QQ: 859818709

RayTools EDS-3020 Laser Cutting I/O Board with Photoelectric Isolation

RayTools EDS-3020 Laser Cutting I/O Board with Photoelectric Isolation

Price on request
Category:

Description

Product Overview

The EDS-3020 is an RayTools I/O board dedicated to laser cutting: it gathers the input and output signals a cutting machine requires, and multiple I/O channels cover limit switches, interlocks, gas valves, following (height) control and other needs. Microsecond-level signal response keeps timing tight, the photoelectric isolation design gives strong immunity to electrical interference, and standard connectors make the board plug-and-play, greatly simplifying machine wiring and improving system reliability.

Key Features

  • Application-specific: designed for laser cutting
  • Multiple I/O channels: abundant inputs and outputs
  • Microsecond-level response: signals delivered in real time and reliably
  • Photoelectric isolation: strong interference immunity
  • Plug and play: fast connection through standard connectors

Technical Specifications

Brand Empower / RayTools
Model EDS-3020
Type Laser cutting dedicated I/O board
Response Microsecond level
Protection Photoelectric isolation
Interface Standard, plug and play

Applications

I/O signal integration in laser cutting machines and electrical outfitting for machine OEMs. Similar duty in other industries is equally suitable; non-standard versions and volume projects are supported — send your drawings or process requirements for a detailed evaluation.

Selection Guide

  • Confirm the control architecture first: the EDS-3020 is a conventional I/O board, whereas the EDS-C100 is an EtherCAT bus I/O board — select according to your control system.
  • Check the DI/DO channel count and the connector definition against the machine wiring diagram; the exact channel count is stated in the product datasheet.
  • Models in the same series differ in channel configuration, interfaces and function modules; sample trials and engineering evaluation are available for volume purchases or production-line integration.
  • This item is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing consumables such as lenses and seals.
  • This model is the EDS-3020 laser cutting I/O board, with key specifications listed in the table above. For a bus version or a different channel configuration, contact us for a series comparison and quotation.

Usage Precautions

  • Never look into the beam or its specular reflections while the laser is running; mark and shield the work area and have personnel wear goggles matched to the wavelength.
  • The cooling circuit of the complete machine must use purified or deionized water, replaced at regular intervals; when water temperature or flow alarms occur, stop the machine and investigate before restarting.
  • Electrical wiring and servicing must be carried out by a licensed electrician with lockout/tagout applied; the equipment must be reliably grounded against leakage and interference.
  • Protect the unit from moisture and dust during transport and storage; before a long idle period disconnect power and cover the unit against dust.
  • Lay out cabinet heat dissipation to specification, add duct filtration in dusty environments, and keep a backup of the machine parameters.
  • On arrival, check the model nameplate against the accessory list; for installation or commissioning support contact Changsha Soar Laser technical support (+86 159-2722-0467) for remote or on-site assistance.

FAQ

How many I/O points are there?
The board provides multiple DI/DO channels according to its specification; the exact number is confirmed in the product datasheet.

How does it differ from the EDS-C100?
The EDS-3020 is a conventional I/O board and the EDS-C100 is an EtherCAT bus I/O board; choose according to the control architecture.

Can it be used on welding equipment?
It is intended mainly for cutting applications; for welding I/O choose a dedicated RayTools welding control product.

Disclaimer

Specifications on this page are compiled from the manufacturer’s public information and existing documents and are provided for selection reference only. Product specifications are subject to the delivered unit, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change from batch to batch, so please confirm with us before ordering. Reproduction of the content of this page without written permission is prohibited.

Selection support: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools EDS-3020 Laser Cutting I/O Board with Photoelectric Isolation”

Your email address will not be published. Required fields are marked *

中文EN