QQ: 859818709

RayTools XC4000T Standard Two-Chuck Tube Laser Cutting System

RayTools XC4000T Standard Two-Chuck Tube Laser Cutting System

Price on request
Category:

Description

Product Overview

The XC4000T is the professional tube laser cutting system in the RayTools range, built on the xStudio platform. A standard two-chuck arrangement clamps the tube at both ends, which keeps long stock steady and holds kerf consistency, and both EtherCAT bus and pulse servo drives are supported. It pairs with cutting heads from BS04K CAT-3D up to BS100K CAT Plus-3D, and the EtherCAT closed loop is what delivers the precision the professional tube machines are specified for.

Key Features

  • Standard two chucks: stable clamping and reliable support at both ends
  • Closed-loop control: commissioned against the CAT series cutting heads
  • Wide head coverage: BS04K to BS100K CAT Plus-3D
  • Dual drive: EtherCAT bus plus pulse servo
  • Professional tube cutting: complete function set

Technical Specifications

Brand Empower / RayTools
Model XC4000T
Type Standard two-chuck tube laser cutting system
Bus EtherCAT / pulse + direction
Chucks Standard two-chuck
Cutting head BS04K CAT-3D to BS100K CAT Plus-3D
Platform xStudio

Applications

Professional tube laser cutting machines, profile processing and metal-products production. Comparable duties are covered by the same controller; non-standard builds and batch projects can be discussed, and part drawings or process requirements are welcome for a detailed assessment.

Selection Guide

  • Settle the servo architecture, EtherCAT bus or pulse, and the laser source brand before choosing the version, so the interfaces line up at the first attempt.
  • Choose cutting head and control version as a pair: the CAT-3D range runs from BS04K to BS100K CAT Plus-3D, and the closed-loop behaviour depends on that pairing.
  • For long tube and heavy wall work, confirm chuck capacity and support length with us; irregular profiles and bevelling are quoted against the part drawing.
  • Genuine factory stock, shipped with a packing list and warranty certificate; warranty and spare parts run from receipt as agreed, excluding consumable wear parts.
  • This model is the XC4000T, with key specifications in the table above; for another head pairing, power class or interface, contact us for a comparison and a quotation.

Usage Precautions

  • Never view the beam or a specular reflection directly during cutting; guard the work zone, display warning notices and use goggles correct for the wavelength.
  • Use purified or deionised water in the cooling circuit and change it on the recommended interval; on a flow or temperature alarm, halt the process and rectify before restarting.
  • Only a licensed electrician may wire or service the machine, working under lockout and tagout; reliable earthing is required to avoid leakage and interference.
  • Protect the electrical cabinet from damp and dust during transport and storage; drain the water circuit and isolate power before a long shutdown.
  • Size cabinet ventilation for the controller and drives as the installation standard requires, filter the air intake in dusty environments, and keep a current backup of parameters.
  • Verify the nameplate and accessory list on arrival; Changsha Soar Laser technical support is reachable on +86 159-2722-0467 for remote or on-site help during commissioning.

FAQ

What is the advantage of two chucks?
Clamping the tube at both ends keeps long stock from swinging, so the kerf stays consistent along the whole length of the part.

What is CAT-3D?
The RayTools intelligent cutting-head series with closed-loop control and 3D follow-up, integrated with the XC4000T rather than bolted on.

Can it cut irregular profiles?
Yes, with the appropriate software and chuck configuration; send the section drawing and we will confirm the arrangement.

Disclaimer

The figures here are drawn from the manufacturer’s public material and our existing files and serve as a selection reference. Where a value matters for your order, the physical unit, the factory test report and the latest manufacturer data sheet govern; batch-to-batch changes in appearance or configuration are possible, so check with us before purchase. No part of this page may be reproduced without written consent.

Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools XC4000T Standard Two-Chuck Tube Laser Cutting System”

Your email address will not be published. Required fields are marked *

中文EN