🔭 F/# & Numerical Aperture Calculator
F/# & Numerical Aperture Calculator
Calculate the f-number (aperture value) and numerical aperture N.A. of an optical system, understand the conversion between the two ways of describing light-gathering ability, and support laser system design and component selection.
🔭 F/# & N.A. Calculator
Enter the focal length and entrance pupil diameter, or solve for F/# from a known N.A., to calculate all parameters automatically
mm
Effective focal length of the lens or optical system
mm
Effective diameter of the stop or entrance pupil
Air = 1.0, water = 1.333, oil immersion = 1.515
Formula details
The f-number and numerical aperture are two equivalent ways of describing the light-gathering ability of an optical system
Parameter details
The relationship between f-number, N.A. and half-cone angle
F-number F/#
- In photography it is called the aperture value (f/1.4, f/2.8, f/5.6 …)
- Each f-stop changes the f-number by a factor of √2 ≈ 1.414
- Common range for industrial lenses: F/1.2 ~ F/22
- Smaller f-number → greater light throughput → smaller focal spot
Numerical aperture N.A.
- Commonly marked on microscope objectives (0.1, 0.25, 0.95 …)
- N.A. = n·sinθ, with the maximum limited by the refractive index of the medium
- The fastest in air is about N.A. = 0.95 (F/0.53)
- Oil-immersion objectives can reach N.A. = 1.4 (F/0.36)
- N.A. directly determines the diffraction-limited resolution
Half-cone angle θ
- Half of the angle subtended from the focus to the edge of the entrance pupil
- θ = arctan(D/2f)
- At F/1.0, θ ≈ 26.6°
- At F/5.6, θ ≈ 5.1°
- In laser processing it affects the power density distribution at the focus
📋 Common F/# and N.A. conversion table
Exact conversion in air (n = 1.0)
| F/# | N.A. (exact) | N.A. (approximate) | Half-angle θ | Typical application |
|---|---|---|---|---|
| F/1.0 | 0.4472 | 0.5000 | 26.57° | Ultrafast microscope objective |
| F/1.4 | 0.3307 | 0.3571 | 19.29° | Large-aperture photographic lens |
| F/2.0 | 0.2425 | 0.2500 | 14.04° | Fibre coupling lens |
| F/2.8 | 0.1741 | 0.1786 | 10.02° | f-theta field lens |
| F/4.0 | 0.1231 | 0.1250 | 7.07° | General imaging lens |
| F/5.6 | 0.0884 | 0.0893 | 5.08° | Standard photographic aperture |
| F/8.0 | 0.0622 | 0.0625 | 3.56° | High-quality imaging |
| F/11 | 0.0453 | 0.0455 | 2.59° | Depth-of-field priority applications |
| F/16 | 0.0312 | 0.0313 | 1.79° | Maximum depth of field |
⚠️ Common pitfalls and notes
Common points of confusion in F/# and N.A. conversion
Does F/# = 1/(2·N.A.) always hold?
This is only an approximate formula. The exact relationship is F/# = n/(2·sinθ); at small f-numbers (e.g. F/1.2) the error can exceed 10%.
Are N.A. and F/# the same thing?
No, but they are equivalent. N.A. is mostly used in microscopy and fibre optics, while F/# is mostly used in photography and industrial lenses. The two can be converted into each other.
Are the working f-number and the nominal f-number the same?
When a lens is focused at close distance, the effective f-number = (1+m) × nominal f-number. The effect is significant in macro photography, while in laser processing m is usually extremely small and can be neglected.
Is the entrance pupil diameter the same as the lens outer diameter?
Not necessarily. The entrance pupil is the image of the stop as seen from the object side and may be smaller than the lens outer diameter. In multi-element lenses the front group may magnify or reduce the entrance pupil.
Can the refractive index of the medium be ignored?
The N.A. of an oil-immersion objective can exceed 1.0 because n_oil ≈ 1.515. The refractive index of the medium must be entered in the calculation; you cannot simply assume n=1.
Is a smaller f-number always better?
A smaller f-number lets in more light, but aberration is more severe and the depth of field is shallower. Optical design requires a trade-off between light throughput, image quality and depth of field.


