Description
Product Overview
The BF12U is the programmable wobble welding head from Empower / RayTools. Power coverage is 1-12 kW, and the wobble path, frequency and amplitude are all freely programmable, which breaks free of preset patterns and gives the highest process freedom in the wobble family. Lens water cooling, temperature monitoring and a CCD port are all fitted, so the head suits dissimilar-material welding, precision welding of thin sheet and aluminium alloy welding – duties that depend on fine control of heat input.
Key Features
- Programmable wobble: path, frequency and amplitude user-defined
- 1-12 kW: medium-to-high power coverage
- Highest process freedom: suited to dissimilar materials and aluminium alloy
- Temperature monitoring + CCD: lens condition and seam both watched
- Water-cooled lenses: stable over long runs
Technical Specifications
| Brand | Empower / RayTools |
| Model | BF12U |
| Type | Programmable wobble laser welding head |
| Power | 1-12 kW |
| Wobble | Programmable (path / frequency / amplitude) |
| Cooling | Lens water cooling |
| Monitoring | CCD + temperature monitoring |
Applications
Welding of dissimilar materials, aluminium alloy welding, precision welding of thin sheet, and process development. The head also suits comparable processing duties under similar conditions; non-standard customisation and volume solutions can be discussed, and drawings or process requirements can be submitted for a detailed evaluation.
Selection Guide
- Welding heads are selected with headroom below the maximum laser power; the weld spot width is directly related to the focusing lens focal length, and a special weld width needs a custom lens set – send us your seam requirements for an evaluation.
- The protective lens is a consumable: buy spares together with the machine and keep them in stock. A contaminated lens causes power loss, a wider bead and a higher porosity rate.
- Models in the same series differ in power, clear aperture, interface and function modules; for volume purchase or line matching, sample trials and a solution evaluation can be requested.
- This item is genuine original factory stock and ships with a packing list and warranty document; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing consumables such as lenses and seals.
- This model is the BF12U programmable wobble welding head; the key specifications are in the table above. For a different power class, aperture or interface, contact us for a series comparison and a quotation.
Usage Precautions
- Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
- Use purified or deionised water in the water-cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
- When replacing the protective lens inside the barrel, make sure the sealing ring is pressed home; a gas path that does not hold pressure will accelerate lens contamination.
- On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
What does programmable wobble actually add?
Any path outside the preset patterns – a spiral or a curve, for example – can be programmed, which solves difficult seams and awkward material combinations.
How is the programming done?
Path parameters are set in the Empower control system process software, and process packages can be saved and recalled.
BF12U or BF12K?
Choose the BF12U where a custom path process is required; for standard wobble patterns the BF12K is better value.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.









Reviews
There are no reviews yet.