Description
Product Overview
The 2-axis mirror mount is the basic mount that carries full-reflection and partial-reflection mirrors in a laser beam path. It accepts Ø20 mm optics and uses two pitch and tilt adjustment screws to finely set the reflection angle, for laser cavity mirror alignment or external beam path folding. The anodized aluminum body and the locking screws hold the setting without drift over long periods, making it a standard item for laser assembly and beam path service work.
Key Features
- Fits Ø20 mm optics: covers the aperture most commonly used in laser cavities
- Two-axis precision adjustment: fine pitch and tilt adjustment with locking to prevent drift
- In-cavity and out-of-cavity use: suits both laser cavity mirrors and external beam path reflectors
- Anodized aluminum body: stable, durable and rust-free
- Standard hole pattern: base holes match common optical base plates
Technical Specifications
| Type | 2-axis optical mirror mount |
| Compatible Optics | Ø20 mm full-reflection / partial-reflection mirrors |
| Adjustment Axes | Two axes (pitch and tilt) |
| Body Material | Anodized aluminum alloy |
| Application Areas | Laser cavity alignment, external beam path folding |
Applications
Laser cavity mirror assembly, CO2 and solid-state laser beam path construction, and maintenance spares. It also suits comparable processing requirements; custom and batch solutions are available on request – send drawings or process requirements for a detailed evaluation.
Selection Guide
- The mounting surface must be clean and flat. Loosen the locking screw before fine adjustment and lock it afterwards; never force the screws, since this can induce stress damage in the optic.
- Confirm the angle of incidence and orientation of mirrors and beamsplitters against the beam path drawing. The spot should fall completely inside the clear aperture to avoid edge clipping.
- Models in the same series differ in power handling, clear aperture, interfaces and functional modules. For batch purchasing or production line integration, sample evaluation and solution review are available on request.
- This is genuine factory stock, shipped with a packing list and warranty certificate. Warranty and spare part support are provided from the date of receipt as agreed; consumables such as optics and seals are excluded.
- This model is a 2-axis optical mirror mount for Ø20 mm laser cavity mirrors (full-reflection or partial-reflection types); key specifications are listed in the table below. For higher power, larger aperture or different interface versions, contact our service team for a series comparison and quotation.
Usage Precautions
- Never look into the beam or specular reflections while the laser is running. Mark and shield the work area and wear protective eyewear matched to the wavelength.
- Use purified or deionized water in the water cooling system and replace it regularly. If temperature or flow alarms occur, stop the machine and investigate before restarting.
- Electrical wiring and servicing must be carried out by a licensed electrician with lockout/tagout, and the equipment must be reliably grounded to prevent electric shock and interference.
- Protect the equipment from moisture and dust during transport and storage. Before a long shutdown, drain the water circuit, disconnect power and cover the unit.
- The adjustment mechanism is a precision component – avoid impact and drops. Clamp the optic with even force and lock it before starting a process.
- On receipt, check the model nameplate against the packed accessory list. For installation or commissioning problems, contact Soar Laser technical support (+86 159-2722-0467) for remote or on-site assistance.
FAQ
Can it hold 25 mm optics?
The default version accepts 20 mm optics. For 25 mm, choose the matching aperture version and state it clearly on the order.
What is the difference between a 2-axis and a 4-axis mount?
A 2-axis mount adjusts pitch and tilt only, giving a simple and low-cost structure. Choose a 4-axis mount when you need azimuth plus pitch fine alignment of the beam.
Will the setting loosen over time?
The adjustment screws have a locking feature and hold their setting once locked. Where machine vibration is high, check the alignment periodically.
Disclaimer
Specifications on this page are compiled from the manufacturer’s public information and available documentation and are provided for selection reference only. Product specifications are subject to the actual product, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change between batches, so please confirm with our service team before ordering. Reproduction of this page’s content without written permission is prohibited.
Selection support: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.







Reviews
There are no reviews yet.