QQ: 859818709

RayTools EMS-2000 Embedded Cutting and Welding Control System

RayTools EMS-2000 Embedded Cutting and Welding Control System

Price on request
Category:

Description

Product Overview

The EMS-2000 is an RayTools embedded cutting and welding control system for low-to-mid power laser processing. It supports both cutting and welding modes and integrates motion control with laser control in a single unit. The embedded, compact housing saves installation space inside the electrical cabinet, a process parameter library is built in, and open interfaces keep system integration straightforward, making it an economical control core for small and mid-size machines.

Key Features

  • Dual mode: cutting and welding in one system
  • Embedded and compact: saves cabinet space
  • Low-to-mid power match: the economical choice for small and mid-size machines
  • Process parameter library: faster setup and changeover
  • Open interfaces: flexible system integration

Technical Specifications

Brand Empower / RayTools
Model EMS-2000
Type Embedded cutting and welding control system
Applicable power Low to mid power
Process Cutting and welding dual mode
Interface Open (third-party integration)

Applications

OEM machines for low-to-mid power laser cutting and welding, and control of small dedicated machines. Similar duty in other industries is equally suitable; non-standard versions and volume projects are supported, so send your drawings or process requirements for a detailed evaluation.

Selection Guide

  • For a control system, first fix the servo architecture (EtherCAT bus or pulse) and the laser brand, then choose the matching system version so that interfaces are not mismatched.
  • The bus version offers simpler wiring, faster refresh and better expandability; when retrofitting older equipment, confirm the existing electrical interfaces first and choose a pulse or hybrid version where necessary.
  • Models in the same series differ in power class, interfaces and function modules; sample trials and engineering evaluation are available for volume purchases or production-line integration.
  • This item is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support are provided from the date of receipt as agreed, excluding wearing consumables such as lenses and seals.
  • This model is the EMS-2000 embedded cutting and welding system, with key specifications listed in the table above. For a higher power class or a different interface configuration, contact us for a series comparison and quotation.

Usage Precautions

  • Never look into the beam or its specular reflections while the laser is running; mark and shield the work area and have personnel wear goggles matched to the wavelength.
  • The cooling circuit must use purified or deionized water, replaced at regular intervals; when water temperature or flow alarms occur, stop the machine and investigate before restarting.
  • Electrical wiring and servicing must be carried out by a licensed electrician with lockout/tagout applied; the equipment must be reliably grounded against leakage and interference.
  • Protect the unit from moisture and dust during transport and storage; before a long idle period drain the water circuit, disconnect power and cover the unit against dust.
  • Lay out cabinet heat dissipation for the system and the drives to specification, add duct filtration in dusty environments, and back up system parameters regularly.
  • On arrival, check the model nameplate against the accessory list; for installation or commissioning support contact Changsha Soar Laser technical support (+86 159-2722-0467) for remote or on-site assistance.

FAQ

What is the difference between the EMS-2000 and the EDK-3000?
The EMS-2000 targets low-to-mid power machines and is more compact and economical; the EDK-3000 targets machines that need a fuller function set. Select by power class and required functions.

Which servos are supported?
Mainstream bus and pulse servos are supported; the exact combination depends on the system configuration.

Is a vision function available?
The standard configuration centres on motion and laser control; vision positioning is added as an option according to the project.

Disclaimer

Specifications on this page are compiled from the manufacturer’s public information and existing documents and are provided for selection reference only. Product specifications are subject to the delivered unit, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change from batch to batch, so please confirm with us before ordering. Reproduction of the content of this page without written permission is prohibited.

Selection support: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools EMS-2000 Embedded Cutting and Welding Control System”

Your email address will not be published. Required fields are marked *

中文EN