QQ: 859818709

Thorlabs PF03-03-F01 Ø7.0 mm UV-Enhanced Aluminum Mirror, 250-450 nm

Thorlabs PF03-03-F01 Ø7.0 mm UV-Enhanced Aluminum Mirror, 250-450 nm

Price on request
Category:

Description

Product Overview

The Thorlabs PF03-03-F01 is a Ø7.0 mm plano mirror with a UV-enhanced aluminum coating on a fused silica substrate, specified for 250 to 450 nm at an average reflectance above 90%. It is the ultraviolet member of the PF03-03 series: the same 7 mm substrate, the same figure, the same mounting, with a coating chosen for the short-wavelength end of the spectrum rather than for the infrared.

Aluminum reflects well across the visible and into the infrared, which is why it is the default metal for broadband mirrors. Left alone, however, the film grows a native oxide that absorbs in the ultraviolet, and that absorption is what limits a plain aluminum mirror below roughly 400 nm. The UV-enhanced process deposits the aluminum under conditions that keep the oxide layer thin and adds a dielectric overcoat, which recovers reflectance across the 250 to 450 nm band. The result behaves like aluminum in the visible and still works in the ultraviolet, which is the combination that makes it useful for a beam path that carries more than one harmonic.

The substrate is fused silica. This is a front surface mirror, so the substrate is not there for transmission, but its polish sets the figure and its homogeneity sets the stability: flatness is λ/10 peak to valley at 633 nm, surface quality is 40-20 scratch-dig and parallelism is held within 3 arcmin. That is figure suitable for a beam that is subsequently focused to a small spot, or for a folded path where several reflections accumulate wavefront error.

At Ø7.0 mm the mirror fits the MK7 mini-series mount and the LMR7 fixed mount, and that is the practical reason for the size: a 7 mm optic in a 7 mm mount keeps an assembly small in a UV imaging or fluorescence path where space is short. The coating is the constraint to respect. The aluminum film is soft and the overcoat is thin, so this is not a cleanable optic. Dust is blown off with clean dry gas; a wipe that would be routine on a protected gold mirror will leave a scratch in this coating.

Key Features

  • UV-enhanced aluminum coating: average reflectance above 90% from 250 to 450 nm, where a plain aluminum film loses reflectance to its native oxide
  • Fused silica substrate: λ/10 peak-to-valley figure at 633 nm with 40-20 scratch-dig surface quality and parallelism within 3 arcmin
  • Metallic coating, tolerant of angle: reflectance varies gently with incidence instead of shifting sharply the way a dielectric stack does, so one part serves 45 degree folding and near-normal incidence
  • Ø7.0 mm x 2.0 mm: fits the MK7 and MK7/M mini-series mount and the LMR7 and LMR7/M fixed mount, keeping a UV path compact
  • Published nanosecond damage threshold: 0.25 J/cm² at 266 nm and 0.3 J/cm² at 355 nm, both measured with 10 ns pulses at 10 Hz
  • Not cleanable: the film is soft and the overcoat thin, so contamination is removed with clean dry gas only

Technical Specifications

Model PF03-03-F01
Coating UV-enhanced aluminum
Wavelength range 250 nm – 450 nm
Average reflectance over 90% from 250 to 450 nm
Substrate Fused silica
Diameter Ø7.0 mm
Diameter tolerance +0.0 mm / -0.1 mm
Thickness 2.0 mm (0.08 in)
Thickness tolerance +/-0.2 mm
Clear aperture over 90% of diameter (over Ø6.3 mm)
Front surface flatness λ/10 peak to valley at 633 nm
Surface quality 40-20 scratch-dig
Parallelism at most 3 arcmin
Pulsed damage threshold 0.25 J/cm² at 266 nm (10 ns, 10 Hz, Ø0.150 mm); 0.3 J/cm² at 355 nm (10 ns, 10 Hz, Ø0.381 mm)
Mount compatibility MK7 / MK7/M mini-series mount, LMR7 / LMR7/M fixed mount
Cleanable No

Source: Thorlabs official product page and family specification table. Values are for the Ø7.0 mm item; other diameters in the same family differ in thickness and clear aperture.

Applications

The coating is chosen for the band, so the applications are those where a beam below 450 nm has to be turned and a dielectric stack is not wanted, either because the wavelength varies or because the cost of a custom coating is not justified.

  • Third and fourth harmonic beam steering, where 355 nm or 266 nm has to be folded out of a solid-state laser path and the optic must survive nanosecond pulses
  • Fluorescence excitation paths, where the excitation beam is routed to a sample and the mirror sits close to the emission collection optics
  • UV imaging and illumination systems, where folding the path compresses the bench and the mirror is small enough to fit inside the enclosure
  • Interferometric and metrology paths at short wavelength, where a λ/10 figure is needed so that the reflection does not add to the wavefront error
  • Multi-wavelength paths that carry a visible beam and a UV harmonic together, where a broadband metal coating serves both and a narrowband dielectric would not

Selection Guide

  • Choose the coating by the band, not by the catalogue position: below 450 nm this UV-enhanced aluminum is the right film; from 450 nm to 2 µm protected aluminum or protected silver gives more reflectance; above 800 nm protected gold is the broadband choice; above 2 µm the mid-infrared enhanced gold is better still
  • Decide whether the optic will be cleaned: if the mirror will be handled and cleaned in a production environment, this is the wrong coating. Protected gold and mid-infrared enhanced gold can be wiped; UV-enhanced aluminum cannot
  • Size the aperture against the beam: keep the beam inside the clear aperture, which is 90% of the diameter on this item. A 7 mm mirror carries a beam of roughly 3 to 4 mm comfortably, and a beam that spills onto the edge produces scatter that looks like a dirty optic
  • Check the power against the damage threshold: the published figures are for 10 ns pulses at 266 and 355 nm. A continuous or long-pulse beam needs a different calculation, and a focused beam needs the energy density at the mirror surface rather than the laser output
  • Confirm the mount before ordering: Ø7.0 mm optics use the MK7 mini-series or the LMR7 fixed mount. A 7 mm optic in a mount designed for 1/2 inch leaves the mirror loose, and clamping it down distorts the figure

Series Comparison

The three Ø7.0 mm mirrors in this group share a substrate, a figure and a mount, and differ only in coating. The choice is therefore a wavelength question first and a handling question second.

Model Coating Wavelength range Average reflectance Cleanable Typical use
PF03-03-F01 – this page UV-enhanced aluminum 250 nm – 450 nm over 90% No UV and blue beam steering, harmonics, fluorescence excitation
PF03-03-M01 Protected gold 800 nm – 20 µm over 96% Yes Broadband infrared folding, CO2 laser delivery, general IR work
PF03-03-M02 Mid-infrared enhanced gold 2 µm – 20 µm over 98% Yes Mid-infrared sensing, thermal imaging, 10.6 µm processes

The wider family is worth knowing because the boundaries are close together. The table below lists the coatings available on the same substrate standard, so a wavelength change can be met by changing the suffix rather than the design.

Coating Wavelength range Average reflectance Cleanable Where it is used
UV-enhanced aluminum 250 nm – 450 nm over 90% No Ultraviolet and blue beam steering where a metal coating is wanted
Protected aluminum 450 nm – 2 µm (over 90%); 2 – 20 µm (over 95%) over 90% / over 95% Yes General broadband folding at low cost, visible to mid-infrared
Protected silver 450 nm – 2 µm (over 97.5%); 2 – 20 µm (over 96%) over 97.5% / over 96% Yes Highest visible and near-infrared reflectance, broadband
Protected gold 800 nm – 20 µm over 96% Yes General infrared folding, CO2 laser beam delivery
MIR-enhanced gold 2 µm – 20 µm over 98% Yes Mid-infrared sensing, thermal imaging, 10.6 µm work
Unprotected gold 800 nm – 20 µm over 97% No Highest gold reflectance where the optic is never touched

Usage Precautions

  • Handling: wear finger cots or powder-free gloves and hold the mirror by its rim only. A fingerprint on a coated face is not cosmetic; the oils absorb at short wavelength and the resulting damage grows under illumination
  • Cleaning: this coating is not cleanable. Blow off loose contamination with clean dry nitrogen or filtered air, and do not drag a tissue across the surface. If the coating is contaminated beyond what a gas blow removes, the optic is replaced rather than cleaned
  • Storage: keep the mirror in its case in a dry, dust-free environment. Aluminum is the most humidity-sensitive of the metal coatings, and a film that has grown oxide in storage will not meet its reflectance specification when it is installed
  • Mounting: a retaining ring tightened until the optic is just held is enough. Over-clamping a 2 mm thick substrate bends it, and a bent mirror no longer has the λ/10 figure it was bought for, which shows up as astigmatism in the reflected beam
  • Optical power: keep the beam inside the clear aperture and compare the energy density at the mirror with the published threshold for the actual pulse length. Scatter from the coating edge and from surface contamination is what usually starts damage, not the nominal beam
  • Back reflection: tilt the mirror slightly off normal where the layout allows, so that the reflection does not return into the laser. A UV beam returned into the source is a risk to the laser and a source of instability

FAQ

How does UV-enhanced aluminum differ from protected aluminum? Both are aluminum films with a dielectric overcoat, but they are optimised for different bands. UV-enhanced aluminum keeps the native oxide thin so that reflectance holds from 250 to 450 nm; protected aluminum is specified from 450 nm to 2 µm above 90% and from 2 to 20 µm above 95%, and its ultraviolet reflectance is lower. For work below 450 nm choose the UV-enhanced coating; for visible and infrared broadband work the protected coating is the better and cheaper choice.

Can the PF03-03-F01 be cleaned? No. The aluminum film is soft and the overcoat is thin, so solvent and tissue cleaning that is routine on a protected gold mirror will damage this coating. Remove dust with clean dry gas and replace the optic if contamination cannot be blown off.

Which mount takes a Ø7.0 mm mirror? The MK7 and MK7/M mini-series mount and the LMR7 and LMR7/M fixed mount. Both are sized for a 7 mm optic with a 2 mm substrate, so the mirror sits in the mount without being clamped against a step that does not match its thickness.

Why does the specification say 2.0 mm thick when other mirrors in the family are 6.0 mm? Thickness in this family scales with diameter. The Ø7.0 mm items are 2.0 mm thick; the 1/2 inch and larger items are 6.0 mm and the 2 inch item is 12.0 mm. The 7 mm optic is thin because it is designed for a compact mount, and its figure is specified at λ/10 on that 2 mm substrate.

What is the difference between the F01, M01 and M02 mirrors? The band and the durability. F01 is UV-enhanced aluminum for 250 to 450 nm and cannot be cleaned. M01 is protected gold for 800 nm to 20 µm with a cleanable overcoat. M02 is mid-infrared enhanced gold for 2 to 20 µm, with the highest reflectance of the three and a cleanable overcoat qualified to MIL-C-48497A.

Disclaimer

Specifications on this page are compiled from Thorlabs official published material and are provided as a selection reference. The current official specification sheet governs; specifications and appearance may change without notice. Price and lead time are quoted by our sales team on request. Reproduction of this page without written permission is not permitted.

About the Brand

Thorlabs is a manufacturer of photonics and optical components. The metal-coated plano mirrors in the PF03-03 series are produced at the company’s coating facility in Newton, New Jersey, and the range covers UV-enhanced aluminum, protected aluminum, protected silver, protected gold, mid-infrared enhanced gold and unprotected gold on the same substrate and the same mounting standard. That common platform is the practical value of the series: a design can change coating to follow a wavelength change without changing the mount, the clear aperture or the optical axis. Figure, surface quality, parallelism and laser damage threshold are published per coating and per diameter rather than as one figure for the family, which is why the tables on this page are specific to the Ø7.0 mm item.

Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159 2722 0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “Thorlabs PF03-03-F01 Ø7.0 mm UV-Enhanced Aluminum Mirror, 250-450 nm”

Your email address will not be published. Required fields are marked *

中文EN