QQ: 859818709

D69C Compact Rotary Fixture, 69 mm 3-Jaw Chuck for Fiber Laser Marking

D69C Compact Rotary Fixture, 69 mm 3-Jaw Chuck for Fiber Laser Marking

Price on request
SKU: LAS-37222522-EN
Category:

Description

Product Overview

The D69C rotary fixture uses a compact design with a small footprint for installation spaces that are tight on room; the D69 chuck has a diameter of 69 mm. The fixture is built on a high-quality cast iron three-jaw chuck with moderate hardness, stable clamping, accurate positioning, smooth rotation and low friction. It supports stepless 0° – 90° tilt adjustment with manual locking, so different workpiece angles can be handled flexibly. An industrial standard aviation connector makes it compatible with the control boards of most fiber laser marking machines – plug and play. A stepper motor and driver are included as standard, with timing belt drive for smooth, quiet rotation. It is the ideal rotary accessory for laser cylindrical marking, welding and cutting.

Key Features

  • 🔩 High-quality cast iron three-jaw chuck
    A high-grade cast iron three-jaw self-centering chuck with moderate hardness, uniform clamping force and high positioning accuracy. The three jaws move synchronously so the workpiece self-centers without jaw-by-jaw adjustment, greatly improving clamping efficiency. The chuck surface is finely machined for smooth rotation and low friction, and resists wear over long service life.
  • 📐 Stepless multi-angle adjustment
    Stepless tilt adjustment from 0° to 90° with manual locking for stable positioning. 0° is horizontal, 90° is vertical, and any intermediate angle can be set. This flexible angle adjustment handles cups, tubes, rings and other workpiece shapes with one machine.
  • 🔌 Industrial standard aviation connector
    The industrial standard aviation connector is directly compatible with the control boards of most fiber laser marking and engraving machines. Plug and play with no extra modification or rewiring, saving integration time and cost.
  • ⚙️ Stepper motor with timing belt drive
    Equipped with a 42×40 mm stepper motor and a DM420 driver, the timing belt drive provides a 2.5:1 speed reduction for high torque and smooth rotation. Belt drive keeps noise and vibration low so marking accuracy stays consistent during rotation. The through-hole design (Ø12 mm) allows long shafts to pass through for processing.
  • 🔧 Easy installation
    The 70 × 45 mm (M5) mounting hole pattern mounts directly on a laser machine worktable. The 75 mm axis center height allows precise focus adjustment with a lifting table. The compact C-version design is small and light, ideal for integration into compact laser systems.

Technical Specifications

Parameter Specification
Product model D69C rotary fixture
Chuck specification D69 mm three-jaw self-centering chuck
Clamping range A (external) 1 – 20 mm
Clamping range B (internal) 20 – 60 mm
Clamping range C (reverse jaws) 18 – 52 mm
Tilt angle adjustment 0° – 90°
Motor 42×40 mm stepper motor
Driver DM420 driver
Transmission Timing belt, 2.5:1 reduction
Through-hole diameter Ø12 mm
Axis center height 75 mm
Dimensions 165 × 90 × 130 mm
Mounting hole pattern 70 × 45 mm (M5)
Weight 3.2 kg
Interface Industrial standard aviation connector

Technical Notes

The rotary fixture drives the three-jaw chuck through a stepper motor and works together with the galvo motion of the laser marking machine to mark cylindrical workpieces through a full 360° revolution. During operation the galvo scans along the X axis while the rotary fixture indexes in the rotation direction; the two motions combine to mark the complete cylindrical surface. The chuck offers three clamping modes – external (A), internal (B) and reverse jaws (C) – for workpieces of different shapes and sizes. The 2.5:1 timing belt reduction provides sufficient torque together with fine angular resolution, ensuring marking quality. During installation, make sure the rotation axis is perpendicular to the laser beam and the axis center height matches the focal height.

Applications

  • Cylindrical laser marking on stainless steel vacuum cups and flasks
  • Laser engraving of rings, bracelets and other jewelry
  • Laser lettering on pen barrels and tube parts
  • Laser marking of bearing inner and outer rings
  • Auxiliary rotation for laser welding of valves and flange fittings

Selection Guide

When choosing a rotary fixture, first confirm the maximum workpiece diameter; the chuck size must be larger than the workpiece diameter. D69 suits small workpieces (rings, pen barrels, etc.), D80 suits medium workpieces (vacuum flasks, small tubes), and D100/D125 suit large workpieces (large-diameter pipes, bearings, etc.). The E version is standard, the F version is reinforced (higher torque), and the C version is compact; the low-profile version suits machines with limited Z-axis space. Roller-type fixtures suit slender workpieces that cannot be held in a chuck. Confirm the driver interface compatibility of your control board before ordering.

Series Comparison

Model Chuck diameter Clamping range (external) Tilt angle Weight
D69E Ø69 mm 1 – 20 mm 0° – 90° 3.2 kg
D80E Ø80 mm 2 – 22 mm 0° – 90° 4.6 kg
D100E Ø100 mm 2 – 30 mm 0° – 90° 7.0 kg
D125E Ø125 mm 2.5 – 40 mm 0° – 90° 9.5 kg

About the Brand

Changsha Soar Laser Equipment Co., Ltd. develops and manufactures accessories for laser processing equipment, specializing in laser rotary fixtures, optical tables and laser accessories. The company’s products are known for high precision, high stability and excellent cost performance, and are widely used to upgrade fiber laser marking machines and laser welding machines, earning the trust of laser equipment makers and end users at home and abroad.

Contact Us

For more product information or a quotation, please contact our technical sales team:

📞 Hotline: +86 159-2722-0467

We provide professional selection support, volume purchase discounts and comprehensive after-sales service.

Reviews

There are no reviews yet.

Be the first to review “D69C Compact Rotary Fixture, 69 mm 3-Jaw Chuck for Fiber Laser Marking”

Your email address will not be published. Required fields are marked *

中文EN