QQ: 859818709

Fresnel Reflection Calculator

Fresnel Reflection Calculator

Fresnel Reflection and Transmission Calculator
Enter the refractive indices of two media and the angle of incidence to calculate online the amplitude reflection coefficient r, amplitude transmission coefficient t, power reflectance R and transmittance T for s (perpendicular) and p (parallel) polarisations, together with the Brewster angle, critical angle and total internal reflection assessment. Common medium combinations such as air, glass and water, as well as custom refractive indices, are supported.
n₁sinθ₁ = n₂sinθ₂ ,  R + T = 1
Common medium combinations

Common angles of incidence

Key results
Full data table
Reflectance vs. angle of incidence curve
Reflectance vs. angle of incidence curve (zoomed near the Brewster angle)

Key equations and principles

Law of refraction (Snell’s law)
n₁ sinθ₁ = n₂ sinθ₂
Determines the refraction angle θ₂; the lower the refractive index of the transmitting medium, the larger the refraction angle.
s polarisation (perpendicular polarisation)
rₛ = (n₁cosθ₁ − n₂cosθ₂) / (n₁cosθ₁ + n₂cosθ₂)
The electric field is perpendicular to the plane of incidence, and this polarisation is denoted TE.
p polarisation (parallel polarisation)
rₚ = (n₂cosθ₁ − n₁cosθ₂) / (n₂cosθ₁ + n₁cosθ₂)
The electric field lies in the plane of incidence, and this polarisation is denoted TM. The sign convention used here gives rₚ = −rₛ at normal incidence, consistent with the s component.
Amplitude transmission coefficient
tₛ = 2n₁cosθ₁ / (n₁cosθ₁ + n₂cosθ₂)
p component: tₚ = 2n₁cosθ₁ / (n₂cosθ₁ + n₁cosθ₂). At normal incidence tₛ = tₚ = 2n₁/(n₁+n₂).
Power reflectance and transmittance
R = |r|² ,  T = (n₂cosθ₂ / n₁cosθ₁)·|t|²
The transmittance must be multiplied by the cosine ratio because the beam cross-section changes on refraction. In the absence of absorption, R + T = 1 always holds.
Normal-incidence reflectance
R = ((n₁ − n₂) / (n₁ + n₂))²
Approximately 4% for air → common glass. This is the most widely used rule of thumb: each additional ‘reflecting surface’ of glass costs another 4%.
Brewster angle
θ_B = arctan(n₂ / n₁)
At this angle rₚ = 0 and p polarisation is completely reflection-free; s polarisation still has significant reflection (about 14.8% for air → glass). Used for polarisation splitting and stray-light suppression.
Critical angle and total internal reflection
θ_c = arcsin(n₂ / n₁) (exists only when n₁ > n₂)
Total internal reflection occurs when the angle of incidence exceeds θ_c, giving R = 1 and T = 0. Approximately 41.8° for glass → air and 48.8° for water → air. It underpins optical fibres and waveguides.
Unpolarised light reflectance
R = (Rₛ + Rₚ) / 2
Natural light contains equal components of both polarisations, so the reflectance is their average — a common basis for coating and stray-light estimates.

Frequently asked questions (FAQ)

What are the Fresnel equations?

The Fresnel equations describe the amplitude reflection coefficient r and amplitude transmission coefficient t for light at the interface between two media, for s (perpendicular) and p (parallel) polarisations. The reflectance is R=|r|², while the transmittance must include the cosine ratio. For non-absorbing media, R + T = 1 holds strictly for both polarisations, expressing energy conservation.

Why must the transmittance formula include the cosine ratio?

Because the propagation direction changes on refraction, the beam cross-sectional area changes by the factor n₂cosθ₂/(n₁cosθ₁). Simply squaring the amplitude to obtain power gives the wrong answer, hence T = (n₂cosθ₂/n₁cosθ₁)|t|². Omitting this factor is the most common beginner’s error.

What is the Brewster angle?

When the angle of incidence is θ_B = arctan(n₂/n₁), the reflection coefficient for p polarisation is exactly zero; this is the Brewster angle, about 56.3° for air → glass. At this angle the s-polarised reflectance is still about 14.8%, so it is not a ‘zero-reflection angle’.

What are the conditions for the critical angle and total internal reflection?

A critical angle θ_c = arcsin(n₂/n₁) exists only when light travels from a denser to a rarer medium (n₁ greater than n₂). Once the angle of incidence exceeds θ_c, the refraction angle has no real solution and all the light is reflected back into medium 1, giving R = 1 and T = 0 — this is total internal reflection.

What happens at grazing incidence (approaching 90°)?

As the angle of incidence approaches 90°, the reflectance of both polarisations tends to 1 (complete reflection). This is an asymptotic process rather than a sudden jump to 1 at a specific angle, so the tool displays close to 100% rather than exactly 100% at 89.9999°.

How do I read the reflectance curves?

The upper plot shows Rₛ, Rₚ and unpolarised R over the full 0–90° range. The lower plot zooms in near the Brewster angle: the red Rₚ curve dips to zero here, the key region for suppressing p-polarised stray light and designing polarising beam splitters; the Rₛ curve remains well above Rₚ throughout.

Why can’t this tool calculate the reflectance of metals?

This tool is written for non-absorbing, non-magnetic media (real refractive indices), where R + T is identically 1. Metals require a complex refractive index n − ik, the Fresnel equations must be rewritten in complex form, and the reflectance no longer satisfies R + T = 1. For metals and absorbing media, please calculate separately using a complex refractive index.

What is the sign convention for the p component?

This tool uses rₚ = (n₂cosθ₁ − n₁cosθ₂)/(n₂cosθ₁ + n₁cosθ₂), giving rₚ = −rₛ = (n₂−n₁)/(n₂+n₁) at normal incidence. Physically the two sign conventions are equivalent; what matters is that the power reflectance and the normal-incidence value remain continuous. The reflectance itself is unaffected by this sign choice.

Can real coatings achieve zero reflection?

A single interface cannot eliminate reflection; air → glass at normal incidence still gives about 4%. In practice anti-reflection coatings (a single quarter-wave layer with refractive index √(n₁n₂), or broadband multilayer stacks) reduce the reflectance to a few parts per thousand. This tool gives the Fresnel reflectance of an uncoated bare interface.

How can I use it to estimate stray light in an optical system?

Simply sum the R of each air–glass interface. For example, an optomechanical system with six glass elements has twelve air–glass interfaces; before coating, the total surface reflectance is about 1 − (1−0.04)¹² ≈ 39%, which is the stray light that anti-reflection coatings must suppress.

What are the unit conventions for the calculated results?

The refractive index n is a dimensionless ratio, and angles of incidence and refraction are in deg. r and t are amplitude coefficients (dimensionless, may be negative), while R and T are power percentages. Internally the tool computes angles in radians to ensure accuracy.

中文EN