📐 Field of View (FOV) Calculator
Lens Field of View (FOV) Calculator
Based on the lens focal length and the camera sensor format size, this tool quickly calculates the horizontal, vertical and diagonal fields of view (HFOV / VFOV / DFOV); entering the working distance also gives the actual field coverage (mm) on the target plane, making it suitable for machine vision, laser inspection imaging and camera lens selection.
📐 Field of View (FOV) Calculator
Enter the sensor format size and lens focal length to calculate the horizontal / vertical / diagonal fields of view automatically; optionally enter the working distance to calculate the actual capture coverage
mm
Effective horizontal dimension of the light-sensitive area
mm
Effective vertical dimension of the light-sensitive area
mm
A shorter focal length gives a wider field of view, a longer one a narrower field
mm
Distance from the front / principal plane of the lens to the target plane; when entered, the actual field coverage is output
Formula details
The field of view is determined jointly by the sensor format size and the lens focal length and is a purely geometric relationship under the pinhole / thin-lens model
VFOV = 2·arctan(H / 2f)
DFOV = 2·arctan( D / 2f )
FoV_H = H·WD/f
f ↓ → FOV ↑ (wide-angle / fisheye)
Parameter details
Focal length, sensor format and working distance — the three core inputs determining the field of view
Lens focal length f
- In mm; common fixed-focal-length industrial lenses are 8 / 12 / 16 / 25 / 35 / 50 mm
- The primary control of the field of view: the smaller f, the wider the field
- The same focal length gives different FOVs on different sensor formats (the equivalent focal length concept)
- Telecentric lenses have a field of view close to 0° and their field coverage does not change with working distance, so this calculator does not apply to them
Sensor format W × H
- Width × height of the effective area of the imaging chip (mm), not the external package dimensions
- Common formats: 1/3″, 1/2″, 2/3″, 1″, 4/3″, APS-C, full frame
- The inch in the format designation is a legacy vidicon tube designation; multiplied by 16 it is only approximately the diagonal in mm
- The larger the sensor format, the wider the field at the same focal length and generally the larger the physical size of a single pixel
Working distance WD
- Distance from the lens to the target plane under test (mm); optional
- Affects only the actual field coverage at the target plane, not the angular FOV
- Under the thin-lens approximation, the field coverage is linearly proportional to WD
- For close-up work or high magnification, a correction based on the principal-plane separation is needed; the results are for reference only
📋 Quick-reference table of field of view for common sensor formats (DFOV)
Diagonal fields of view (°) of 10 common sensors at 5 frequently used focal lengths, exact values from the pinhole model
| Sensor format | Diagonal (mm) | f=8 mm | f=12 mm | f=16 mm | f=25 mm | f=35 mm |
|---|---|---|---|---|---|---|
| 1/4″(3.2×2.4) | 4.00 | 28.07° | 18.92° | 14.25° | 9.15° | 6.54° |
| 1/3″(4.8×3.6) | 6.00 | 41.11° | 28.07° | 21.24° | 13.69° | 9.80° |
| 1/2.5″(5.76×4.29) | 7.18 | 48.35° | 33.32° | 25.30° | 16.35° | 11.72° |
| 1/2″(6.4×4.8) | 8.00 | 53.13° | 36.87° | 28.07° | 18.18° | 13.04° |
| 1/1.8″(7.18×5.32) | 8.94 | 58.37° | 40.84° | 31.21° | 20.27° | 14.55° |
| 2/3″(8.8×6.6) | 11.00 | 69.02° | 49.25° | 37.94° | 24.81° | 17.86° |
| 1″(12.8×9.6) | 16.00 | 90.00° | 67.38° | 53.13° | 35.49° | 25.75° |
| 4/3″(17.3×13.0) | 21.64 | 107.04° | 84.08° | 68.14° | 46.81° | 34.36° |
| APS-C(23.6×15.6) | 28.29 | 121.02° | 99.38° | 82.96° | 59.00° | 44.01° |
| Full frame (36×24) | 43.27 | 139.41° | 121.97° | 107.03° | 81.74° | 63.44° |
Note: APS-C dimensions vary slightly between manufacturers (approx. 23.5~23.7 × 15.6 mm); 23.6 × 15.6 is used in the table. When the DFOV exceeds 100°, a dedicated wide-angle / fisheye lens is usually required, as edge aberration of ordinary prime lenses increases markedly.
⚠️ Common misconceptions and cautions
Common points of confusion in field-of-view calculation and lens selection
Is there only one FOV value?
There are three field-of-view values: horizontal HFOV, vertical VFOV and diagonal DFOV. Lens manuals usually quote only the largest value, the diagonal DFOV, whereas machine-vision setups care whether the workpiece is covered horizontally / vertically; these must be calculated separately and the diagonal alone is not sufficient.
Is the diagonal of a 1/2″ sensor 12.7 mm?
No. The inch in the format designation comes from the legacy designation of the outer diameter of vidicon tubes and has no 1 inch = 25.4 mm conversion relationship with the actual light-sensitive diagonal. A 1/2″ sensor has an actual diagonal of only 8 mm; refer to the width × height in millimetres given in the manufacturer’s datasheet.
A longer focal length gives a wider view?
Exactly the opposite. With the sensor format fixed, a shorter focal length gives a larger field of view (wide-angle, fisheye), while a longer focal length gives a narrower field and magnifies distant objects more. Choose a short focal length to capture everything, and a long one to capture larger, see finer detail.
If the working distance changes, does the field of view change too?
The angular FOV is determined solely by the sensor format and focal length and is independent of WD. What WD changes is the actual image coverage at the target plane, which under the thin-lens approximation is linearly proportional to WD: double the distance and the captured width and height double as well.
Can the field of view be determined from the focal length alone?
No. The FOV is determined jointly by the focal length and the sensor format size. The same 50 mm lens on a full-frame camera gives a DFOV≈46.8° (standard angle of view), while on a 1/2″ camera it gives only about 36.9°, producing a medium telephoto effect.
Are the formulas still exact for close-up work?
The thin-lens / pinhole formulas are very accurate when the object distance is much greater than the focal length; in macro work or at high magnification (where m cannot be neglected), the actual field coverage should be assessed from the lens principal-plane separation and the manufacturer’s working-distance curves, taking into account the change in effective f-number and the rapidly shallowing depth of field.


