Description
Product Overview
On a machine whose CNC already runs an EtherCAT bus, the DAM + VBA-a closes the beam alignment loop without an operator at the nozzle. It combines the VBA visual calibration unit with the DAM automatic centring module: the camera images the red guide beam, an AI model with a high-precision circle-fitting routine locates it, and the DAM moves the beam back to the optical axis. What used to be a three to five minute manual adjustment becomes a single command issued over the bus, and the alignment lands under 0.08 mm, tighter than a hand adjustment can hold. The same board set carries the height-follow function, so centring and stand-off control are integrated in one package rather than bought as two boxes.
This is a beam alignment and sensing package, not a cutting head. It is specified by interface and by the head it will be fitted to, not by cutting power.
Key Features
- AI vision calibration: the red guide beam is imaged and located by an AI model with a high-precision circle-fitting algorithm, rather than by an operator eye
- Automatic centring: the DAM module drives the beam back to the centre position once the offset is computed, with no manual screw adjustment
- Under 0.08 mm: alignment accuracy well beyond what hand adjustment achieves, which is the point of the product
- Seconds instead of minutes: replaces the three to five minute manual routine with a one-key cycle
- EtherCAT communication: the unit talks to the CNC over the EtherCAT bus, so the command, the result and the machine state stay in one control system
- Fixes cut quality symptoms: removes the four-side unevenness and bottom dross that come from a beam that is off centre
Technical Specifications
| Parameter | Specification |
|---|---|
| Calibration method | red light recognition |
| Calibration accuracy | under 0.08 mm |
| Communication | EtherCAT |
| VBA dimensions | 78 mm x 78 mm x 65 mm |
| VBA weight | 0.3 kg |
| Protective lens | 25 mm dia. x 1 mm |
| Power supply | internal lithium battery or 12 V supply |
| Industrial app | Android / iOS |
| Functions | beam centring plus height follow |
| Brand | Empower / RayTools |
The 0.08 mm figure is the alignment result at the beam, not a repeatability of the vision stage alone, and it is the number to quote when a customer asks why the automatic cycle is worth fitting. VBA mass and envelope are given because they decide whether the unit can be carried on a moving head or has to sit in a fixed station.
Operating Principle
A red guide beam is projected through the optical path onto the VBA target. The VBA camera captures the spot, the AI model rejects the glow and the spatter and fits a circle to the real beam profile, and the offset between the fitted centre and the optical axis is computed. The DAM module then corrects the beam position and the cycle repeats until the residual is inside tolerance. Because the whole sequence runs over EtherCAT, the CNC can trigger it as part of a tool change, a shift start or a head swap, and log the result.
Series Comparison
| Model | Function | Communication | Note |
|---|---|---|---|
| DAM+VBA-a (EtherCAT) | automatic | EtherCAT | centring plus height follow |
| DAM+VBA-a (RS485) | automatic | RS485 | centring plus height follow |
| VBA | vision recognition only | Wi-Fi | calibration only, no auto centring |
The two DAM+VBA-a versions carry the same centring and height-follow function and differ in the fieldbus they speak, which decides the machine they can be fitted to. The plain VBA is the vision-only unit: it measures and shows the offset, and the operator still turns the adjustment. Choose by the control architecture of the machine, not by the accuracy, because the accuracy is a property of the measuring and correction chain that both versions share.
Applications
Beam centring and coaxial alignment on laser cutting and laser processing machines, in cells where the CNC runs an EtherCAT bus and the alignment is expected to be part of the automated cycle rather than a manual setup step. Typical cases are new bus-based machines, multi-head installations where each head has to be brought back to centre after a swap, and lines where alignment data is logged with the production record.
Selection Guide
Specify the EtherCAT version when the machine controller is bus-based, when the alignment has to be triggered by the CNC program, or when results must be logged centrally. It is the natural choice for a new machine build and for line-level automation, because the unit becomes another node on the bus instead of a separate commissioning tool. For a machine without a bus, the RS485 version is the fit. Confirm the head it will be fitted to and the connector on the controller before ordering.
FAQ
Does the EtherCAT version need a separate commissioning box? No. The unit is a node on the bus, so the CNC triggers the alignment and reads the result directly. The industrial app on Android or iOS is there for setup, viewing and diagnostics, not as the operating path in production.
What causes the four-side unevenness this unit is meant to fix? A beam that is not on the optical axis enters the nozzle asymmetrically, so the kerf leans and one side of the cut comes out different from the other. Centring the beam removes that cause; it does not compensate for a worn nozzle or the wrong focus.
How is the unit powered? From an internal lithium battery or from a 12 V supply. The battery makes it usable as a portable check on a head that is not yet wired into the cabinet.
Disclaimer
Specifications are taken from the manufacturer data current at the time of publication and are subject to change without notice. The stated accuracy is the alignment result achieved on a correctly maintained optical path and must be confirmed for the head and the controller in your machine. Compatibility with a specific CNC or fieldbus master is checked case by case before shipment.
Contact Us
Changsha Soar Laser Equipment Co., Ltd. supplies this unit with a configuration check against your laser source, your cutting head and your controller. Hotline +86 159-2722-0467, e-mail 859818709@qq.com, www.soar-laser.cn.









Reviews
There are no reviews yet.