Description
Product Overview
The BF12K / BF20K is the ultra-high power wobble welding head from Empower / RayTools. The two power classes cover 1-12 kW and 1-20 kW respectively, and a 45 mm large-diameter lens group works with lens water cooling and temperature monitoring to keep 10 kW class wobble welding stable over long runs. A built-in CCD port monitors the seam in real time, and the head weighs about 7.5 kg. Deep penetration on thick plate and the wobble process are available together, which makes it the flagship configuration for heavy-industry welding automation.
Key Features
- 12 / 20 kW dual power class: match the model to the laser power
- 45 mm large lens diameter: carries ultra-high power density
- Temperature monitoring: real-time warning on lens condition
- CCD port: real-time seam monitoring
- Water-cooled lenses: long runs at high power
Technical Specifications
| Brand | Empower / RayTools |
| Model | BF12K / BF20K |
| Type | Ultra-high power wobble welding head |
| Power | 1-12 kW / 1-20 kW |
| Lens Diameter | 45 mm |
| Cooling | Lens water cooling |
| Monitoring | CCD + temperature monitoring |
| Weight | approx. 7.5 kg |
Applications
10 kW class wobble welding, deep penetration on thick plate, and automated welding in shipbuilding and heavy industry. The head also suits comparable processing duties under similar conditions; non-standard customisation and volume solutions can be discussed, and drawings or process requirements can be submitted for a detailed evaluation.
Selection Guide
- Welding heads are selected with headroom below the maximum laser power; the weld spot width is directly related to the focusing lens focal length, and a special weld width needs a custom lens set – send us your seam requirements for an evaluation.
- The protective lens is a consumable: buy spares together with the machine and keep them in stock. A contaminated lens causes power loss, a wider bead and a higher porosity rate.
- Models in the same series differ in power, clear aperture, interface and function modules; for volume purchase or line matching, sample trials and a solution evaluation can be requested.
- This item is genuine original factory stock and ships with a packing list and warranty document; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing consumables such as lenses and seals.
- This model is the BF12K / BF20K wobble welding head; the key specifications are in the table above. For a different power class, aperture or interface, contact us for a series comparison and a quotation.
Usage Precautions
- Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
- Use purified or deionised water in the water-cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
- When replacing the protective lens inside the barrel, make sure the sealing ring is pressed home; a gas path that does not hold pressure will accelerate lens contamination.
- On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
How do I choose between the BF12K and the BF20K?
For routine medium and thick plate the BF12K is sufficient; where the plate is thicker and higher speed is wanted, choose the BF20K. Either way the head is matched to the laser power.
What does high-power wobble demand of the water cooling?
The lenses are water cooled internally, and the external circulating water pressure and flow must meet the manual requirements; a dual-circuit chiller is recommended.
How does it differ from the BW12K?
The BF carries the wobble process while the BW is a transmissive fixed-spot head; choose the BW for penetration and speed, the BF for seam appearance.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.









Reviews
There are no reviews yet.