🎯 Depth of Focus (Depth of Field) DOF Calculator
Online Depth of Focus (Depth of Field) DOF Calculator
After a laser is focused, depth of focus is the axial distance over which the beam maintains an approximately minimum spot near the focus. Enter the wavelength and f-number (or numerical aperture N.A.) to instantly calculate the diffraction-limited total depth of focus, the one-sided depth of focus and the reference focal spot diameter, for evaluating cutting/welding thickness and judging focal tolerance.
🎯 Depth of Focus Calculator
Choose an input mode, enter the wavelength and f-number / numerical aperture, and the total depth of focus, one-sided depth of focus, equivalent parameters and focal spot diameter are calculated automatically
μm
Laser wavelength, in micrometres (μm)
F/
Effective focal length of the focusing lens ÷ entrance pupil diameter
💡 Quick reference for common wavelengths: 1064 nm fibre =1.064μm| 532 nm green =0.532μm| 355 nm UV =0.355μm | CO₂ = 10.6μm
Note: the above is the theoretical depth of focus for a uniform aperture at the diffraction limit; the Rayleigh range of a Gaussian beam, zR= πw₀²/λ, is defined differently; see the formula details below.
Formula details
Definition of the diffraction-limited depth of focus, its two forms of expression and its difference from the Rayleigh range of a Gaussian beam
Parameter details
Meaning and values of the three core parameters: wavelength, f-number / N.A. and depth of focus
Wavelength λ
lambda
Common unit: μm (micrometre)
- Fibre laser 1064 nm = 1.064 μm
- Green light 532 nm = 0.532 μm
- UV 355 nm = 0.355 μm
- CO₂ laser 10.6 μm
- Depth of focus and wavelengthdirectly proportional: doubling the wavelength doubles the depth of focus
F-number / numerical aperture
F/# · N.A.
Dimensionless
- F/# = focal length f ÷ entrance pupil diameter D
- Common f-theta field lenses: F/2 ~ F/8
- Smaller f-number → smaller spot and higher power density
- Depth of focus and (F/#)²directly proportional, and with NA² it isinversely proportional
- Doubling the f-number: spot diameter ×2, depth of focus ×4
Depth of focus DOF
Depth of Focus
Common unit: μm; convert to mm for larger values
- Total depth of focus = 2λ(F/#)² (combined on both sides of the focus)
- One-sided depth of focus = λ(F/#)² (≈ focal positioning tolerance)
- 1064 nm + F/2.8: total depth of focus ≈ 16.7 μm
- CO₂ 10.6 μm + F/5: total depth of focus ≈ 530 μm
- is adiffraction-limited theoretical value, but in practice it is also affected by aberration and beam quality M²
📋 Quick-reference table of total depth of focus (wavelength × f-number)
The table gives the total depth of focus DOF = 2·λ·(F/#)² in μm; the one-sided depth of focus is half of the tabulated value
| Wavelength λ | F/2 | F/2.8 | F/4 | F/5.6 | F/8 |
|---|---|---|---|---|---|
| 0.355μm(355 nm UV) | 2.84 | 5.57 | 11.36 | 22.27 | 45.44 |
| 0.532μm(532 nm green) | 4.26 | 8.34 | 17.02 | 33.37 | 68.10 |
| 1.064μm(1064 nm fibre) | 8.51 | 16.68 | 34.05 | 66.73 | 136.19 |
| 10.6μm(CO₂) | 84.80 | 166.21 | 339.20 | 664.83 | 1356.80(≈1.357mm) |
Table example: a 1064 nm fibre laser with an F/2.8 field lens gives a total depth of focus of 16.68 μm and about 8.34 μm on one side; switching to an F/8 field lens at the same wavelength increases the total depth of focus to 136.19 μm, but the focal spot diameter also grows from about 7.27 μm to about 20.77 μm.
⚠️ Common pitfalls and notes
Six most common pitfalls when using the depth-of-focus formula for process decisions
Is diffraction depth of focus the same as the Gaussian beam Rayleigh range?
No. The Rayleigh range zR= πw₀²/λ is based on the 1/e² intensity beam-waist radius, while the depth-of-focus formula is based on the Airy disc blur of a uniform aperture; the two have different definitions and criteria, and their values differ by a factor on the order of π/4, so they cannot be interchanged directly. For Gaussian beam analysis, please use the Gaussian Beam Calculator.
If the f-number doubles, does the depth of focus also double?
Wrong — it isquadrupled. Depth of focus is proportional to (F/#)²: changing from F/2.8 to F/5.6 (2×) increases the depth of focus by about ×4, while the spot diameter only goes ×2. The squared relationship is the most commonly overlooked term in depth-of-focus estimation.
Does wavelength have little effect on depth of focus?
Depth of focus and wavelengthdirectly proportional. At the same F/5 focusing, the depth of focus of a 10.6 μm CO₂ laser (530 μm) is fully 10 times that of a 1.064 μm fibre laser (53.2 μm). This is why CO₂ lasers naturally have an advantage in depth of focus for thick-plate processing.
Should the NA form be written λ/(2·NA)?
The denominator isNA²not NA: DOF = λ/(2·NA²), one-sided = λ/(4·NA²). Raising NA from 0.1 to 0.2 does not halve the depth of focus but reduces it to 1/4. The inverse-square relationship in the NA form is very easy to write incorrectly.
Is a larger depth of focus always better?
Not necessarily. Depth of focus is obtained by increasing the f-number (reducing NA), but the focal spot d ≈ 2.44λF grows at the same time and the power density falls. Precision cutting/micromachining of thin sheet needs a small spot and high power density, so a shallow depth of focus plus precision follow-focus is preferred; depth of focus is prioritised only for thick-plate processing.
Can the sheet thickness be equal to one depth of focus?
They cannot be equated directly. Depth of focus is only the ‘approximately minimum spot’opticalrange; in practice, kerf/weld formation is also affected by heat conduction, material absorptivity, assist gas, cutting speed and defocus strategy (positive/negative defocus). Depth of focus is a necessary reference, not an upper limit on the processable thickness.


