QQ: 859818709

LINOS 4401-547-000-26 Telecentric F-Theta Lens, 532 nm, f=100 mm, 46 x 46 mm

LINOS 4401-547-000-26 Telecentric F-Theta Lens, 532 nm, f=100 mm, 46 x 46 mm

$9,014.00
SKU: LAS-96974418-EN
Category:

Description

Product Overview

The LINOS 4401-547-000-26 is a green-band telecentric F-Theta field lens from the F-Theta-Ronar series of Excelitas Technologies (Qioptiq, Germany). Design wavelength 532 nm, effective focal length 104.7 mm (100 mm nominal), fused silica lens body, scan field 46 x 46 mm, focused spot diameter about 10 μm with a 10.0 mm input beam, and total transmittance over the working band > 96%. It is a core scanning objective for laser marking, welding and precision micromachining systems.

Key Features

  • Telecentric optical design: the chief ray strikes the workpiece perpendicularly across the whole field, so hole sidewalls show no taper and edge quality matches the centre – ideal for deep engraving, precision cutting and drilling.
  • Optimized for the green band: design wavelength 532 nm, total transmittance over the working band > 96%.
  • High damage threshold coating: coating LIDT 20 J/cm², withstanding high power over long operating hours.
  • Fused silica lens body: low thermal expansion and low absorption suppress thermal lensing; the low absorption coating further reduces coating heating.
  • Suitable for ultrashort pulses: group delay dispersion (GDD) of only 4951 fs², so picosecond and femtosecond laser processing suffers no pulse broadening.
  • Replaceable protective window as standard: protective window PG 4401-496-005-01 blocks dust and spatter, protects the internal lenses and keeps maintenance cost low.

Technical Specifications

Parameter Specification
Model 4401-547-000-26
Type LINOS F-Theta-Ronar telecentric F-Theta field lens (low absorption)
Brand LINOS / Excelitas Technologies (Qioptiq, Germany)
Design Wavelength 532 nm
Effective Focal Length (EFL) 104.7 mm
Back Focal Length (BFL) 141.4 mm
Working Distance (WD) 138.5 mm
Flange Focal Length (FFL) 219.5 mm
Max. Input Beam Diameter (1/e²) 10.0 mm
Recommended Galvo Spacing m1 13.0 mm
Recommended Galvo Spacing m2 28.0 mm
Recommended Galvo Spacing m2 (mechanical) 24.1 mm
Scan Angle ±θ 13.1°
Scan Field 46 x 46 mm
Focused Spot Diameter 10 μm
Max. Telecentric Error 1.7°
Total Transmittance (Working Band) > 96%
Group Delay Dispersion (GDD) 4951 fs²
Coating LIDT 20 J/cm²
Back-Reflection Focal Positions (from first surface) 3.1; 59.6 mm
Weight 1650 g
Protective Window Model 4401-496-005-01

Applications

  • Laser marking and engraving: a 46 x 46 mm field with an approximately 10 μm spot gives crisp edges on metal, plastic and coated surfaces, with high fidelity for small characters and 2D codes.
  • Precision laser welding: effective focal length 104.7 mm (100 mm nominal) with moderate depth of focus; with a galvo scanner it welds battery housings and precision hardware with consistent seams.
  • Cutting and drilling: the telecentric layout leaves almost no taper on deep hole sidewalls and keeps cut edges vertical in thick material.
  • Micromachining and research: with GDD of 4951 fs², ultrafast micromachining pulses are not broadened and spot energy stays concentrated.

Installation and selection notes: field lens performance depends on correct installation. First enter the recommended galvo spacings m1 = 13.0 mm and m2 = 28.0 mm into the scan head software, then set the distance from the field lens reference plane to the workpiece according to the flange focal length FFL of 219.5 mm, and finally fine-tune the Z axis for the smallest spot before production. Keep the protective window PG 4401-496-005-01 in place and check it regularly for contamination, since contamination directly degrades the spot energy distribution. For other field sizes, scale the selection to other focal lengths in the same series (this model, f = 100 mm, covers a 46 x 46 mm field).

FAQ

Which laser source suits the 4401-547-000-26?

It is designed for a 532 nm wavelength (see the specification table for the working band) and suits nanosecond, picosecond and femtosecond industrial lasers in that band. The coating damage threshold is 20 J/cm²; please confirm against your pulse width and power when selecting.

What scan field and spot size does the 4401-547-000-26 offer?

With a 10.0 mm input beam the scan field is 46 x 46 mm (scan angle ± 13.1°) and the focused spot diameter is about 10 μm. A larger entrance pupil or a different focal length in the series gives a different field and spot combination.

What are the advantages of a telecentric field lens over a standard F-Theta lens?

A telecentric design keeps the chief ray approximately perpendicular to the workpiece across the whole field (maximum telecentric error 1.7° for this model), so drilling deep holes or cutting thick material produces no sidewall taper and the focus does not drift with position – ideal for precision work that demands perpendicularity.

Reviews

There are no reviews yet.

Be the first to review “LINOS 4401-547-000-26 Telecentric F-Theta Lens, 532 nm, f=100 mm, 46 x 46 mm”

Your email address will not be published. Required fields are marked *

中文EN