QQ: 859818709

Thorlabs PF10-03-F01-10 Ø25.4 mm UV-Enhanced Aluminum Mirror, 10-Piece Pack

Thorlabs PF10-03-F01-10 Ø25.4 mm UV-Enhanced Aluminum Mirror, 10-Piece Pack

Price on request
Category:

Description

This is the 10-piece pack of the PF10-03-F01; the optic is identical to the single-unit version.

Product Overview

Ten Ø25.4 mm fused silica mirrors, 6.0 mm thick, each carrying UV-enhanced aluminium with a magnesium fluoride overcoat for 250 to 450 nm at 90 percent average reflectance: λ/10 figure at 633 nm, 40-20 scratch-dig, 3 arcmin parallelism, 90 percent clear aperture, every rear face fine ground and laser engraved with the item number.

Buying ten of an ultraviolet mirror is a maintenance decision rather than an optical one. Ultraviolet coatings age: the film is attacked by the radiation itself and by the ozone that ultraviolet beams create in air, and the fluoride overcoat thins with every cleaning cycle it survives. The result is that a working ultraviolet station consumes mirrors on a schedule of months, not years. When that happens, the difference between having a spare on the shelf and ordering one is the difference between a ten minute swap and a line that stands idle waiting on a purchase order and a delivery.

The second argument is consistency. Ten optics from the same production runs have the same coating design, the same figure and the same thickness within tolerance, so a replacement drops into the mount that was aligned for its predecessor and the alignment does not have to be rebuilt. In a multi-station line that matters more than the unit price: a re-alignment costs an engineer an afternoon, and the pack costs less than that afternoon.

The third argument is administrative. One part number, one purchase order, one incoming inspection record, one line on the stores shelf, and less packaging to dispose of than ten separate shipments. For an OEM building the same ultraviolet module repeatedly, or a job shop running several ultraviolet stations, that is the whole case. Store the spares dry, flat and separated, and log which optic went into which station and when, because the engraved item number is identical on all ten and the history has to come from your records.

Key Features

  • Ten identical optics under one part number: the same coating, figure and thickness as the single unit, from the same production runs
  • 250 to 450 nm at 90 percent average reflectance: the ultraviolet band, with the magnesium fluoride overcoat that keeps the aluminium from oxidising
  • Spares on the shelf instead of on order: a contaminated or degraded optic is swapped in minutes rather than waited for
  • Repeatable replacement: matched figure and thickness mean the mount does not need re-aligning when an optic is exchanged
  • Laser engraved rear faces: the part number stays legible in a dark enclosure and on the stores shelf
  • λ/10 figure, 40-20 surface, 3 arcmin parallelism: full single-unit specification, not a downgraded bulk grade
  • Less packaging and fewer transactions: one shipment, one invoice, one inspection record for ten optics

Technical Specifications

Model PF10-03-F01-10
Pack size 10 mirrors, each identical to the PF10-03-F01
Coating UV-enhanced aluminium
Overcoat Magnesium fluoride (MgF2)
Wavelength range 250 nm – 450 nm
Average reflectance Ravg 90% from 250 to 450 nm
Substrate Fused silica
Diameter Ø25.4 mm (1 in) per optic
Diameter tolerance +0.0 mm / -0.1 mm
Thickness 6.0 mm (0.24 in)
Thickness tolerance ±0.2 mm
Surface flatness λ/10 at 633 nm
Surface quality 40-20 scratch-dig
Parallelism 3 arcmin or better
Clear aperture 90 percent of the diameter
Damage threshold, pulsed 0.25 J/cm² at 266 nm (10 ns, 10 Hz, Ø0.150 mm); 0.3 J/cm² at 355 nm (10 ns, 10 Hz, Ø0.381 mm)
Damage threshold, CW Out-of-band figures published for this coating: 300 W/cm at 1.064 µm (Ø0.044 mm); 500 W/cm at 10.6 µm (Ø0.339 mm)
Rear surface Fine ground, engraved with the item number
Source Thorlabs official series specification table

Applications

  • Ultraviolet production lines with several stations: one pack covers the fold mirrors of a multi-head line and leaves two or three on the shelf
  • OEM ultraviolet modules built in batches: kitting ten optics per build removes a per-unit purchasing step from the production plan
  • Scheduled preventive maintenance: replace ultraviolet folds on an hours-based interval rather than waiting for a visible drop in delivered power
  • Ultraviolet inspection benches: 365 nm or 405 nm illumination folds that see constant cleaning because they sit in a production environment
  • Field service kits: a technician who carries spares closes a call in one visit instead of two

Selection Guide

Situation Order this Reason
One or two folds, laboratory build PF10-03-F01, single unit No reason to hold stock for a one-off
Ultraviolet line, three or more stations PF10-03-F01-10 (this page) Spares convert a delivery lead time into a shelf pick
Visible to mid-infrared work instead of ultraviolet PF10-03-G01-10 Protected aluminium covers 450 nm to 20 µm in one part number
Smaller optic, Ø1/2 in mounts PF05-03-F01-10 Same coating and pack format in the smaller diameter
Ultraviolet beam large enough to need Ø2 in PF20-03-F01 Single unit only; the larger diameter is not offered as a pack

Series Comparison

Pack item Coating Band Average reflectance Typical pack use
PF10-03-F01-10 UV-enhanced aluminium 250 – 450 nm 90% Ultraviolet lines and OEM ultraviolet builds
PF10-03-G01-10 Protected aluminium 450 nm – 20 µm 90% from 450 nm to 2 µm; 95% from 2 to 20 µm Mixed-wavelength workshop spares
PF10-03-P01-10 Protected silver 450 nm – 20 µm 97% from 450 nm to 2 µm; 95% from 2 to 20 µm High-power visible and near infrared lines
PF10-03-M01-10 Protected gold 800 nm – 20 µm 96% Infrared lines
PF05-03-F01-10 UV-enhanced aluminium 250 – 450 nm 90% The same pack in Ø1/2 in

FAQ

Q: Is every mirror in the pack individually tested?

A: Each optic is the standard catalogue part, held to the published figure, surface and parallelism. What the pack adds is quantity, not a separate test regime. If your process needs a certificate or incoming measurement per optic, say so when ordering and it can be arranged separately.

Q: Do the spares degrade while they sit on the shelf?

A: A UV coating does not age in the dark. Store the spares dry, flat, separated and away from solvents, and they will be the same as the day they arrived. The aging happens under irradiation and under cleaning, which is exactly why keeping spares works.

Q: How do I know which optic is installed where?

A: All ten carry the same engraved item number, so the engraving identifies the type, not the individual. Keep a simple log: station, install date, accumulated hours, reason for replacement. That log is what turns a pack of ten into a maintenance record instead of a box of parts.

Q: Can I mix this pack with the protected aluminium pack on one machine?

A: Physically yes, optically no. The two coatings cover different bands, and swapping one for the other changes the delivered power at the workpiece. Keep the two part numbers in separate bins and label the stations, because once the optic is in a mount the two are hard to tell apart by eye.

Q: Is the pack cheaper than ten singles?

A: Yes, that is its purpose, along with the reduced packaging and the single transaction. The saving is on procurement and logistics rather than on the coating, since the optic inside is the same part.

Q: What happens at the end of the pack?

A: Re-order the same part number and the replacement is dimensionally and optically identical, so nothing in the fixture has to change. That continuity is the practical benefit of buying a catalogue pack rather than a custom batch.

Q: Can these be used outside 250 to 450 nm?

A: No. Below 250 nm the coating and the substrate both fall away; above 450 nm the aluminium reflectance drops quickly and the specification no longer applies. If the station also runs 532 nm or 1064 nm, use the protected aluminium or protected silver pack for those paths.

Usage Precautions

  • Do not stack the optics face to face. Ten coated surfaces in one box will find each other; keep the spares separated in their sleeves or in a partitioned tray.
  • Log the swap. Record station, date and accumulated hours when an optic is replaced, otherwise the next maintenance interval is a guess.
  • Keep the pack closed and dry between uses. Humidity does not attack the film quickly, but it does attack it, and a sealed container costs nothing.
  • Blow off, do not wipe, unless you must. The overcoat is thin and every wipe shortens the life you bought the pack to extend.
  • Match the optic to the station. A UV-enhanced mirror installed on a 532 nm path will under-deliver, and the symptom looks like a laser fault rather than a wrong part.

Disclaimer

Figures reproduced here come from public manufacturer documentation and are intended as a selection aid, not as a substitute for the released drawing. Where a value is not published we say so rather than estimate it. Commercial terms are confirmed in writing before shipment.

Contact Us

Tell us the working wavelength, the clear aperture you need and how the optic will be mounted, and we will confirm the part, the coating and the expected delivery in one reply. Requests for matched sets, coating certificates or incoming inspection data are handled by the same desk.

Reviews

There are no reviews yet.

Be the first to review “Thorlabs PF10-03-F01-10 Ø25.4 mm UV-Enhanced Aluminum Mirror, 10-Piece Pack”

Your email address will not be published. Required fields are marked *

中文EN