Description
Product Overview
The RayTools robotic laser welding kit is a subsystem rather than a single head: a laser welding head, the motion control, the welding software and a wire feeder are supplied as one package that bolts onto a standard robot interface. The point of buying them together is that head, wire feed and control are tuned against each other before delivery, so filler-wire welding of medium and thick sections starts from a working parameter set instead of from a blank page. The robot arm itself is not part of the kit; it stays with the integrator or the end user, which is how most cells are actually procured.
This is the welding counterpart of our robotic fiber laser cutting kit, and the two must not be confused. The cutting kit carries a cutting head and cutting gas and removes a kerf from the sheet; this kit carries a welding head, a wire feeder and welding process software and deposits filler wire into a joint, so the optics, the gas, the motion strategy and the safety enclosure are all different. A shop that already runs the cutting kit will recognise the integration logic, the standard robot interface and the commissioning service, but nothing else about the process transfers.
Because the kit is a solution rather than a catalogue item, the technical data below lists only what is fixed: the composition and the application. Power, aperture, focal length, wire diameter and the software option set are configured per application, against the joint, the material and the robot. We would rather say that plainly than publish a headline power figure that would be wrong for most projects.
Key Features
- One integrated package: welding head, motion control, welding software and wire feeder, specified together and delivered together
- Fast cell build: a standard robot interface lets the subsystem be mounted on a mainstream arm and brought into production quickly
- Tuned as a system: head, wire feed and control are matched before delivery, so the parameter set that arrives with the kit is a starting point rather than a guess
- Filler-wire capability: wire feed widens the tolerance to joint gap, which is what makes laser welding usable on real fabrications rather than only on machined fits
- Commissioning and support included: installation, commissioning and process support are part of the delivery, not an extra to negotiate later
- Scalable head choice: the kit accepts RayTools welding heads across the range, so the same integration can be reused when the power requirement grows
Technical Specifications
| Brand | Empower / RayTools |
| Model | Robotic laser welding kit |
| Type | Robotic laser welding subsystem |
| Composition | Welding head, motion control, software, wire feeder |
| Application | Robotic laser filler-wire welding workstation |
| Configuration | Head model, power class, focal length, wire diameter and software options are configured per application |
| Robot Arm | Not included; supplied by the integrator or end user |
Power class, clear aperture, focal length, wire diameter, positioning accuracy and cycle time are not fixed by the kit. They follow from the joint design, the material, the required penetration and the robot that carries the head, and are confirmed on the application drawing before the order is released.
Applications
The kit is built for production welding cells: robotic laser welding workstations that run one family of parts at a fixed takt, welding of automotive components and sub-assemblies where distortion has to be held down, and batch welding of metal structures where the joint gap varies enough that filler wire is needed to bridge it. It also suits integrators who build cells for several end users, because the standard interface and the pre-tuned package shorten every project after the first.
Typical joints are fillet and butt welds in medium and thick sheet, lap joints where a gap has to be filled, and seams that would be marginal without wire. The kit is not the right answer for cutting, marking, cleaning or drilling; those need different optics and different gas, and the sister cutting kit covers the cutting case. Tell us the part, the joint, the material, the required penetration and the robot model, and we will return a configuration with the head, the wire feeder, the software options and a commissioning plan.
Selection Guide
- Define the joint before the hardware: the wire diameter, the head standoff and the travel speed all follow from the joint design and the gap tolerance. A kit specified from the part drawing is a working cell; a kit specified from a power figure is a prototype.
- Choose the head for the duty, not for the catalogue: the package accepts RayTools welding heads across the range, so the decision is which head suits the penetration and the seam width, and whether a fixed or a programmable pattern is needed. Bring us the weld requirement and we will name the head.
- Confirm the robot interface early: the kit mounts on a standard robot interface, but the payload, the reach at the working attitude and the cable routing have to be checked against the arm that will carry it. The arm is not part of the kit and is usually the longest lead item in the project.
- Decide the software scope in writing: welding software in this package covers the process, the wire feed synchronisation and the logging. Seam tracking, offline programming and MES connectivity are separate conversations, and they are cheaper to settle at quotation than after commissioning.
- Plan commissioning access: installation and commissioning are included, and the schedule assumes the cell, the laser source, the extraction and the guarding are ready when the engineer arrives. Site readiness is the usual cause of a slipped start-up.
- Budget the consumables as running cost: protective windows, contact tips, feed rolls and wire are consumed in proportion to production, not to calendar time. A spare window and a spare set of feed rolls on site keeps a small stoppage from becoming a lost shift.
Usage Precautions
- Never look into the beam or into specular reflections while the laser is running. Mark the working area with warning signs, fit protective screens and have everyone wear goggles rated for the wavelength in use.
- Use purified or deionised water in the cooling circuit and change it on schedule. If temperature or flow alarms, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
- The robot moves the head, so the working envelope has to be fenced and interlocked before the first automatic cycle. Manual teaching inside the envelope is done with the laser disabled and the key in the teacher’s hand.
- Check the wire feed path, the contact tip and the wire straightness before each shift. A kinked wire or a worn tip changes the deposition rate silently, and the seam that results is under-filled rather than obviously defective.
- Verify the shielding gas flow at the nozzle with the head in the working attitude, not in a service position. A gas line that is fine on the bench can be pinched once the arm is dressed and moving.
- Keep the head’s protective window clean and inspect it at every shift change; on a robotic cell the window is the only part of the optics that sees spatter, and it is also the cheapest part to replace.
- On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
Does the kit include the robot?
No. The robot arm is supplied by the integrator or the end user; the kit is the welding subsystem that mounts on a standard robot interface.
Can it carry a high-power head such as the BW12K?
Yes. The kit is designed to integrate RayTools welding heads across the range, and the configuration is set according to the power class and the process. Send us the head and the joint and we will confirm the package.
How long does deployment take?
With a standard interface, a typical project completes the interface and commissioning work within days once the cell, the laser source and the guarding are on site. Site readiness, not the kit, is usually what sets the date.
Is this the same as the robotic fiber laser cutting kit?
No. The cutting kit carries a cutting head and cutting gas and cuts a kerf; this kit carries a welding head, a wire feeder and welding software and deposits filler wire into a joint. The integration logic is similar, the process hardware is not interchangeable.
Are power and weight published?
They are not fixed for the kit, because they depend on the head and the configuration chosen for the application. The head’s own power class, aperture and weight are quoted with the configuration.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.









Reviews
There are no reviews yet.