Description
Product Overview
The D125E rotary fixture is a 3-jaw chuck rotary axis designed for fiber laser marking machines, fitted with a D125 chuck of 125 mm diameter. It uses a high-quality cast-iron 3-jaw chuck with moderate hardness, stable clamping, accurate positioning, smooth running and a low friction coefficient. The fixture supports stepless 0°-90° tilt adjustment with manual locking, adapting flexibly to different workpiece angles. An industrial-standard aviation connector makes it compatible with most fiber laser marking machine control boards — plug and play. Supplied with a stepper motor and driver and driven by a timing belt for smooth, quiet operation, it is an ideal rotary accessory for cylindrical laser marking, welding and cutting.
Key Features
-
🔩 Premium cast-iron 3-jaw chuck
A high-grade cast-iron 3-jaw self-centring chuck offers moderate hardness, even clamping force and high positioning accuracy. The three jaws move in sync to centre the workpiece automatically, eliminating manual jaw-by-jaw adjustment and greatly improving setup efficiency. Precision-machined surfaces ensure smooth running, a low friction coefficient and long wear life. -
📐 Stepless multi-angle adjustment
Stepless 0°-90° tilt adjustment with manual locking provides stable positioning. 0° is horizontal and 90° vertical, with any intermediate angle selectable. This flexibility handles cups, tubes, rings and other workpiece shapes on a single machine. -
🔌 Industrial standard aviation connector
An industrial-standard aviation connector is directly compatible with most fiber laser marking and engraving machine control boards. Plug and play with no extra modification or rewiring, cutting system integration time and cost. -
⚙️ Stepper motor with timing-belt drive
Equipped with a 60 × 88 mm stepper motor and DM542 driver, the timing-belt drive provides a 2.5:1 reduction for high torque and smooth rotation. Belt drive keeps noise and vibration low, ensuring consistent marking accuracy throughout rotation. A Ø24 mm through hole allows long shafts to pass through for processing. -
🔧 Easy installation
Mounting holes on a 100 × 50 mm pattern (M5/M6) allow direct installation on the laser machine worktable. A 115 mm centre height matches a lift table for precise focal-position adjustment. The E version is the standard model with a 3-jaw self-centring chuck and high positioning accuracy, suited to standard cylindrical workpieces.
Detailed Specifications
| Parameter | Specification |
|---|---|
| Model | D125E rotary fixture |
| Chuck type | D125 mm 3-jaw self-centring chuck |
| Clamping range A (external) | 2.5 – 40 mm |
| Clamping range B (internal) | 40 – 110 mm |
| Clamping range C (reverse jaws) | 35 – 95 mm |
| Tilt adjustment | 0° – 90° |
| Motor | 60 × 88 mm stepper motor |
| Driver | DM542 driver |
| Transmission | Timing belt, 2.5:1 reduction |
| Through-hole diameter | Ø24 mm |
| Centre height | 115 mm |
| Dimensions | 280 × 130 × 200 mm |
| Mounting hole pattern | 100 × 50 mm (M5/M6) |
| Weight | 9.5 kg |
| Interface | Industrial standard aviation connector |
}
Technical Notes
The rotary fixture drives the 3-jaw chuck via a stepper motor and works in coordination with the marking machine’s galvo motion to mark cylindrical workpieces through a full 360°. During operation the galvo scans along the X axis while the fixture indexes in the rotational direction, the two together covering the entire cylindrical surface. Chuck clamping has three modes — external (A), internal (B) and reverse jaws (C) — to suit different workpiece shapes and sizes. The 2.5:1 timing-belt reduction provides ample torque together with fine angular resolution for consistent marking quality. During installation make sure the rotary axis is perpendicular to the laser beam and that the centre height matches the focal height.
Typical Applications
- Laser marking on stainless steel vacuum flasks
- Laser engraving of rings, bracelets and jewellery
- Lettering on pen barrels and tubes
- Laser marking of bearing inner and outer rings
- Rotary support for laser welding of valves and flanged pipe fittings
Selection Guide
First confirm the maximum workpiece diameter — the chuck size should exceed it. D69 suits small workpieces (rings, pen barrels), D80 medium workpieces (vacuum flasks, small tubes), and D100/D125 large workpieces (large-diameter pipe, bearings). The E version is standard, the F version is reinforced (higher torque), the C version is compact, and the low-profile version suits machines with limited Z-axis space. Roller-type fixtures suit long, slender workpieces that cannot be held in a chuck. Confirm that the machine’s control board driver interface is compatible before ordering.
Series Comparison
| Model | Chuck diameter | Clamping range (external) | Tilt | Weight |
|---|---|---|---|---|
| D69E | Ø69 mm | 1 – 20 mm | 0° – 90° | 3.2 kg |
| D80E | Ø80 mm | 2 – 22 mm | 0° – 90° | 4.6 kg |
| D100E | Ø100 mm | 2 – 30 mm | 0° – 90° | 7.0 kg |
| D125E | Ø125 mm | 2.5 – 40 mm | 0° – 90° | 9.5 kg |
}
About the Brand
Changsha Soar Laser Equipment Co., Ltd. specialises in the research, development and manufacture of laser processing equipment accessories, focusing on laser rotary fixtures, optical tables and laser components. Its products are known for high precision, high stability and excellent cost performance, widely used to upgrade fiber laser marking and welding machines, and trusted by laser equipment manufacturers and end users at home and abroad.
Contact Us
For more product information or a quotation, please contact our technical sales team:
📞 Hotline: +86 159-2722-0467
We provide professional technical selection support, volume purchase discounts and comprehensive after-sales service.









Reviews
There are no reviews yet.