QQ: 859818709

RAYLASE SUPERSCAN IV SOLAR Galvo Scanner, 15-20 mm, Photovoltaic Cell Processing

RAYLASE SUPERSCAN IV SOLAR Galvo Scanner, 15-20 mm, Photovoltaic Cell Processing

Price on request
Category:

Description

Product Overview

The SUPERSCAN IV SOLAR is a high-speed scanning galvanometer developed by RAYLASE specifically for laser processing of solar cells. In PERC solar cell production, lasers are used for laser contact opening (LCO) on the rear side and for selective laser doping, which requires extremely fine structures patterned with micrometre-level accuracy while throughput must exceed 3600 wafers per hour. With ±10 μm accuracy, a marking speed of over 60 m/s and the very high dynamics enabled by lightweight SiC mirrors, the SUPERSCAN IV SOLAR marks 100-300 laser lines in under one second, securing high throughput and low cost of ownership. Two apertures are available, 15 mm and 20 mm, and the SUPERSCAN IV 20 SOLAR covers the 210 × 210 mm² processing field of M12 large-format wafers.

Technical Specifications

Parameter Value
Input aperture 15 mm / 20 mm
Typical deflection angle ±0.393 rad
Processing speed up to 200 rad/s
Positioning speed up to 200 rad/s
Resolution (SL2-100) 20 bit / 0.76 μrad
Resolution (XY2-100) 16 bit / 12 μrad
RMS repeatability below 2.0 μrad
Thermal drift, gain max. 15 ppm/K
Thermal drift, offset max. 10 μrad/K
8 h long-term drift (water cooled) below 40 μrad
Interface SL2-100 / XY2-100 Enhanced
Power supply +48 V, 2 Arms, max. 5 A
Protection rating IP64
Weight (15 mm) approx. 3.2 kg
Weight (20 mm) approx. 5.5 kg

Applications

  • Laser contact opening (LCO) in PERC solar cell processes, selective laser doping and wafer texturing

📞 Hotline: +86 159-2722-0467 | 🌐 Website: www.soar-laser.cn

Reviews

There are no reviews yet.

Be the first to review “RAYLASE SUPERSCAN IV SOLAR Galvo Scanner, 15-20 mm, Photovoltaic Cell Processing”

Your email address will not be published. Required fields are marked *

中文EN