Description
Product Overview
The XC6000 EtherCAT is the bus edition of the RayTools high-power flat-sheet cutting CNC system, built on the xStudio platform. It runs the machine over EtherCAT with full closed-loop control, and it keeps the entire high-power process set of the XC6000: intelligent piercing detection, the 9+1 piercing process, process monitoring with intelligent re-cut, common-edge overcut, sharp-corner lead-in and traceless micro-joint. In other words, the process know-how that a cutting shop has built up on the standard XC6000 is not thrown away when the machine moves to a bus architecture.
The difference is in the servo side. On the bus edition the drives are commanded and their positions read back over EtherCAT, so the control loop closes on actual axis position rather than on a pulse count, wiring between the cabinet and the machine is reduced to a few cables, and additional axes can be added without another bundle of conductors. That matters at ten-kilowatt class and above, where the machine is large, the gantry is heavy and the piercing routine has to hold position while a thick plate is opened up. The system is specified with BS20K CAT and above cutting heads, which is the combination used for thick-plate blanking in heavy industry.
Key Features
- EtherCAT full closed-loop control: drives are commanded and read back over the bus, so the loop closes on real axis position
- Complete high-power process set: intelligent piercing detection, the 9+1 piercing process, process monitoring with intelligent re-cut, common-edge overcut, sharp-corner lead-in and traceless micro-joint
- 9+1 piercing routine: written for thick plate, where a single-stage pierce either spatters or fails to open the hole
- Process monitoring with intelligent re-cut: if a pierce or a contour does not go through, the system re-cuts instead of scrapping the part
- Fewer cables, faster refresh: a bus architecture cuts the wiring between cabinet and machine and improves the control response
- Specified with BS20K CAT and above: matched to the cutting heads used on ten-kilowatt class flat-sheet machines
- xStudio platform: the same software environment as the rest of the RayTools control range
Technical Specifications
| Brand | Empower / RayTools |
| Model | XC6000 EtherCAT |
| Type | High-power flat-sheet laser cutting CNC system, EtherCAT bus edition |
| Bus | EtherCAT |
| Power Class | High power, ten-kilowatt class |
| Cutting Head | BS20K CAT and above |
| Platform | xStudio |
| Key Functions | Intelligent piercing detection / 9+1 piercing process / process monitoring with intelligent re-cut / common-edge overcut / sharp-corner lead-in / traceless micro-joint |
Applications
The bus edition is used on ten-kilowatt class flat-sheet cutting machines, where the sheet is large, the plate is thick and the machine runs production shifts rather than job work. Typical applications are thick-plate blanking for heavy machinery, structural and transport equipment; cutting of thick mild steel, stainless and aluminium plate where the pierce is the limiting step; and shops that run a mixed order book on one machine and need the process set to cover the whole range without changing the control.
It also suits machine builders who want one control platform across a range: the bus architecture scales to additional axes and to larger gantries without re-engineering the electrical design, and the process functions are the same ones already proven on the standard XC6000. For a retrofit, the existing electrical interface decides whether the bus edition or the pulse version is the practical choice; for a new machine, the bus edition is normally the default at this power class. Send us the machine layout, the laser source and the cutting head and we will confirm the configuration and the axis count.
Selection Guide
- Settle the servo architecture first: EtherCAT bus or pulse plus direction. The bus edition closes the loop on actual position and simplifies wiring; the pulse version is the practical answer for an older machine whose drives and wiring are already in place. Deciding this before the laser brand avoids a system that does not talk to the drives.
- Match the cutting head to the system: this configuration is specified with BS20K CAT and above. A smaller head on a ten-kilowatt machine is not a saving, it is a bottleneck, and the process set cannot compensate for optics that were not built for the power.
- Check the laser brand and interface: the control has to speak the laser’s protocol and handle its safety interlock chain. Give us the laser model with the enquiry so the interface and the interlock wiring are quoted, not discovered.
- For a retrofit, survey before you commit: confirm the existing drive types, the encoder feedback and the cabinet space. A machine that already has bus-capable drives converts cleanly; one with older analogue drives may be better served by the pulse version or by a hybrid arrangement.
- Plan the parameter backup: the process set, the piercing routines and the machine parameters are the value in this system. Back them up on a schedule and keep a copy off the machine, because a control that has to be rebuilt from memory is a week of production lost.
- Do not confuse it with the standard XC6000: the process functions are the same, the servo architecture is not. Order the bus edition where the machine is new and the drives are bus-capable, and the standard version where the existing electrical design is pulse based.
Usage Precautions
- Never look into the beam or into specular reflections while the laser is running. Mark the working area with warning signs, fit protective screens and have everyone wear goggles rated for the wavelength in use.
- Use purified or deionised water in the cooling circuit and change it on schedule. If temperature or flow alarms, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lock-out and tag-out after isolation. The equipment must be reliably earthed to prevent leakage and interference.
- Protect the equipment from moisture and dust in transport and storage; before long shutdowns drain the water circuit, disconnect power and cover the unit against dust.
- Configure the cooling of the control cabinet and the drives to the specification, and fit duct filters in a dusty shop. A control cabinet that runs hot produces intermittent faults that are diagnosed as software problems and cost days to find.
- Back up the machine parameters, the process set and the piercing routines on a schedule, and keep a copy off the machine. This is the single most valuable maintenance action on a CNC system.
- Check the EtherCAT cabling and the connector seating after any mechanical work on the machine. A bus fault usually appears as a drive that drops out under acceleration, which looks like a tuning problem and is not.
- Verify the pierce and the re-cut behaviour on a scrap plate after any change of material supplier or gas. The process set is written for a plate condition, and a change of condition is where an apparently stable machine starts to scrap parts.
- On receipt, check the model nameplate against the accessory packing list. For help with installation and commissioning, contact Soar Laser technical support in Changsha (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
How does this differ from the pulse version of the XC6000?
The process functions are the same; the difference is the servo architecture. This is the EtherCAT bus edition, which closes the control loop on actual axis position and reduces the wiring between cabinet and machine. The standard version drives the axes with pulse and direction signals.
What should be done when thick-plate piercing is unstable?
Enable the 9+1 piercing process together with process monitoring, so the routine adapts to the plate condition instead of running a fixed pierce. The piercing parameters should also be reviewed whenever the plate supplier or the gas changes.
Does it support intelligent re-cut?
Yes. Process monitoring works with intelligent re-cut: if a pierce or a contour does not go through, the system compensates and re-cuts rather than completing a part that will be scrapped downstream.
Which cutting head is required?
The configuration is specified with BS20K CAT and above. Using a lower-rated head on a ten-kilowatt machine limits the process rather than saving money.
Is it suitable for retrofitting an existing machine?
It can be, if the existing drives are bus-capable. Survey the drive types, the encoder feedback and the cabinet space first; where the machine is pulse based, the standard XC6000 is usually the simpler route.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documents and are for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change with production batches, so please confirm with us before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection advice: Soar Laser Equipment Co., Ltd., Changsha – hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.









Reviews
There are no reviews yet.