Description
Product Overview
The PTZJ F3.2 is a CNC system for flange circumferential welding, and it exists to solve one problem: on a flange, the weld is a closed circular seam, so a parameter that drifts halfway round does not produce a slightly worse weld, it produces a part that fails a leak test at one point. The F3.2 is the control core of an automated flange welding machine. The rotary axis that carries the flange, the laser that welds it and the travel of the seam are driven from one parameter set rather than as three numbers that happen to be set at the same time, so a change to the rotation speed is reflected in the power and the welding speed instead of leaving them behind.
The second function is the process parameter library. A flange specification is a repeatable item: the same diameter, the same wall thickness, the same joint preparation. The F3.2 stores the welding parameters for a specification as a group, so a changeover is a recall rather than a retune, and two shifts running the same flange run the same numbers. Multi-specification grouping keeps those sets apart, which matters more than it sounds: a library that is one long list is a library where the wrong set gets applied to the wrong flange, and the weld that results looks correct until it is cut open.
Access is graded. Setup parameters, the process library and the run screen sit behind different operator levels, so production staff work within an authorised range while the people who develop the process keep control of the numbers underneath it. That combination – a stored library plus a boundary around it – addresses the failure that actually costs money in batch ring welding, which is a parameter edited during a trial and left in the controller afterwards.
It is a control system, not a machine. The welding head, the laser source and the mechanical axes belong to the flange welding machine it is fitted to, and the F3.2 is the layer that sequences them. The table below lists what the control provides; the process window is developed on samples of the actual flange.
Key Features
- Coupled parameters: rotary axis speed, laser power and welding speed are held in one set, so the seam is welded under one set of conditions from the start of the circle to the overlap
- Process parameter library: welding parameters are stored per flange specification and recalled at changeover, which is what keeps a batch consistent across shifts
- Multi-specification grouping: parameter sets for different flange sizes are kept as separate groups, so a stored set cannot be applied to the wrong workpiece by scrolling too far
- Graded access: setup, library editing and production running are separated by operator level, so the run screen cannot be used to change a process parameter
- Production-oriented interface: the run screen is built around changeover by recall and start, not around a parameter tree, because the person at the machine is a welder rather than a programmer
- Automation core: designed as the control layer of a purpose-built flange welding machine, coordinating the rotary axis with the laser rather than operating as a stand-alone controller
Technical Specifications
| Model | PTZJ F3.2 |
| Product type | Flange circumferential welding CNC system |
| Function | Coupled parameter control and process parameter library |
| Coupled parameters | Rotary axis speed, laser power, welding speed |
| Process library | Parameter groups stored by flange specification, recalled at changeover |
| Parameter management | Multi-specification grouping, entry and recall of custom process parameters |
| Access control | Operator levels, with setup and production running separated |
| Coordinated channels | Rotary axis, laser power, welding speed |
| Compatible equipment | Purpose-built flange circumferential welding machine |
| Related model | FQ1.0, the flange welding machine body that this control is fitted to |
Applications
The control is used wherever a flange is welded by rotating it under a fixed head, which is the standard arrangement for circular seams on pipe flanges, vessel nozzles and fittings.
- Flange circumferential welding machines, where the part turns and the head stays still, so the seam is closed by rotation rather than by moving an arm around it
- Automated ring welding lines, where several flange sizes run on the same station and changeover time decides the output of the line
- Rotary body welding of parts whose seam is a circle of constant diameter, including nozzles, adaptors and thick-wall fittings
- Batch production where the same flange is welded repeatedly, and where the value of the control is that shift two welds the same as shift one
- Retrofits of an existing flange machine where the mechanics are sound and the control layer is what is being replaced
Selection Guide
- Start from the machine, not from the controller: list the axes the flange machine actually has and which of them the control has to sequence. That answer fixes the program structure before any process parameter is discussed
- Decide who owns the parameter library: if process development sits with an engineer and production sits with an operator, the access levels are a specification item rather than an afterthought
- Plan the changeover before commissioning: group the flange specifications the way the shop actually schedules them, because a library organised by drawing number and a shop that schedules by diameter will not match
- Confirm the electrical interface of the machine: the servo architecture and the laser interface of the existing machine decide which version of the control fits, and confirming them first avoids an adapter that nobody costed
- Keep one parameter file per flange type and back it up: the library is setup data, not part of the control firmware, and rebuilding it from notes is how two identical machines end up welding differently
Usage Precautions
- Back up the library before any change: export the parameter set before a firmware update or a reorganisation of the groups, and keep the file with the machine record
- Cabinet environment: the control is an electrical unit and expects a cabinet that stays within its rated ambient range. Dust and metal fume from welding are the usual cause of intermittent faults, so the cabinet needs filtered ventilation rather than an open door
- Earthing: the control, the machine frame and the laser supply must share a single low-impedance earth. A floating earth shows up as parameter corruption and as position errors that cannot be reproduced
- Access levels at handover: set the operator and setup passwords before the machine goes into production, and record who holds which level. A machine handed over with one shared password loses the protection the levels were bought for
- Laser safety remains with the machine: the control sequences the laser, it does not enclose it. Interlocks, guarding and the warning signage belong to the machine and must be verified independently of the control software
FAQ
How does the F3.2 relate to the FQ1.0? The FQ1.0 is the flange welding machine body; the F3.2 is the CNC system supplied with it. Together they form a complete flange circumferential welding solution, and the F3.2 can also be specified as the control layer of a machine built by another supplier.
Can the parameter library be customised? Yes. Process parameters are entered per workpiece specification and recalled from the library, so the groups reflect the flange sizes and materials that are actually run rather than a fixed list.
Can the control be extended beyond the rotary axis? Yes, the configuration can be extended with auxiliary coordinated axes. The extension is defined at quotation because it changes the I/O assignment and the program structure, and retrofitting it later is a change to both.
Does the control set the welding parameters itself? No. It stores, couples and recalls parameters that are developed on samples of the joint. The process window still has to be established on the actual flange, and the control is what makes that window repeatable afterwards.
Disclaimer
Specifications on this page are compiled from the manufacturer’s published material and from existing documentation, and are provided as a selection reference. The delivered configuration is defined by the physical unit, the factory test report and the current manufacturer specification; the welding head, laser source and mechanical axes are part of the machine the control is fitted to. Firmware behaviour and available parameters may change between versions, so confirm the details with us before ordering. Reproduction of this page without written permission is not permitted.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159 2722 0467, www.soar-laser.cn, email 859818709@qq.com.








Reviews
There are no reviews yet.