QQ: 859818709

RayTools XC3000T-EtherCAT Dual-Drive Mid-to-Low Power Flat-Sheet Laser Cutting CNC System

RayTools XC3000T-EtherCAT Dual-Drive Mid-to-Low Power Flat-Sheet Laser Cutting CNC System

Price on request
Category:

Description

Product Overview

The XC3000T is a flat-sheet laser cutting CNC system from RayTools, built on the xStudio platform. It targets mid-to-low power applications and accepts both pulse and bus drive modes on the same controller, so it works with mainstream sources such as IPG, SPI and Raycus. The function set is complete and commissioning is straightforward, which makes it the economical control solution for small and medium flat-bed cutting equipment.

Key Features

  • Dual-drive compatibility: pulse and bus drives can be mixed on one system
  • Mid-to-low power: economical configuration
  • Source compatibility: IPG, SPI, Raycus and other mainstream lasers
  • Simple commissioning: a short path to production
  • xStudio platform: a unified function set inside a complete ecosystem

Technical Specifications

Brand Empower / RayTools
Model XC3000T
Type Flat-sheet laser cutting CNC system
Bus EtherCAT / pulse + direction
Applicable power Mid-to-low power
Platform xStudio

Applications

Small and medium flat-sheet laser cutting machines, sheet-metal blanking, teaching rigs and light-industry processing. Comparable duties in the same working range are also covered; non-standard configurations and batch projects can be discussed, and drawings or process requirements are welcome for a detailed assessment.

Selection Guide

  • Fix the servo architecture first – EtherCAT bus or pulse – together with the laser brand, then match the system version to them, so the interfaces do not have to be reworked later.
  • A bus version gives simpler wiring, faster refresh and better expansion; when retrofitting an older machine, confirm the existing electrical interfaces first and fall back to the pulse version or a mixed-support model where needed.
  • Models in the family differ in power class, drive architecture, I/O and function modules, so confirm the combination against the machine design; sample trials and solution assessments can be arranged for batch purchases or line integration.
  • The unit is genuine factory stock and ships with a packing list and warranty certificate; warranty and spare-part support run from receipt as agreed, wear items excluded.
  • This model is the XC3000T EtherCAT flat-sheet cutting CNC system and the key figures are in the table above; for a higher power class, a different drive architecture or a different I/O configuration, ask us for the family comparison and a quotation.

Usage Precautions

  • Never look into the beam or into specular reflections while the laser is running; mark the work area, fit guarding and wear goggles rated for the wavelength in use.
  • Fill the cooling circuit with purified or deionised water and change it on schedule; if a temperature or flow alarm appears, stop the machine and find the cause before restarting.
  • Wiring and servicing are for a licensed electrician only, with lockout and tagout applied; the equipment must be solidly earthed against leakage and electrical interference.
  • Protect the unit from moisture and dust in transit and in store; before a long idle period, drain the water circuit, disconnect power and cover the machine.
  • Size the cabinet cooling for the system and the drives as specified, fit duct filters in dusty shops, and back up the system parameters regularly.
  • On receipt, check the model nameplate against the accessory list; for installation or commissioning problems, contact Changsha Soar Laser technical support on +86 159-2722-0467 for remote or on-site help.

FAQ

How does the XC3000T differ from the XC3000S?
The T is the general-purpose flat-sheet configuration; the S is the enhanced version with no-sense piercing, obstacle avoidance and vibration suppression. Choose by the process requirement.

Can an older machine be retrofitted?
Yes. Pulse servo drives can be connected directly, which makes the system suitable for upgrading older machines.

Which file formats are supported?
G-code, DXF, PLT and other common machining files.

Disclaimer

Disclaimer: the parameters on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest specification sheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.

Contact us: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools XC3000T-EtherCAT Dual-Drive Mid-to-Low Power Flat-Sheet Laser Cutting CNC System”

Your email address will not be published. Required fields are marked *

中文EN