source model and we will confirm which power class fits.

Selection Guide

  • Choose by source power: BW12K for 12 kW, BW20K for 20 kW, BW30K for 30 kW. The three share one optical format, so tooling, nozzles and protective windows are common across the range.
  • At this level the head is usually carried by a welding machine or an automated platform rather than used freehand; where it is used by hand, fixtures and a strict safety envelope are part of the selection, not an afterthought.
  • Size the cooling circuit for the full power before ordering. Direct water cooling of the copper optics is what keeps 30 kW workable, so chiller capacity is a hard constraint rather than a preference.
  • Coaxial CCD and temperature monitoring are optional and should be specified against the line requirement; with three windows in the stack, keep a per-window inspection record so a damaged stage is replaced on its own.
  • Every unit ships from original factory stock with a packing list and warranty certificate; warranty and spare-part support run from the delivery date, wear items such as lenses and seals excluded.
  • Key specifications are in the table above. For a different focusing range or an interface matched to your machine, contact us for a comparison across the series and a quotation.

Usage Precautions

  • Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
  • Use purified or deionised water in the cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
  • Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
  • Set the cooling flow of the head as stated in the manual: at these powers a flow shortfall shows up first as distortion of the copper optics, so treat any flow or temperature alarm as a stop condition rather than a warning.
  • On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

Which model replaces the former BW450?
The BW12K, BW20K and BW30K take over from the BW450 series; select by laser power.

Is 30 kW handheld practical?
In practice the highest powers are paired with a dedicated welding machine or an automated platform. Freehand work at that level needs strict safety discipline and fixture support.

What does the air knife do?
It blows across the optics ahead of the lens group to keep dust and spatter off, which extends the life of the protective windows.

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.

Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools BW12K/BW20K/BW30K Handheld Laser Welding Head, 12-30 kW, 48 mm, formerly BW450”

Your email address will not be published. Required fields are marked *

中文EN