QQ: 859818709

RayTools BS04K All-in-One Smart Laser Cutting Head, 1-4 kW, IP65, International Edition

RayTools BS04K All-in-One Smart Laser Cutting Head, 1-4 kW, IP65, International Edition

Price on request
Category:

Description

Product Overview

The BS04K is the all-in-one smart laser cutting head in the RayTools range, supplied here in the international edition and rated for laser sources from 1 kW to 4 kW. All-in-one describes the architecture rather than the power class: the collimating and the focusing optic groups are carried in one housing instead of two modules bolted together, so the beam path crosses fewer mechanical interfaces and the head arrives as a single assembly to mount, connect and protect. The structure is modular where it matters in service – the wear parts and their carriers are separate from the optical train, so a lens change does not disturb the focus group.

Two things decide how such a head behaves in daily production. The first is focus: the BS04K sets focus automatically, which shortens piercing and lets the machine pick up the next sheet without an operator re-datuming the nozzle by hand. The second is thermal load: both the focusing lens and the collimating lens sit on built-in cooling, so the heat that a 4 kW beam deposits in the optics is carried away at the holder rather than left to drift the focal position over a long nest. Around those sit the protective measures – an IP65 dust-rated enclosure, several protective lenses standing in series in front of the focus optic, and a body sealed tightly enough that the optical cavity stays clean between services.

This page documents what the manufacturer publishes for the BS04K: the 1-4 kW power range, the all-in-one architecture, the automatic focus, the IP65 dust rating, the cooled focusing and collimating lenses, the multi-stage optical protection, the sealing, and the international-edition conformity with interfaces adapted to overseas laser brands. Clear aperture, focal lengths, focus travel and weight are configuration-dependent and are not published as fixed figures for this head; they are confirmed against the laser source and the cutting process you intend to run.

Key Features

  • One housing for collimation and focusing: the two optic groups share a body, so there is no collimation-to-focusing joint to re-align after transport or a lens change, and the envelope stays short enough to fit a standard machine’s Z axis
  • Automatic focus: the focal position is set by the head rather than by hand, which shortens piercing and lets the machine take the next sheet without an operator re-datum
  • IP65 dust protection: the optical cavity is sealed to IP65, so the fine dust and metal condensate of a cutting shop cannot settle on the protective lens and start a burn
  • Cooled focusing and collimating lenses: both holders carry cooling, which removes the heat load that would otherwise shift focus and beam quality as the head warms through a shift
  • Multi-stage optical protection: more than one protective lens sits between the workpiece and the focus lens, so a spatter strike stops at the consumable instead of reaching the coated optic behind it
  • Sealed modular body: wear parts are separate from the optical train, so a lens change is a short interruption rather than a partial rebuild
  • International edition: CE conformity plus interfaces and communication matched to overseas laser brands, which is the difference that matters when the head is not going onto a RayTools-built machine

Technical Specifications

Brand Empower / RayTools
Model BS04K, International Edition
Type All-in-one smart laser cutting head (integrated collimation and focusing)
Laser Power Range 1-4 kW
Optical Configuration Collimating unit and focusing unit integrated in one housing
Focus Adjustment Automatic
Enclosure Protection IP65 dust protection
Lens Cooling Built-in cooling on the focusing lens and on the collimating lens
Optical Protection Multi-stage protective lens stack in front of the focus optic
Sealing High-integrity sealed body, optical cavity protected between services
Conformity CE, international edition
Interfaces / Communication Adapted to overseas laser brands (international edition)
Clear Aperture, Focal Lengths, Focus Travel, Weight Configuration-dependent, not published as fixed figures for this head – confirmed per laser source and process

Applications

The BS04K is aimed at flat-sheet cutting on standard cutting machines, which is where an all-in-one head pays for itself: the mounting is simple, the envelope is compact and the focus is set by the head rather than by the operator. In practice that means production cutting where the machine runs the same nest structure all day and the operator’s job is to load, unload and keep the protective lens clean.

The same interface also suits general laser processing of metal parts where a compact sealed head is preferred to a split assembly – for example where the machine builder wants to keep the Z axis short, or where one head has to move between machines. If the work moves to tube, the BD08K and the GF402 in the same range take over with tube-specific optics and, in the GF402, four-axis linkage. Tell us the laser source, the material and the thickness range and we will confirm whether the 1-4 kW envelope covers the job.

Selection Guide

  • Buy the architecture for the machine, not for the catalogue: on a standard cutting machine the all-in-one body is the simpler installation; where the machine is custom-built or the Z axis is constrained, a split head gives more freedom in routing and service access.
  • Match the power tier to the thickest routine cut: the BS04K covers 1 kW to 4 kW. If the shop regularly runs above that, a different head in the range is required – do not buy a 4 kW head hoping to run it at 6 kW.
  • Choose the edition by the machine it lands on: the international edition is the one to specify for CE markets and for overseas laser brands, because the interfaces and the communication protocol are matched to them rather than to domestic sources.
  • Treat IP65 as a maintenance interval, not a guarantee: a sealed cavity slows contamination but does not end it. Keep spare protective lenses in stock and inspect on a fixed schedule, because a contaminated lens costs power and cut quality long before it fails visibly.
  • Ask for the configuration data before you commit: aperture, focal lengths, focus travel and weight are fixed per configuration, and those are the numbers that decide whether the head fits your machine and your process window.

Series Comparison

Model BS04K (this page) | BD08K | GF402
Head Class All-in-one cutting head | Auto-focus tube cutting head | 4-axis tube cutting head
Laser Power Range 1-4 kW | 1-8 kW | Multiple power segments, fixed per laser source
Optic Architecture Collimation and focusing in one housing | Collimation plus focusing, tube-oriented | Collimation plus focusing, four-axis
Focus Adjustment Automatic | Automatic | Automatic
Workpiece Flat sheet on standard cutting machines | Round, square, rectangular and special-shaped tube | Tube with intersecting-line, multi-hole and angled seams
Follow-Up Unit Not part of this configuration | Not part of this configuration | Built-in follow-up unit
Protective Lens Multi-stage stack | Multi-stage stack | Drawer-type carrier
Dust Protection IP65 rated enclosure | IP65 rated enclosure | High dust protection by drawer-type design
Edition International edition with CE conformity | Not stated in the source data | Not stated in the source data

Usage Precautions

  • Never look into the beam or into specular reflections while the laser is running. Mark the working area with warning signs, fit protective screens and have everyone wear goggles rated for the wavelength in use.
  • Use purified or deionised water in the cooling circuit and change it on schedule. If temperature or flow alarms, stop the machine, find the cause and only then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
  • Protect the head from moisture and dust in transport and storage; before a long shutdown drain the water circuit, disconnect power and cover the unit.
  • Inspect the protective lens at every shift change. Spatter, dust and finger marks all absorb power; a marked lens is replaced, not cleaned and put back.
  • Do not re-datum the focus by hand on an automatic head. Set the focus offset in the programme and prove it on a scrap coupon, because a wrong offset shows up as a wide kerf or dross rather than as an alarm.
  • Check the nozzle and the gas path with the head in its working attitude; a distorted nozzle or a partly blocked gas path changes the plume, and the damage appears on the part rather than at the machine.
  • On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

What is the difference between the international edition and the domestic edition?
The international edition is optimised for overseas market requirements and conforms to international standards such as CE; its interfaces and communication protocol are adapted to overseas laser brands. The domestic edition is matched to domestic sources.

All-in-one or split head – how do I choose?
An all-in-one head is compact and simple to install, which suits standardised cutting machines. A split head is more flexible and is the better choice for customised machines or where space is constrained.

Which laser sources can the BS04K run on?
The published power range is 1 kW to 4 kW. Anything above that belongs to a different head in the range; sending us the source model and the thickness range is the quickest way to confirm the match.

Does the head need a chiller connection?
Yes. Both the focusing lens and the collimating lens are on built-in cooling, so the head has to be connected to the machine’s cooling circuit. That is the point of the design – it removes the heat that would otherwise drift the focus during a long run.

How does this head differ from the BS04K CAT-2D, the CAT-3D and the BS08K?
This page covers the BS04K in its all-in-one form at 1-4 kW. The CAT-2D and CAT-3D are different configurations of the same 4 kW class, and the BS08K is the 8 kW all-in-one head. If your enquiry is about one of those, tell us the model on the nameplate so the right page and the right optics are quoted.

Where can I find the aperture, focal lengths and weight?
Those figures are configuration-dependent for this head and are not published as fixed values, so they are confirmed per order. Send the laser source, the material and the thickness range and we will return the matching optical set with its dimensions.

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.

Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

For configuration-specific data, contact our engineering team with your laser source and workpiece details.

Reviews

There are no reviews yet.

Be the first to review “RayTools BS04K All-in-One Smart Laser Cutting Head, 1-4 kW, IP65, International Edition”

Your email address will not be published. Required fields are marked *

中文EN