QQ: 859818709

RayTools BW03K 3 kW Transmissive Laser Welding Head, 25 mm Aperture, 1064/830-1030/450 nm

RayTools BW03K 3 kW Transmissive Laser Welding Head, 25 mm Aperture, 1064/830-1030/450 nm

Price on request
Category:

Description

Product Overview

The BW03K is a 3 kW transmissive laser welding head from Empower / RayTools. The multi-wavelength design accepts 1064 nm fiber, 830-1030 nm diode and 450 nm blue laser sources, so it is equally suitable for ferrous and non-ferrous metals. The clear aperture is 25 mm, with a choice of 100 / 125 / 150 mm collimation and 150-300 mm focusing. A Ø27.9×4.1 mm protective lens, no water-cooling interface and a weight of about 3 kg keep the machine simple; on thin sheet at high speed the bead is smooth and bright, which makes it the cost-effective choice at mid-low power.

Key Features

  • Multi-wavelength compatibility: three wavelengths, 1064 / 830-1030 / 450 nm
  • High-speed thin-sheet welding: smooth, bright weld beads
  • No water cooling, low weight: about 3 kg simplifies the machine build
  • Drawer-type lens mount: quick to replace
  • CCD ready: standard C/CS interface

Technical Specifications

Brand Empower / RayTools
Model BW03K
Type Transmissive laser welding head
Power up to 3 kW
Wavelength 1064 nm / 830-1030 nm / 450 nm
Fiber Interface QBH standard (QD optional)
Clear Aperture 25 mm
Collimating Focal Length 100 / 125 / 150 mm
Focusing Focal Length 150 / 200 / 250 / 300 mm
Protective Lens Ø27.9×4.1 mm
Water Cooling Interface none
Gas Interface Ø8 mm
Dimensions 323.3×140.4 mm (F100 collimation, 0° version)
Weight approx. 3 kg

Applications

Consumer electronics, automotive components, precision welding of thin sheet and other mid-low power duties. The head also suits comparable processing duties under similar conditions; non-standard customisation and volume solutions can be discussed, and drawings or process requirements can be submitted for a detailed evaluation.

Selection Guide

  • RayTools welding heads are selected by power class and process type: for hand-held work choose the BW/BH series, for automated platforms and dedicated machines the BF series, and for filler-wire processes the BP coaxial wire-feed or GW push-pull wire models.
  • Optional modules such as coaxial CCD and temperature monitoring are specified according to line requirements; set the protective lens replacement interval and the cleaning frequency from shift output, and keep an inspection record.
  • Models in the same series differ in power, clear aperture, interface and function modules; for volume purchase or line matching, sample trials and a solution evaluation can be requested.
  • This item is genuine original factory stock and ships with a packing list and warranty document; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing consumables such as lenses and seals.
  • This model is the BW03K transmissive laser welding head; the key specifications are in the table above. For higher power, a larger aperture or a different interface or focal length, contact us for a series comparison and a quotation.

Usage Precautions

  • Never look directly into the beam or into specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective goggles matched to the wavelength in use.
  • Use purified or deionised water in the cooling circuit and change it regularly; if water temperature or flow alarms, stop the machine, find the cause and only then restart.
  • Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
  • Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
  • Configure the cooling water flow of the laser source and the machine cooling circuit as stated in the manual: water that is too cold causes condensation and water that is too hot reduces power; if the inlet-to-outlet temperature difference is abnormal, check the water circuit first.
  • On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

Why is the head compatible with three wavelengths?
The transmissive lens set is designed for a wide band, so one head can be matched to fiber, diode and blue sources, which makes system integration more flexible.

Does running without water cooling shorten the service life?
At 3 kW the thermal load is manageable; the collimating and focusing lenses stay stable on structural heat dissipation alone.

Can a CCD be fitted?
A standard C/CS interface is reserved; an optional high-definition CCD gives real-time monitoring of the weld seam.

Disclaimer

The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.

Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools BW03K 3 kW Transmissive Laser Welding Head, 25 mm Aperture, 1064/830-1030/450 nm”

Your email address will not be published. Required fields are marked *

中文EN