Description
Product Overview
The BD08K with motorized slide is the 8 kW member of the robot cutting head pair: a BD08K cutting head mounted on an external Z-axis slide, intended for robot laser cutting. The slide supplies Z travel beyond what the robot wrist can provide, focus travels -32 to +32 mm for fast and wide adjustment, and four protective lenses sit in the optical path to slow contamination and extend the life of the core optics. The lower protective lens is temperature monitored with an over-temperature alarm, so a failing lens is caught before it damages the optics behind it. The base BD08K head weighs approximately 4.4 kg, the fiber interface is QBH or G5, and the -90 degree variant of the same head extends the platform to 3D tube cutting.
Key Features
- 8 kW high power: the higher power member of the pair, intended for medium and high power tube cutting
- External Z axis: the motorized slide adds Z-direction travel beyond what the head body provides
- Four protective lenses: four layers in the optical path reduce contamination reaching the core optics and extend lens life
- Collimating focus: focus travel of -32 to +32 mm, fast to move and wide enough for wall thickness changes without re-setting the nozzle
- Smart monitoring: the lower protective lens is temperature monitored, with an over-temperature alarm
Technical Specifications
| Parameter | Specification |
|---|---|
| Power rating | 8 kW |
| Fiber interface | QBH, G5 |
| Focus range | -32 to +32 mm |
| Z-axis type | external motorized slide |
| Weight (BD08K head) | approx. 4.4 kg |
| Brand | Empower / RayTools |
The 4.4 kg figure is the base BD08K head. The motorized slide adds its own mass, and that total is what the robot has to carry, so the payload margin must be calculated with the slide included. Slide stroke is a property of the slide selected with the head and is not fixed by the head itself.
Series Comparison
| Model | Power | Application | Z axis |
|---|---|---|---|
| BD04K+SLIDE | 4 kW | tube and profile | external Z axis |
| BD08K+SLIDE | 8 kW | tube and profile | external Z axis |
| BT220RC+SLIDE | 1.5 kW | thin sheet, 3D | external Z axis |
The two BD combinations differ mainly in power and in the thermal margin that comes with it: 4 kW for thin-wall tube, 8 kW for medium and high power tube work where the same slide and robot concept is retained. The BT220RC combination is a 1.5 kW thin-sheet 3D head, not a tube head.
Applications
Robot tube cutting and profile cutting at 8 kW: medium and high power work on round, square and rectangular tube and on open sections, in automated cells where the robot presents the head and the slide supplies the Z stroke. Also specified where an existing robot cell needs more Z travel than the wrist offers, and where the -90 degree variant is used for three-dimensional tube work on the same platform.
FAQ
What is the -90 degree variant? The manufacturer lists a -90 degree version of the BD08K that supports 3D tube cutting, while the standard version of this combination is specified for tube and open-profile work in the flat presentation. Because the two configurations are ordered separately, state which one you need at order stage and confirm the cutting orientation with us against your part drawing.
Why four protective lenses? Each lens in the stack is a cheap consumable that takes contamination before it reaches the collimating and focusing optics. Four layers mean the stack can be replaced more often without touching the expensive optics, which matters on an 8 kW process where spatter and fume load is high.
Does the 4.4 kg weight include the slide? No. It is the base BD08K head only. The slide mass has to be added for the robot payload calculation.
Disclaimer
Specifications are taken from the manufacturer data current at the time of publication and are subject to change without notice. The weight quoted is the base head; total moving mass depends on the slide supplied. The -90 degree variant is a separate configuration and must be ordered as such. Actual cutting performance depends on the laser source, the process gas, the material grade and the machine kinematics.
Contact Us
Changsha Soar Laser Equipment Co., Ltd. supplies this cutting head with configuration checks against your laser source, robot or CNC, and your process gas supply. Hotline +86 159-2722-0467, e-mail 859818709@qq.com, www.soar-laser.cn.








Reviews
There are no reviews yet.