QQ: 859818709

Thorlabs PF03-03-M01 Ø7.0 mm Protected Gold Mirror, 800 nm – 20 µm

Thorlabs PF03-03-M01 Ø7.0 mm Protected Gold Mirror, 800 nm – 20 µm

Price on request
Category:

Description

Product Overview

The Thorlabs PF03-03-M01 is a Ø7.0 mm plano mirror carrying protected gold on a fused silica substrate, specified for 800 nm to 20 µm at an average reflectance above 96%. It is the broadband infrared member of the PF03-03 series, and the word that matters in its name is protected.

Gold is close to an ideal infrared reflector: it has no oxide problem, its reflectance holds from the near infrared to the far infrared, and it is insensitive to angle. What it lacks is mechanical durability. A bare gold film is soft, adheres poorly to a substrate and cannot be touched, which in practice means it can only be used where nothing will ever go near the coated face. The protected version puts a dielectric overcoat over the gold. That overcoat is what turns the coating into an optic that can be installed, inspected and cleaned in a working laboratory, and it is the reason this mirror is the general-purpose infrared folding mirror of the series.

The overcoat is not free. It costs a small amount of reflectance, and it introduces a wavelength dependence that a bare gold film does not have. For most folding applications neither effect is visible; for a design that is running at the edge of a link budget, the unprotected gold coating in the same family gives about one percentage point more and takes the handling restriction in exchange.

The substrate is fused silica, 2.0 mm thick, with flatness of λ/10 peak to valley at 633 nm, 40-20 scratch-dig surface quality and parallelism within 3 arcmin. Because the coating is metallic, the reflectance is largely independent of incidence angle, so the same mirror works as a 45 degree folding mirror and at near-normal incidence without a polarisation penalty. At Ø7.0 mm it fits the MK7 mini-series mount and the LMR7 fixed mount.

Key Features

  • Protected gold coating: average reflectance above 96% from 800 nm to 20 µm, with a dielectric overcoat that makes the film durable and cleanable
  • Broadband and angle-tolerant: one coating covers the near infrared, the mid infrared and the 10.6 µm CO2 line, and reflectance holds as the angle of incidence changes
  • Fused silica substrate: λ/10 peak-to-valley figure at 633 nm, 40-20 scratch-dig surface quality, parallelism within 3 arcmin
  • Ø7.0 mm x 2.0 mm: fits the MK7 and MK7/M mini-series mount and the LMR7 and LMR7/M fixed mount
  • Published damage thresholds: 2 J/cm² for 10 ns pulses at 1.064 µm, and 500 W/cm at 1.070 µm or 750 W/cm at 10.6 µm for continuous power
  • Cleanable: the overcoat tolerates solvent and tissue cleaning, which is what separates this coating from unprotected gold

Technical Specifications

Model PF03-03-M01
Coating Protected gold
Wavelength range 800 nm – 20 µm
Average reflectance over 96% from 800 nm to 20 µm
Substrate Fused silica
Diameter Ø7.0 mm
Diameter tolerance +0.0 mm / -0.1 mm
Thickness 2.0 mm (0.08 in)
Thickness tolerance +/-0.2 mm
Clear aperture over 90% of diameter (over Ø6.3 mm)
Front surface flatness λ/10 peak to valley at 633 nm
Surface quality 40-20 scratch-dig
Parallelism at most 3 arcmin
Pulsed damage threshold 2 J/cm² at 1.064 µm (10 ns, 10 Hz, Ø1.000 mm)
CW damage threshold 500 W/cm at 1.070 µm; 750 W/cm at 10.6 µm
Mount compatibility MK7 / MK7/M mini-series mount, LMR7 / LMR7/M fixed mount
Cleanable Yes

Source: Thorlabs official product page and family specification table. Values are for the Ø7.0 mm item; other diameters in the same family differ in thickness and clear aperture.

Applications

The combination of broadband reflectance and a cleanable surface is what makes this the default infrared folding mirror. It is used wherever an infrared beam has to be redirected and the optic will be handled by people rather than kept sealed in a fixed assembly.

  • CO2 laser beam delivery at 10.6 µm, where the beam is folded between the source and the work head and the mirror has to survive both the power density and routine maintenance
  • Infrared imaging and thermal measurement paths, where a broadband reflector is needed and the coating must not introduce the spectral structure of a dielectric stack
  • FTIR and infrared spectroscopy benches, where several reflections accumulate and a cleanable surface is worth more than the last percentage point of reflectance
  • Optical parametric sources and infrared beam conditioning, where the wavelength is tunable across the near and mid infrared and one coating has to cover the whole tuning range
  • General laboratory folding of 800 nm to 20 µm beams, including the turning mirrors that steer a beam into a multi-pass cell

Selection Guide

  • Choose the band first: from 800 nm to 20 µm this protected gold is the broadband answer. Above 2 µm the mid-infrared enhanced gold gives about two percentage points more reflectance; below 800 nm gold is not the right metal at all
  • Then decide on handling: if the optic will be cleaned, this is the coating. Unprotected gold is about one percentage point higher in reflectance and cannot be touched, which is a poor trade in any application where the mirror is installed by hand
  • Check continuous power against the CW figure: the threshold is quoted in W per cm of beam diameter, not in W per cm², so a 5 mm beam at 100 W is 200 W/cm and not 510 W/cm². Use the linear figure the specification is written in
  • Size the aperture against the beam: keep the beam inside the clear aperture, which is 90% of the diameter. A 7 mm mirror comfortably carries a 3 to 4 mm beam; a beam that touches the edge scatters and heats the mount
  • Confirm the mount: Ø7.0 mm optics use the MK7 mini-series or the LMR7 fixed mount, both sized for a 2 mm substrate

Series Comparison

The three Ø7.0 mm mirrors in this group share a substrate, a figure and a mount, and differ in coating. This page is the broadband infrared option, and it is the one to choose when the wavelength is not confined to a narrow band.

Model Coating Wavelength range Average reflectance Cleanable Typical use
PF03-03-F01 UV-enhanced aluminum 250 nm – 450 nm over 90% No UV and blue beam steering, harmonics, fluorescence excitation
PF03-03-M01 – this page Protected gold 800 nm – 20 µm over 96% Yes Broadband infrared folding, CO2 laser delivery, general IR work
PF03-03-M02 Mid-infrared enhanced gold 2 µm – 20 µm over 98% Yes Mid-infrared sensing, thermal imaging, 10.6 µm processes

The wider family shows where the boundaries fall. The same substrate standard carries six coatings, so a wavelength change is met by changing the suffix rather than the mechanical design.

Coating Wavelength range Average reflectance Cleanable Where it is used
UV-enhanced aluminum 250 nm – 450 nm over 90% No Ultraviolet and blue beam steering where a metal coating is wanted
Protected aluminum 450 nm – 2 µm (over 90%); 2 – 20 µm (over 95%) over 90% / over 95% Yes General broadband folding at low cost, visible to mid-infrared
Protected silver 450 nm – 2 µm (over 97.5%); 2 – 20 µm (over 96%) over 97.5% / over 96% Yes Highest visible and near-infrared reflectance, broadband
Protected gold 800 nm – 20 µm over 96% Yes General infrared folding, CO2 laser beam delivery
MIR-enhanced gold 2 µm – 20 µm over 98% Yes Mid-infrared sensing, thermal imaging, 10.6 µm work
Unprotected gold 800 nm – 20 µm over 97% No Highest gold reflectance where the optic is never touched

Usage Precautions

  • Handling: wear finger cots or powder-free gloves and hold the mirror by its rim. The overcoat protects the gold from abrasion, not from the salts and oils in a fingerprint, and a contaminated face needs cleaning before it is used at power
  • Cleaning: this coating can be cleaned. Blow off loose dust first, then drag a lens tissue moistened with solvent across the surface in one direction, and finish with a dry drag. Do not rub in circles and do not use the same tissue twice
  • Storage: keep the mirror in its case in a dry environment. The overcoat is a dielectric layer and a humid atmosphere is what attacks it at the pinholes, so a desiccator is worth the shelf space for optics that are stored for months
  • Mounting: a retaining ring tightened until the optic is just held is enough. A 2 mm substrate bends under clamping force, and the λ/10 figure is lost before the mirror is even aligned
  • Optical power: compare the linear power density of the beam with the CW figure for the wavelength in use, and the energy density with the pulsed figure for the actual pulse length. Damage usually starts at a coating defect or a dust particle rather than in the middle of a clean aperture
  • Back reflection: where the layout allows, tilt the mirror slightly off normal so the reflection does not return into the source. At 10.6 µm a returned beam is both a hazard and a cause of instability in the laser

FAQ

How do I choose between protected gold and unprotected gold? Protected gold has a dielectric overcoat and can be cleaned; unprotected gold has roughly one percentage point more reflectance and cannot be touched, wiped or handled near the coated face. Choose the protected coating unless the optic is sealed in an assembly that will never be opened and the extra reflectance is worth something in the link budget.

Can the PF03-03-M01 be cleaned? Yes. The overcoat is there precisely so that the mirror can be maintained. Blow off loose contamination, then use a solvent-moistened lens tissue in a single direction and finish dry. Abrasive or repeated circular wiping will eventually polish through the overcoat.

Which mount takes a Ø7.0 mm mirror? The MK7 and MK7/M mini-series mount and the LMR7 and LMR7/M fixed mount, both sized for a 7 mm optic with a 2 mm substrate.

Does gold work in the visible? Poorly. Gold reflects well from about 800 nm upward and its reflectance falls away through the visible, which is why the visible range in this family is covered by protected silver or protected aluminum. The 800 nm figure at the short end of the specification is the practical boundary.

What is the difference between the M01 and the M02? Both are gold with a protective overcoat and both can be cleaned. M01 covers 800 nm to 20 µm at above 96% average reflectance and is the broadband general-purpose choice. M02 is optimised for 2 to 20 µm at above 98% and performs worse than M01 below 2 µm, so the choice follows the working wavelength rather than the headline reflectance.

Disclaimer

Specifications on this page are compiled from Thorlabs official published material and are provided as a selection reference. The current official specification sheet governs; specifications and appearance may change without notice. Price and lead time are quoted by our sales team on request. Reproduction of this page without written permission is not permitted.

About the Brand

Thorlabs is a manufacturer of photonics and optical components. The metal-coated plano mirrors in the PF03-03 series are produced at the company’s coating facility in Newton, New Jersey, and the range covers UV-enhanced aluminum, protected aluminum, protected silver, protected gold, mid-infrared enhanced gold and unprotected gold on the same substrate and the same mounting standard. That common platform is the practical value of the series: a design can change coating to follow a wavelength change without changing the mount, the clear aperture or the optical axis. Figure, surface quality, parallelism and laser damage threshold are published per coating and per diameter rather than as one figure for the family, which is why the tables on this page are specific to the Ø7.0 mm item.

Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159 2722 0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “Thorlabs PF03-03-M01 Ø7.0 mm Protected Gold Mirror, 800 nm – 20 µm”

Your email address will not be published. Required fields are marked *

中文EN