Description
Product Overview
The ZBTK F3.1 is a galvo control platform, and the platform is the point. It is the control system that Shenzhen Zhibotaike Technology (ZBTK) builds for automated welding on a scanning head: the galvo pair moves the beam across the joint, a dual-wobble function spreads the beam along a programmable path, and a stepper-driven wire feed is held in step with that path. The three functions share one timebase, which is what makes a wobble weld with feed behave as a single process instead of three processes that happen to run at the same time.
Wobble welding changes the problem that a joint presents. A narrow beam on a gap that varies produces a seam whose width and penetration follow the gap rather than the drawing. Adding a controlled oscillation widens the melt pool, bridges a fit-up that is not perfect, and lets a lower average energy per unit length do the work, with the oscillation parameters setting the width. The F3.1 controls that oscillation in several patterns – linear, spiral and figure-eight – with frequency and amplitude set independently, so the same control covers a lap joint that needs a wide shallow pool and a butt joint that needs a narrow deep one.
The enhanced F3.1 version adds EtherCAT as its high-speed field bus, which is the difference that matters on a production line: the control, the galvo head and the axis drives exchange data on one deterministic bus instead of through separate connections, so synchronisation is a property of the network rather than something that has to be tuned. A second version in the same family, the PTZJ(V3.29)-485, uses RS485 for installations where compatibility with an existing PLC matters more than bus speed. Both run the same welding functions; the difference is how they talk to the rest of the machine.
The control is a cabinet-mounted unit with its own 24 V DC supply, air cooling and a compact enclosure, so it can sit inside a machine frame rather than in a separate control room. It is a control system, not a complete welding machine: the laser source, the galvo head and the wire feed mechanism are selected for the joint and supplied around it. The table below lists the published electrical, communication and environmental data together with the process parameters the control exposes.
Key Features
- Fast real-time loop: a high-performance DSP executes galvo commands with a response under 0.5 ms, interpolates the dual-wobble path on a 1 ms cycle and holds stepper wire feed synchronisation to 0.1 ms
- Dual-wobble welding control: linear, spiral and figure-eight patterns, with wobble frequency adjustable from 0.1 to 500 Hz and amplitude from 0 to 5 mm, set independently of the travel speed
- Coordinated stepper wire feed: constant-speed and pulse feed modes, feed rate from 0.5 to 25 m/min, with the feed position tied to the beam position rather than to a separate timer
- Multi-axis coordination: galvo X and Y, Z lift, rotary axis, dual wobble and wire feed run in one interpolation, with teach programming and offline program preparation both supported
- Process protection: galvo fault monitoring, laser overload protection, wire jam detection and cooling water flow monitoring are all handled by the control, so a fault stops the process instead of spoiling the part
- Machine-friendly interfaces: EtherCAT and RS485 communication, multiple digital and analogue channels, and parameter import and export by USB stick for cloning a setup across machines
Technical Specifications
| Brand | ZBTK (Shenzhen Zhibotaike Technology) |
| Model | PTZJ(F3.1), enhanced version |
| Product type | Galvo platform welding control system |
| Supply | 24 V DC, 10 A |
| Communication | EtherCAT / RS485 |
| Cooling | Air cooled |
| Operating temperature | 0 to 45 C |
| Dimensions | 340 x 260 x 120 mm |
| Weight | 3.5 kg |
| Galvo command response | under 0.5 ms |
| Wobble interpolation period | 1 ms |
| Wire feed synchronisation accuracy | 0.1 ms |
| Wobble patterns | Linear, spiral, figure-eight |
| Wobble frequency | 0.1 to 500 Hz |
| Wobble amplitude | 0 to 5 mm |
| Wire feed modes | Constant speed and pulse |
| Wire feed rate | 0.5 to 25 m/min |
| Axes coordinated | Galvo X and Y, Z lift, rotary axis, dual wobble, wire feed |
| Programming | Teach programming and offline programming |
| Monitoring | Galvo fault, laser overload, wire jam, cooling water flow |
| Parameter handling | Import and export by USB |
Applications
The control is used where a scanning head welds a joint that moves, or where the joint itself is wider than the beam. Both cases need the beam position and the wire position to be decided in the same clock, which is the function this unit provides.
- Platform galvo welding stations in automated lines, where the part is indexed under the head and the seam is welded by scanning rather than by moving an arm
- Lap and fillet joints on thin sheet, where a wobble pattern widens the pool enough to bridge the fit-up without burning through
- Circular and rectangular seams on small housings, connectors and hardware, welded by galvo scanning with a rotary or XY stage
- Welds that need filler, where the wire feed has to follow the oscillating beam rather than a fixed point
- Retrofits of an existing scanning station where the mechanics are sound and only the control layer is being replaced
Because the control coordinates several axes, the usual project starts from the motion: which axes exist, which of them are driven by the galvo and which by the machine, and what the wire feed has to follow. Answering that fixes the program structure, and the process parameters are then developed on samples of the actual joint.
Series Comparison
Two versions of the same welding control are offered, and the choice is decided by the machine around it rather than by the welding function, which is common to both.
| Model | Version | Communication | Main characteristics |
| PTZJ(F3.1) – this page | Enhanced | EtherCAT | High-speed bus, tighter real-time behaviour, suited to high-cycle automated lines |
| PTZJ(V3.29)-485 | RS485 version | RS485 | Wider compatibility, suited to connection with mainstream PLC systems |
In practice the question is what the rest of the machine already speaks. A line built around EtherCAT servo drives gains from the F3.1 because the welding control joins the same deterministic network as the motion. A line built around a PLC with serial communication is better served by the RS485 version, where the wiring is simple and the existing program structure does not have to change. Neither version is an upgrade of the other; they are two interfaces to the same welding functions.
Usage Precautions
- Supply quality: the unit expects a regulated 24 V DC supply with headroom for inrush. A brown-out during a weld corrupts the galvo position mid-seam, and the result looks like a process fault rather than a supply fault
- EtherCAT wiring: route the bus cable away from drive power cables and observe the vendor’s shielding and grounding rules. Intermittent bus errors appear as a seam that stops for no visible reason
- Enclosure temperature: keep the cabinet within 0 to 45 C. The unit is air cooled, so a sealed cabinet without ventilation will exceed that range in summer even when the ambient shop temperature looks acceptable
- Parameter backup: export the parameter set to a USB stick before any firmware change, and keep the file with the machine record. Parameters are setup data, not part of the firmware image
- Wire feed path: check the liner, the tension and the drive roller before setting the jam threshold. A threshold set to compensate for a worn liner will not detect a real jam
- Optical protection: never run the scanning head without its protective window, and inspect the window on a schedule. Contamination shows as a gradual loss of penetration, which is easy to misread as a parameter drift
- Cooling water monitoring: the control measures flow, it does not chill. The chiller and its alarm chain remain part of the machine, and the flow signal should be wired into the stop circuit rather than only displayed
FAQ
What is the difference between the F3.1 enhanced version and the V3.29-485 version?
The F3.1 uses EtherCAT as its high-speed bus, which gives tighter real-time behaviour and better synchronisation, and suits high-cycle automated lines. The V3.29-485 version uses RS485, which is more widely compatible and easier to connect to a mainstream PLC. The welding functions are the same; the interface is the difference.
How does platform galvo welding differ from robot welding?
A galvo head deflects the beam and reaches the joint by scanning, so it is fast and precise within its working field but does not travel beyond it. A robot moves the head itself, so it reaches large or complex parts but accelerates and decelerates a mass. The two are chosen by part size and by cycle requirement, and they are often combined on the same line.
Does the package include the galvo head and the laser?
No. This is the control system. The galvo head, the fibre laser and the wire feed mechanism are selected for the joint and quoted separately, and the control is configured for the combination you choose.
Can the wire feed be omitted?
Yes. Welding without filler is a standard configuration, and the feed channel is simply not used. The synchronisation functions remain available if a feed axis is added later.
Is teach programming enough, or is offline programming needed?
Both are supported. Teach programming is practical for a repeated seam on a fixed fixture; offline programming is worth the effort when several parts share the station or when the path has to be prepared away from the machine.
Disclaimer
Specifications on this page are compiled from the manufacturer’s published material and from existing documentation, and are provided as a selection reference. The delivered configuration is defined by the physical unit, the factory test report and the current manufacturer specification; the galvo head, laser source and wire feed mechanism are separate items selected for the joint. Firmware behaviour and available parameters may change between versions, so confirm the details with us before ordering. Reproduction of this page without written permission is not permitted.
Selection enquiries: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159 2722 0467, www.soar-laser.cn, email 859818709@qq.com.





Reviews
There are no reviews yet.