QQ: 859818709

RayTools BF04K / BF06K Dual-Model Wobble Welding Head, 4 kW / 6 kW, 30 mm, formerly BF330-4F/6F

RayTools BF04K / BF06K Dual-Model Wobble Welding Head, 4 kW / 6 kW, 30 mm, formerly BF330-4F/6F

Price on request
Category:

Description

Product Overview

The BF04K and BF06K are the two entry tiers of the RayTools BF wobble welding head family and the current designations for the former BF330-4F and BF330-6F. A single body is offered at 4 kW and at 6 kW, both built around a 30 mm clear aperture, so the shop that starts on thin sheet and later adds thicker sections does not have to change the optics ecosystem, the consumables or the mounting. Collimation is available at 100 mm or 150 mm and focusing from 200 mm to 400 mm; the four combinations move the beam from a tight, high-intensity spot to a wider and softer arc across a gapped joint. The maximum scan range of this structure is up to 2800 mm, which covers remote welding and remote cleaning over a large working field, while normal seam wobble is run at a much smaller amplitude set by the process. Two protective windows of 37 mm diameter and 5 mm thickness sit in the beam path, and the air-cooled window design takes the consumable out of the water circuit, which is where most of the running cost of a welding head is actually decided. The complete head weighs about 6.6 kg.

On mounting, the BF04K and BF06K are supplied as handheld welding heads, and the same body is also mounted on automated platforms and special-purpose machines. The choice of how the head is carried therefore follows the job rather than the model: the same optical assembly is used on an operator’s arm and on a gantry, a column or a robot station, and the interface, the cable routing and the safety enclosure are agreed at order. If a project mixes manual tacking with automated seam welding, one model can cover both.

Key Features

  • Two power tiers, one body: 4 kW as the BF04K and 6 kW as the BF06K, so capacity can be bought to match the workload instead of the catalogue
  • 30 mm clear aperture: keeps the beam clear of the lens edges at both power levels and leaves room for wobble amplitude without clipping
  • Four optic combinations: 100 mm or 150 mm collimation with 200 mm to 400 mm focusing, from tight keyhole work to a wide, forgiving arc
  • Scan range up to 2800 mm: the largest scan figure of this structure, used for remote welding and remote cleaning over a broad field
  • Twin protective windows: two 37 x 5 mm windows in series, so a spatter strike on the outer window does not stop production
  • Air-cooled window, maintenance-free design: no water connection at the consumable, which simplifies daily upkeep and cuts downtime
  • About 6.6 kg: light enough for sustained manual work and stiff enough to stay stable on a moving platform
  • Direct successor naming: BF330-4F becomes BF04K and BF330-6F becomes BF06K, with the function set carried over

Technical Specifications

Brand Empower / RayTools
Model BF04K / BF06K (formerly BF330-4F / BF330-6F)
Type Wobble laser welding head, handheld body that also mounts on automated platforms
Power 4 kW / 6 kW
Clear Aperture 30 mm
Collimation Focal Length 100 mm, 150 mm
Focusing Focal Length 200-400 mm
Max Scan Range up to 2800 mm
Protective Window 37 x 5 mm, dual window
Window Cooling Air-cooled, maintenance-free design
Weight approx. 6.6 kg

Applications

The BF04K and BF06K are aimed at production welding where the seam is long, the parts repeat and the fit-up is not perfect. Typical work includes wobble welding of sheet and plate fabrications, frames, cabinets, enclosures and general metal products where an oscillating beam widens the melt pool and bridges a gap that a straight spot would leave open; batch welding of thin to medium sections on a fixture or a positioner; and remote work over a wide field, where the up to 2800 mm scan range lets the head reach a seam without moving the arm. Because the same body is used on automated platforms, the pair also fits special-purpose machines and robot stations that weld one family of parts all day.

The head is equally usable for repair and rework, where a portable unit has to be carried to a part that cannot be moved, and for pre-production trials in which the weld procedure is proved by hand before the cell is built. If the joint needs filler wire, a wire feeder can be added to the process package; if the section grows beyond the 6 kW tier, the BF12K and BF20K in the same family take over with a 45 mm aperture. Tell us the material, the sheet thickness and the required weld width and we will confirm which tier and which optic pair fit the job.

Selection Guide

  • Start from the power tier, not the price: the BF04K covers everyday sheet and thin-plate welding where travel speed is moderate, while the BF06K is chosen when the same shop also runs thicker sections, needs headroom for faster travel, or wants margin for a wider wobble at the same energy per unit length.
  • Fix the optics on the joint, not on habit: 100 mm collimation with 200 mm focusing is the usual starting point for a narrow seam with good depth of focus; step up to 150 mm collimation and a longer focusing length when the joint is gapped, the surface is uneven, or the head has to stand off further from the part.
  • Decide the scan duty separately: the up to 2800 mm figure is the maximum scan specification of the structure and belongs to remote welding and remote cleaning; for seam wobble, set a small amplitude and a frequency that matches the travel speed, or the melt pool is stirred faster than it can consolidate.
  • Plan the mounting with the order: state at enquiry whether the head will be hand-held, bolted to a special-purpose machine or flanged to a robot. The optical assembly is common, but the interface, the cable length and the guarding are not, and agreeing them late is the usual cause of a delay at commissioning.
  • Budget the consumables up front: keep spare 37 x 5 mm windows in stock from day one. A contaminated window costs power, widens the seam and raises porosity long before it fails visibly, and a spare in the drawer is the difference between a ten-minute change and a lost shift.
  • Use the old part numbers to cross over: BF330-4F maps to BF04K and BF330-6F maps to BF06K. For an existing machine, send us the old nameplate and a photo of the mounting flange and we will confirm the mechanical and optical match before you order.

Usage Precautions

  • Never look into the beam or into specular reflections while the laser is running. Mark the working area with warning signs, fit protective screens and have everyone wear goggles rated for the wavelength in use.
  • Use purified or deionised water in the cooling circuit and change it on schedule. If temperature or flow alarms, stop the machine, find the cause and only then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
  • Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
  • The protective window on this head is air-cooled and designed to run maintenance-free, but it still has to be inspected at every shift change: spatter, dust and finger marks all absorb power, and a marked window should be replaced rather than cleaned and reused.
  • Set the wobble amplitude and frequency in the programme before the beam is enabled, and check the first part on a scrap coupon. Running a welding programme with the wrong amplitude does not show up as an alarm, only as a seam that is too wide, too shallow or porous.
  • Check the shielding gas flow and the nozzle condition with the head in its working attitude. A distorted nozzle or a partly blocked gas path changes the plume, and the resulting oxidation appears on the finished weld rather than at the machine.
  • On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

Which model replaces the former BF330-4F and BF330-6F?
Under the current RayTools naming the 4 kW version is the BF04K and the 6 kW version is the BF06K. The function set and the 30 mm aperture carry over; only the designation changed.

How should collimation and focusing be paired?
Choose the pair from the weld width and the depth of field you need. The usual starting point is 100 mm collimation with 200 mm focusing, then move to 150 mm collimation or a longer focusing length when the joint is gapped or the surface is uneven.

Is the up to 2800 mm scan figure meant for welding?
It is the maximum scan specification of this structure and belongs to remote welding and remote cleaning over a large field. Seam wobble in normal production is run at a much smaller amplitude, set by the process rather than by the head’s limit.

Can the same head be used by hand and on a machine?
Yes. The BF04K and BF06K are supplied as handheld welding heads and the same body is mounted on automated platforms and special-purpose machines. Tell us the mounting at enquiry so the interface and cable set are supplied for the intended use.

What happens when the section is too thick for 6 kW?
Move up to the BF12K or BF20K in the same family, which carry a 45 mm clear aperture and about 7.5 kg. The optics, the consumable logic and the mounting approach stay familiar, so the operating team does not start over.

Series Comparison

Model BF04K | BF06K
Power 4 kW | 6 kW
Clear Aperture 30 mm | 30 mm
Collimation 100 / 150 mm | 100 / 150 mm
Focusing 200-400 mm | 200-400 mm
Max Scan Range up to 2800 mm | up to 2800 mm
Protective Window 37 x 5 mm dual | 37 x 5 mm dual
Weight approx. 6.6 kg | approx. 6.6 kg
Former Designation BF330-4F | BF330-6F
Typical Choice sheet and thin plate, moderate travel speed | thicker sections, faster travel, wider wobble margin

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.

Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools BF04K / BF06K Dual-Model Wobble Welding Head, 4 kW / 6 kW, 30 mm, formerly BF330-4F/6F”

Your email address will not be published. Required fields are marked *

中文EN