Description
Product Overview
The BF12U is the programmable wobble welding head in the RayTools ultra-high power range and the current designation for the former BF391-12K. The difference from a conventional wobble head is where the pattern lives: instead of a fixed weave set by the optics and the drive, the oscillation path is defined by the process, so a circle, a figure-eight, a straight oscillation or another shape can be assigned to a joint and changed when the joint changes. At 12 kW the head still has the deep-penetration capability of the ultra-high power tier, but the engineer gains direct control over seam width, dilution and bead appearance, which is what decides acceptance in high-end fabrication.
A coaxial CCD is available as an option, so the weld pool and the seam can be watched while the pattern runs, and the same image can be recorded as evidence that the procedure was followed. The structure is built for integration: it mounts on special-purpose machines and on robot stations, and the pattern, the travel and the wire feed are synchronised by the machine control rather than by the operator’s hand. That combination, a programmable pattern on a twelve-kilowatt head with a monitored process, is what makes the model suitable for work where seam consistency is the acceptance criterion rather than a target.
Key Features
- Programmable wobble pattern: the oscillation shape is set by the process, so circle, figure-eight, line and other patterns can be assigned per joint
- 12 kW output: keeps the deep-penetration capability of the ultra-high power tier while the pattern controls how the energy is distributed
- Controllable seam formation: width, dilution and bead profile follow the pattern and the travel, which is how a consistent seam is held over a long run
- Coaxial CCD option: live view of the pool and the seam, and a record that the procedure was followed
- Built for integration: mounts on special-purpose machines and robot stations, with the pattern synchronised to the machine control
- Successor to the BF391-12K: the programmable role is carried forward under the new designation without a change of duty
Technical Specifications
| Brand | Empower / RayTools |
| Model | BF12U (formerly BF391-12K) |
| Type | Programmable wobble ultra-high power laser welding head |
| Power | 12 kW |
| Wobble | Programmable pattern |
| Monitoring | Coaxial CCD, optional |
Applications
The BF12U is used where the seam has to be right the first time and stay right for the whole batch. Typical work is high-end fabrication in which the bead profile, the penetration and the dilution are all specified and inspected; automated welding lines that run one family of parts and need the pattern to change with the joint rather than with the head; and thick-section work in which a straight weave would leave lack of fusion at the root but a programmable pattern reaches it. The same programmability helps where the fit-up varies from part to part, because the pattern can be tuned to bridge the gap without changing the optics.
The model is also used in process development, where several patterns are compared on the same joint before a procedure is released, and in repair work on high-value components, where the seam is short but the acceptance criteria are strict. If the pattern does not need to be programmable, the BF12K and BF20K do the same power class with a fixed weave; if the section is smaller, the BF04K and BF06K cover it at 30 mm aperture. Describe the joint, the material and the inspection standard and we will confirm whether a programmable pattern is the right tool or whether a fixed weave will pass.
Selection Guide
- Buy the programmability only when the joint needs it: a fixed weave is cheaper and perfectly adequate for a constant seam. The BF12U earns its place when the seam width varies along the joint, when several joint types run on one machine, or when the pattern has to be tuned during procedure development.
- Reserve power headroom against the laser: size the head for the upper limit of the laser it will run on, not for the average setting. A head specified at the working point has no margin for the trial runs and the occasional heavier part that every production line eventually sees.
- Take the CCD option if the seam is inspected: on a programmable head the pattern is only half the evidence; the other half is the image. A recorded view of the pool and the seam is what turns a parameter sheet into a defensible procedure.
- Agree the integration before the order: the head mounts on special-purpose machines and robot stations, and the pattern has to be synchronised with the machine control and, where used, with the wire feeder. Send us the control platform and the robot model so the interface and the signal list are fixed early.
- Stock the consumables: protective windows are consumables and should be bought with the head. A contaminated window costs power, widens the seam and raises porosity, and on a programmable head it also distorts the pattern the engineer worked to establish.
- Plan the procedure around the pattern, not the other way round: define the pattern, the amplitude and the travel speed together on a coupon, then lock them into the program. Changing the pattern to chase a fit-up problem without re-qualifying the procedure is how a good head produces an unacceptable seam.
Usage Precautions
- Never look into the beam or into specular reflections while the laser is running. Mark the working area with warning signs, fit protective screens and have everyone wear goggles rated for the wavelength in use.
- Use purified or deionised water in the cooling circuit and change it on schedule. If temperature or flow alarms, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
- Define the wobble pattern, its amplitude and the travel speed together, and prove them on a coupon before the program is released. A pattern that is correct in isolation can still be wrong for the joint once the travel speed is applied.
- When a protective window is changed, check that the seal is seated and pressed home. A gas path that does not hold pressure draws spatter towards the lens and shortens the life of every window that follows.
- Keep the CCD view clean if the option is fitted, and confirm the image before each run. A blurred image is worse than none, because the operator stops trusting the view and stops checking the seam.
- Record the pattern and the parameters with the part, not only in the machine. When the same joint returns a year later, the record is what makes the seam reproducible.
- On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
Can the wobble pattern be customised?
Yes. The pattern is programmable, and shapes such as a circle, a figure-eight and a straight oscillation are assigned by the process. Which shapes are available for a given control platform is confirmed at order.
Which model replaces the former BF391-12K?
The BF12U. Under the current RayTools naming the programmable twelve-kilowatt role is carried forward, and the duty and the integration approach are unchanged.
Is it suitable for automation?
Yes. The structure is designed for special-purpose machines and robot integration, and with the coaxial CCD option the process can be monitored while it runs.
Do I need the programmable version at all?
Only if the joint or the product mix calls for it. For a constant seam at a constant width, the BF12K or BF20K with a fixed weave is the simpler and cheaper answer.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.









Reviews
There are no reviews yet.