QQ: 859818709

RayTools XC6000 High-Power Flat-Sheet Laser Cutting CNC System

RayTools XC6000 High-Power Flat-Sheet Laser Cutting CNC System

Price on request
Category:

Description

Product Overview

The XC6000, also designated X6, is the high-power flat-sheet cutting CNC system in the RayTools range, built on the xStudio platform. Intelligent piercing detection keeps the process stable, the 9+1 piercing process set is written for thick plate on ten-kilowatt machines, and process monitoring with automatic re-cut prevents an incomplete cut from passing through. Common-line overcut, corner lead-in, mark-free micro-jointing, pierce dross removal and vibration suppression are all included. The system pairs with BS20K CAT and higher cutting heads and supports both EtherCAT bus and pulse servo drives.

Key Features

  • Intelligent piercing: piercing detection for a stable start
  • 9+1 piercing set: thick plate on ten-kilowatt machines
  • Process monitoring: automatic re-cut against incomplete cuts
  • Rich process functions: common-line overcut, corner lead-in, mark-free micro-jointing
  • High-power pairing: BS20K CAT and above

Technical Specifications

Brand Empower / RayTools
Model XC6000
Type Flat-sheet high-power laser cutting CNC system
Bus EtherCAT / pulse + direction
Key functions Intelligent piercing / 9+1 process / process monitoring
Power class High power (ten-kilowatt class)
Cutting head BS20K CAT and above
Platform xStudio

Applications

Ten-kilowatt flat-bed laser cutting machines, thick-plate blanking and heavy-industry fabrication. Similar duties are handled by the same controller, and non-standard builds or batch projects can be reviewed against your drawings and process requirements.

Selection Guide

  • Match the controller to the source first: ten-kilowatt and higher flat-bed machines need a version whose piercing and monitoring functions are specified for thick plate.
  • Confirm the cutting-head pairing, BS20K CAT or above, because the closed loop and the process functions are commissioned against that head.
  • Bus and pulse drives are both supported; a new build normally takes the bus version, while a retrofit should start from the electrical interface already on the machine.
  • Genuine factory stock, shipped with packing list and warranty certificate; warranty and spare parts run from receipt as agreed, consumable wear parts excluded.
  • This model is the XC6000 and the table above lists its key specifications; for a different power class, head pairing or interface, ask for a family comparison and quotation.

Usage Precautions

  • Direct viewing of the beam or of specular reflections is prohibited while cutting; enclose the work area, mark it with warning signs and wear wavelength-matched goggles.
  • Charge the chiller with purified or deionised water, renew it on schedule, and stop the machine to investigate any temperature or flow alarm before restarting.
  • Electrical work is restricted to a licensed electrician under lockout and tagout, and the machine frame must be reliably earthed to prevent leakage and interference.
  • Shield the cabinet from moisture and dust in transit and in storage; isolate power and cover the machine before extended downtime.
  • Provide cabinet airflow for the controller and drives to the installation standard, fit intake filtration in dusty plants, and archive parameters after every change.
  • On delivery, compare the nameplate and accessory list; commissioning questions can be directed to Changsha Soar Laser on +86 159-2722-0467 for remote or on-site support.

FAQ

What is the 9+1 piercing process?
Nine piercing strategies plus one combined mode, called up according to plate thickness and piercing conditions, which is what makes thick-plate piercing repeatable.

How does it differ from the XC3000Plus?
The XC6000 is aimed at ten-kilowatt high power and thick-plate process work; the XC3000Plus covers general mid-to-high power flat cutting.

What if thick plate is not cut through?
Enable process monitoring with automatic re-cut: the system compensates and repeats the cut instead of passing a scrap part down the line.

Disclaimer

Parameters listed above come from the manufacturer’s public documentation and our own records and are for selection guidance only. The actual unit, the factory inspection report and the manufacturer’s newest specification sheet prevail; appearance and configuration may be revised between batches, so confirm with us before ordering. Reproduction without written permission is prohibited.

Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “RayTools XC6000 High-Power Flat-Sheet Laser Cutting CNC System”

Your email address will not be published. Required fields are marked *

中文EN