QQ: 859818709

Raycus RFL-P30QB 30 W Q-Switched Pulsed Fiber Laser, 1064 nm, Built-in Red Pointer

Raycus RFL-P30QB 30 W Q-Switched Pulsed Fiber Laser, 1064 nm, Built-in Red Pointer

Price on request
SKU: LAS-63368648-EN
Category:

Description

Product Overview

Raycus RFL-P30QB is a 30 W Q-switched pulsed fiber laser independently developed and mass-produced by Wuhan Raycus Fiber Laser Technologies Co., Ltd. It belongs to the Raycus P-series Q-switched pulsed product line and uses acousto-optic Q-switching (Q-Switched) technology to produce pulsed laser output, with the core advantages of high peak power, high single-pulse energy and excellent beam quality. This model has a built-in red pointer system (QB suffix) that shows the laser processing path in real time, greatly improving positioning accuracy and operating convenience, which makes it particularly suitable for applications with high demands on processing accuracy. The laser can be widely used for marking, deep engraving and micromachining of stainless steel, carbon steel, alloys and other metal materials, as well as surface treatment of some non-metallic materials, and is the core light source of industrial laser marking machines and precision processing systems. Its all-fiber structure ensures high reliability and maintenance-free operation over the long term; compared with conventional lamp-pumped or diode-pumped solid-state lasers, it offers significantly higher electro-optical conversion efficiency, a smaller footprint and a longer service life.

Key Features

  1. High peak power pulse output: acousto-optic Q-switching releases high energy density within a nanosecond pulse width. Peak power reaches the kilowatt level and single-pulse energy is 1 mJ at 30 W average power, so deep engraving and high-quality marking of metal materials are easy, with sharp marking lines and high contrast.
  2. Excellent beam quality: beam quality factor M² < 1.6, close to the diffraction limit, ensures a small, energy-dense focal spot for fine marking and micron-level processing, with character clarity far beyond ordinary light sources.
  3. Highly stable laser output: output power instability < 3%, with minimal power fluctuation during long continuous operation, guaranteeing consistency and repeatability in batch processing – suitable for 7×24 uninterrupted production.
  4. Built-in red pointer system: an integrated 635 nm red pointer shows the processing path and focal position in real time, so operators can locate the processing area quickly without extra calibration, greatly shortening setup time, reducing scrap and raising productivity.
  5. Built-in optical isolator against back reflection: a standard optical isolator effectively prevents reflected light from returning into the laser and damaging components when processing highly reflective materials (gold, silver, copper, aluminum), ensuring safe and stable operation of the laser in such applications.
  6. All-fiber maintenance-free design: a monolithic all-fiber structure with no optical lenses to adjust or clean. All internal optical elements are precision packaged by fused taper technology, eliminating routine maintenance and lowering the cost of ownership; mean time between failures exceeds 100,000 hours.
  7. Intelligent cooling and compact structure: an efficient air-cooling design with multiple fans at the rear keeps the laser stable at ambient temperatures of 0-40 ℃. The module measures only 215×290×95 mm, compact enough to be embedded directly in all kinds of laser processing equipment.
  8. Standardized interface and convenient control: an industrial standard DB25 control interface with external TTL signal control, a power adjustment range of 0-100% and 24 VDC supply, compatible with mainstream marking control cards on the market (such as JCZ, SamLight), plug and play for easy system integration.

Technical Specifications

Optical Characteristics
Average output power ≥30 W
Central wavelength 1064±5 nm
Repetition rate range 30-60 kHz
Output power instability <3%
Output Characteristics
Output beam diameter 5.7-8 mm
Beam quality M² <1.6
Pulse width 120-150 ns
Max. single-pulse energy 1 mJ
Polarization Random
Output fiber length 3 (customizable) m
Red pointer Built-in 635 nm red beam
Optical isolator Standard
Electrical Characteristics
Input power supply 24 VDC
Power adjustment range 0-100%
Power consumption ≤240 W
Other Characteristics
Cooling method Air cooling
Dimensions (W×H×D) 215×290×95 mm
Operating temperature 0-40 ℃
Storage temperature -20 to 60 ℃
Storage humidity ≤80%

Operating Principle

RFL-P30QB uses acousto-optic Q-switching (Acousto-Optic Q-Switched) technology to generate pulsed laser output. Its operating principle is as follows: in an ytterbium-doped (Yb³⁺) fiber, pump light is absorbed by the dopant ions to create a population inversion. While the acousto-optic Q-switch is in the “closed” state, the loss in the resonator increases and laser oscillation is suppressed, so energy keeps accumulating in the gain fiber. When the Q-switch is opened rapidly, the resonator loss drops abruptly and the accumulated energy is released within a very short time as a nanosecond pulse, producing high-peak-power Q-switched output. The pulse width is typically in the 120-150 ns range, determined jointly by the resonator parameters and the Q-switch modulation rate. This is a mature and reliable technology with stable pulse parameters, and it is the most widely used pulsed laser route in industrial marking.

Applications

  • Laser marking: high-contrast marking of stainless steel, carbon steel, alloy steel and other metals; the marks are clear and permanent and meet industrial traceability requirements
  • Deep engraving: high peak power enables deep engraving of metals, suitable for mould numbering and nameplate engraving
  • Electronic component marking: the fine spot meets the high-precision marking needs of electronic components, PCB boards, connectors and other small parts
  • Micromachining and cutting: precision work such as micro-hole drilling and scribing of thin metal sheets
  • ITO film etching / resistor trimming: precise control of pulse energy enables fine etching of thin films and resistor trimming

Selection Guide

As a 30 W class Q-switched pulsed laser, RFL-P30QB is the “golden power range” for metal marking applications, striking an ideal balance between marking speed and processing depth. P30Q is the basic version for general marking tasks; P30QS is the standard version with a more compact housing for easier equipment integration; P30QB has a built-in red pointer for applications with high positioning accuracy requirements. For higher throughput or deeper engraving, consider the 50 W / 60 W models; for black or colour marking on anodized aluminum surfaces, choose the MOPA series (MX models).

Model Comparison (Q-Switched Series)

Parameter P20QE P20QS P20QB P30Q P30QS P30QB P50QB P60QB P70Q P100QA
Power (W) 20 20 20 30 30 30 50 60 70 100
Frequency (kHz) 30-60 30-60 30-60 30-60 30-60 30-60 50-100 55-100 20-400 20-200
Pulse width (ns) 120-150 120-150 110-140 110-130 120-150 120-150 120-150 120-150 50-110 50-110
M² <1.5 <1.6 <1.5 <1.5 <1.6 <1.6 <1.6 <1.6 <1.6 <1.6
Single pulse (mJ) 0.67 0.66 0.66 1 0.75 1 1 1.09 1 1
Red pointer None None Built-in None None Built-in Built-in Built-in None None
Power consumption (W) 170 180 170 240 240 240 340 400 400 450
Reference price Quote on request Quote on request Quote on request Quote on request Quote on request Quote on request Quote on request Quote on request Quote on request Quote on request

About the Brand

Wuhan Raycus Fiber Laser Technologies Co., Ltd. (Raycus) is a leading company in China’s fiber laser industry and the first domestic high-tech enterprise to independently develop and mass-produce fiber lasers. Founded in 2007 and listed on the Shenzhen Stock Exchange in 2018 (stock code 300747), the company is headquartered in Optics Valley, Wuhan. Raycus has mastered the full industry chain of core components, from pump sources and gain fibers to fiber gratings. Its pulsed fiber laser product line covers the 10 W-250 W Q-switched series and the 20 W-250 W MOPA series, widely used in marking, cutting, welding, cleaning and other industrial processing fields. Its domestic market share ranks among the highest, and products are exported to more than 50 countries and regions worldwide.

Contact Us

For more product information, a quotation or technical consulting, please contact Soar Laser:

  • Sales hotline: +86 159-2722-0467
  • Official website: www.soar-laser.cn
  • Brand website: www.raycuslaser.com

We provide professional selection guidance, on-site technical support and comprehensive after-sales service to match you with the best laser solution.

Reviews

There are no reviews yet.

Be the first to review “Raycus RFL-P30QB 30 W Q-Switched Pulsed Fiber Laser, 1064 nm, Built-in Red Pointer”

Your email address will not be published. Required fields are marked *

中文EN