Description
Product Overview
This is the 10-piece pack of the PF05-03-M01; the optic is identical to the single-unit version. Ten Ø12.7 mm protected gold mirrors on 6.0 mm fused silica, each coated to the same specification: average reflectance above 96% from 800 nm to 20 µm, λ/10 peak to valley at 633 nm, 40-20 scratch-dig, clear aperture above 90% of the diameter, and the part number laser engraved on the back of every piece.
The pack exists for procurement, not for optics. A beam-delivery periscope, an eight-pass amplifier, a delay line or a multi-mirror steering head consumes six to twelve half-inch mirrors in one build, and buying them as singles turns that build into ten order lines, ten shipping events and ten chances that one piece arrives from a different batch with a different shelf history. One part number, one line, one delivery: the assembly is finished in one session instead of waiting for a second shipment.
Be precise about what the pack does and does not guarantee. It guarantees that all ten pieces carry the same part number and are inspected to the same published specification. It does not publish a statement that all ten came from a single coating run, and no supplier can promise that for a stocked optic. If an assembly needs a reflectance-matched set, an interferometer with several folds or a multi-pass cell where the loss accumulates, order one pack rather than assembling ten singles from different orders, because pieces from one pack at least share a shipping batch. If the requirement is tighter than the published band, tell us before ordering and we will raise it with the factory.
Each mirror is engraved on the back with its part number, which matters more in a pack than in a single purchase: ten identical gold discs in one box cannot be told apart by eye, and once two of them are mounted the engraving is the only way to know which is which. The pack also changes how a laboratory stocks the part. A tool crib holding one pack can replace a coating damaged by a misaligned beam without raising a new purchase order, which is usually the difference between a line stopping for a week and a line stopping for an hour.
Buy the single unit instead if the requirement is a prototype, a spare for an existing bench, or a first sample of the coating to evaluate. Ten mirrors is a lot of inventory for an experiment that needs one, and the single-unit PF05-03-M01 is the same optic in a quantity of one.
Key Features
- Ten mirrors, one part number: the PF05-03-M01 optic, supplied as a pack for builds that consume several mirrors at once
- One order line and one delivery: a multi-mirror assembly can be built in a single session instead of accumulating shipments
- Uniform inspection: every piece is held to the same published figures, over 96% average reflectance from 800 nm to 20 µm, λ/10 at 633 nm and 40-20 scratch-dig
- Part number engraved on the back of each mirror, so unboxed pieces stay identifiable on a crowded bench
- Interchangeable with the single unit: 12.7 mm diameter, 6.0 mm ± 0.2 mm thickness, +0.0 / -0.1 mm diameter tolerance
- Spares on the shelf: a damaged coating in a production fixture is replaced from the pack rather than ordered again
- Same laser ratings as the single unit: 2 J/cm² at 1.064 µm for 10 ns pulses at 10 Hz, 500 W/cm CW at 1.070 µm and 750 W/cm CW at 10.6 µm
Technical Specifications
| Parameter | Value |
|---|---|
| Model | PF05-03-M01-10 |
| Pack size | 10 pieces |
| Optic | Identical to PF05-03-M01 |
| Coating | Protected gold, dielectric overcoat |
| Wavelength range | 800 nm – 20 µm |
| Average reflectance | over 96% from 800 nm to 20 µm |
| Substrate | Fused silica |
| Diameter | 12.7 mm (Ø1/2 inch) |
| Diameter tolerance | +0.0 mm / -0.1 mm |
| Thickness | 6.0 mm (0.24 inch) |
| Thickness tolerance | ±0.2 mm |
| Front surface flatness | λ/10 peak to valley at 633 nm |
| Surface quality | 40-20 scratch-dig |
| Parallelism | 3 arcmin or better |
| Clear aperture | above 90% of the diameter |
| Damage threshold, pulsed | 2 J/cm² at 1.064 µm, 10 ns, 10 Hz, Ø1.000 mm |
| Damage threshold, CW | 500 W/cm at 1.070 µm, Ø0.089 mm; 750 W/cm at 10.6 µm, Ø0.339 mm |
| Marking | Part number laser engraved on the back of each mirror |
| Source | Thorlabs official series specification table |
Applications
The pack is bought by the people who build the same thing more than once. Typical cases:
- Production fixtures: a laser marking or welding head with four to six fold mirrors, all replaced on the same maintenance interval, so the spares have to be identical
- Teaching laboratories: eight or ten identical benches, each needing a 45° fold, all built from one order and one delivery
- Multi-pass amplifiers and delay lines: six to twelve mirrors in one cavity, where a mixed batch would mean a mixed loss figure that cannot be predicted
- Maintenance stock: coating damage from a misaligned beam is the most common failure of a fold mirror, and a pack removes the purchasing delay from the repair
- Pilot and pre-production builds: ten pieces covers a small OEM run before a volume agreement is in place
Selection Guide
Two decisions are being made on this page: how many mirrors, and which coating. The table answers the first; the paragraph after it answers the second.
| Option | Part number | Quantity | When to choose it |
|---|---|---|---|
| Single unit | PF05-03-M01 | 1 | Prototype, first sample, or replacement of one damaged mirror |
| 10-pack (this page) | PF05-03-M01-10 | 10 | Build consuming several, tool-crib spares, teaching bench |
| Ø7.0 mm round | PF03-03-M01 | 1 | Small aperture, 2.0 mm thick substrate, miniature mounts |
| 10-pack, Ø1 inch | PF10-03-M01-10 | 10 | Same coating in a larger aperture for a multi-mirror build |
On coating: this is protected gold, the only gold that is specified from 800 nm, so it is the right film whenever the path carries anything between 800 nm and 2 µm alongside the thermal infrared. If the beam is entirely beyond 2 µm, the PF05-03-M02-10 pack gives 98% instead of 96% in that band. If the mirrors will never be touched, the unprotected PF05-03-M03 adds another point of reflectance and asks for handling discipline in return. For visible work the protected aluminum 10-pack is the equivalent pack in a 450 nm to 20 µm coating.
FAQ
Are all ten mirrors in this pack the same optic as the single-unit PF05-03-M01? Yes. Coating, substrate, thickness, figure, finish and laser ratings are identical; the difference is the quantity and the part number on the label.
Can I order six mirrors instead of ten? The pack is a fixed ten-piece unit under one part number. If you need six, order six singles of the PF05-03-M01; if the requirement is several packs or a repeating schedule, tell us the annual quantity and we will quote a project supply.
Do the ten mirrors come from one coating run? Thorlabs does not publish that guarantee for a stocked multipack, and we will not invent one. What the pack does give you is ten pieces of one part number, inspected to one specification, shipped together and stored together.
How do I tell the mirrors apart once they are out of the box? By the part number engraved on the back face. The engraving sits outside the coated surface and does not affect the clear aperture.
Is a 10-pack available in the other diameters? Yes. Thorlabs offers the same protected gold coating as PF10-03-M01-10 in Ø1 inch and PF20-03-M01-10 in Ø2 inch. The Ø7.0 mm size is sold as a single unit only.
Disclaimer
Specifications here are copied from the Thorlabs published tables for the PF05-03-M01 family and are intended to help a buyer choose between quantities and coatings. The official datasheet in force at the time of purchase governs; specifications, marking and packaging may change without notice. Quantity quotations and lead time come from our sales team, since both depend on current stock.
Contact Us
Changsha Soar Laser Equipment Co., Ltd. supplies genuine Thorlabs optics to laboratories and machine builders in China. A pack is a quantity decision, so tell us how many mirrors one build consumes and how often that build repeats; we will confirm whether a single pack covers it or whether a project quantity is the better route. Hotline +86 159 2722 0467, email 859818709@qq.com, website www.soar-laser.cn. If the mirrors are going into a fixture that already holds a different coating, quote the existing part number and we will check the two are compatible before the order ships.









Reviews
There are no reviews yet.