Description
Product Overview
The BD08K is the automatic-focus tube cutting head in the RayTools range, rated for laser sources from 1 kW to 8 kW. Its purpose is narrow and specific: to keep the focal position correct on a workpiece whose surface curves away from the nozzle, whose section is rarely a perfect circle, and whose straightness changes along the length of the bar. On flat sheet the standoff is constant and focus can be set once; on tube neither assumption holds, so the head has to adjust focus as the contour changes, and the optics behind that adjustment have to be tuned for tube geometry rather than for plate.
That is what the BD08K does. Automatic focus re-datums the focal position as the head travels around the section, which compensates the focus shift caused by tube bend and by surface unevenness and keeps the cut face consistent from the top of the wall to the bottom. The optical parameters are optimised for tube cutting conditions, so the beam is not simply a plate-cutting set-up pressed into a different job. Around the optics sit the same protective measures used across the range: an IP65 dust-rated enclosure against the dust and coolant mist of a tube shop, built-in cooling on both the focusing and the collimating lens, a multi-stage protective lens stack in front of the focus optic, and a body sealed tightly enough to keep the optical cavity clean between services.
This page documents what the manufacturer publishes for the BD08K: the 1-8 kW power range, the automatic focus, the tube-oriented optics, the IP65 dust rating, the cooled lens holders, the multi-stage optical protection, the sealing, and the tube types covered. Tube diameter range and wall thickness are not fixed figures – they depend on the power of the laser source behind the head. Clear aperture, focal lengths, focus travel and weight are likewise confirmed per configuration.
Key Features
- Automatic focus that follows the tube: the focal position is corrected as the contour changes, which compensates the focus shift from tube bend and surface unevenness and holds the cut face consistent around the section
- Optics set for tube, not for plate: the optical parameters are optimised for tube cutting conditions, where the wall curves away from the nozzle and the incidence angle changes continuously
- One model across 1-8 kW: a single head designation spans thin-wall work and heavy-wall work, so a shop that buys a second, more powerful source does not have to re-learn a different head
- IP65 dust protection: the optical cavity is sealed to IP65, which matters more in tube cutting than in sheet cutting because the process throws fine dust and coolant mist straight at the nozzle
- Cooled on both lenses: the focusing and the collimating lens each sit on built-in cooling, removing the thermal load that would otherwise move focus as the head warms
- Multi-stage protective lens stack: several protective lenses stand between the workpiece and the focus optic, so a spatter strike is absorbed at the consumable
- High-integrity sealing with modular wear parts: the body is sealed tightly and the wear parts are separate from the optical train, which keeps stoppages short
- Broad tube geometry coverage: round, square, rectangular and special-shaped tube, with diameter and wall thickness set by the laser power behind the head
Technical Specifications
| Brand | Empower / RayTools |
| Model | BD08K |
| Type | Automatic-focus tube cutting head |
| Laser Power Range | 1-8 kW |
| Focus Adjustment | Automatic, fast and precise focal position adjustment for tube cutting |
| Optics | Optical parameters optimised for tube cutting conditions |
| Tube Types | Round tube, square tube, rectangular tube, special-shaped tube |
| Tube Diameter and Wall Thickness | Dependent on the power of the matched laser source |
| Enclosure Protection | IP65 dust protection |
| Lens Cooling | Built-in cooling on the focusing lens and on the collimating lens |
| Optical Protection | Multi-stage protective lens stack in front of the focus optic |
| Sealing | High-integrity sealed body, modular wear parts |
| Clear Aperture, Focal Lengths, Focus Travel, Weight | Configuration-dependent, not published as fixed figures for this head – confirmed per laser source and process |
Applications
The BD08K is the head to specify when the workpiece is tube rather than sheet: cutting to length, holes and slots in the side wall, mitres and square cuts on round, square, rectangular and special-shaped section. The value of the automatic focus shows up wherever the tube is not straight – long bars with a bend, cold-drawn section with a weld seam standing proud, or stock that has been stored badly – because the head corrects the focal position instead of leaving the operator to compensate by hand.
Power sets the wall thickness the head can work in, so the 1-8 kW span covers the range from light-gauge section to heavy-wall structural tube, and the same head serves both ends of it. Where the seam is an intersecting line, a multi-hole pattern or an angled cut that needs the tube to rotate while the head moves, the four-axis GF402 is the correct head instead; where the section is thick and the cut is square to the axis, the BD08K is the simpler and cheaper answer. Send us the tube sizes, the wall thickness and the seam types and we will confirm the head and the source together.
Selection Guide
- Choose this head when the work is tube: the automatic focus and the tube-oriented optics are what you are paying for. If the machine mostly cuts sheet, an all-in-one plate head such as the BS04K is the better fit.
- Set the power tier by wall thickness, not by tube size: the head spans 1-8 kW, and the wall thickness it can cut follows the source behind it. Tube diameter alone says nothing about the power needed.
- Pay for automatic focus where the stock is imperfect: on clean, straight, cold-drawn tube a manual head can survive; on bent bars and uneven section the automatic correction is the difference between a consistent cut face and one that varies around the circumference.
- Plan the consumables with the order: keep protective lenses in stock. In tube cutting the lens sees spatter and mist continuously, and a marked lens shows up as lost power and dross before it fails.
- Move to the GF402 when the seam geometry demands it: intersecting-line cuts, multi-hole patterns and angled seams need the tube to rotate while the head moves, which is four-axis work rather than the tube-cutting duty of this head.
Series Comparison
| Model | BD08K (this page) | BS04K | GF402 |
| Head Class | Auto-focus tube cutting head | All-in-one cutting head | 4-axis tube cutting head |
| Laser Power Range | 1-8 kW | 1-4 kW | Multiple power segments, fixed per laser source |
| Workpiece | Round, square, rectangular and special-shaped tube | Flat sheet on standard cutting machines | Tube with intersecting-line, multi-hole and angled seams |
| Focus Adjustment | Automatic | Automatic | Automatic |
| Optics Tuned For | Tube cutting conditions | Flat-sheet cutting | Four-axis tube cutting |
| Tube Coverage | Diameter and wall thickness set by the laser power | Not applicable | Complex seams requiring tube rotation with head motion |
| Follow-Up Unit | Not part of this configuration | Not part of this configuration | Built-in follow-up unit |
| Protective Lens | Multi-stage stack | Multi-stage stack | Drawer-type carrier |
| Dust Protection | IP65 rated enclosure | IP65 rated enclosure | High dust protection by drawer-type design |
Usage Precautions
- Never look into the beam or into specular reflections while the laser is running. Mark the working area with warning signs, fit protective screens and have everyone wear goggles rated for the wavelength in use.
- Use purified or deionised water in the cooling circuit and change it on schedule. If temperature or flow alarms, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the head from moisture and dust in transport and storage; before a long shutdown drain the water circuit, disconnect power and cover the unit.
- Inspect the protective lens at every shift change, and more often when cutting tube with a heavy oxide layer. A marked lens is replaced, not cleaned and reused.
- Verify the focus correction on a scrap length of the same tube before running a batch. Automatic focus compensates bend and surface unevenness, but it cannot correct a chuck that is not gripping the bar concentrically.
- Check the chuck clamping pressure and the support steady for each tube size. Tube that moves in the chuck produces a cut that varies around the circumference, which is easy to mistake for an optics problem.
- On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
Which tube types does the BD08K support?
Round tube, square tube, rectangular tube and special-shaped tube. The diameter range and the wall thickness depend on the power of the matched laser source.
How does automatic focus improve cut quality?
It compensates in real time for the focus shift caused by tube bend and by surface unevenness, which is what keeps the cut face and the consistency of the section from varying around the circumference.
What is the difference between the BD08K and the GF402?
The BD08K is the automatic-focus tube cutting head: focus correction on tube, with tube-oriented optics, for cuts where the seam runs square to the axis. The GF402 adds four-axis linkage – tube rotation combined with head motion – for intersecting-line cuts, multi-hole patterns and angled seams.
How does this differ from the BD08K 90-degree 3D tube head or the robot version with motorised slide?
This page covers the standard automatic-focus tube cutting head. The 90-degree 3D variant provides right-angle beam output for 3D tube work, and the robot version adds a motorised slide and an external Z axis for robot-mounted cutting. Neither of those is part of this configuration.
Can the head run at 8 kW continuously?
The published power range is 1 kW to 8 kW. Continuous capability depends on the source, the duty cycle and the cooling circuit, so confirm the combination with us rather than assuming the top of the range.
What data do you need to quote a BD08K?
The laser source model and power, the tube types and sizes, the wall thickness range and the seam types you need to cut. With those we can confirm the head configuration and the optics.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.
For configuration-specific data, contact our engineering team with your laser source and workpiece details.








Reviews
There are no reviews yet.