QQ: 859818709

RayTools BS08K CAT-3D 8 kW 3D Smart Laser Cutting Head, International Edition

RayTools BS08K CAT-3D 8 kW 3D Smart Laser Cutting Head, International Edition

Price on request
Category:

Description

Product Overview

The BS08K CAT-3D is the 3D tube-cutting version of the new-generation CAT series all-in-one smart laser cutting head, supplied in international edition and rated 8 kW. It carries the CAT-series smart sensing package, with piercing detection, process monitoring and shared-edge detection, and it works in three dimensions, so the head follows a tube contour and cuts end faces, holes and angled features instead of flat sheet only. Focus is commanded over EtherCAT, Profinet, 0-10 V or pulse, and paired with the XC4000T or XC3000T control system the head runs in full closed loop over EtherCAT. The intended platform is a medium or high power tube laser machine, where an 8 kW source needs a head that keeps up with both the power and the motion.

Key Features

  • 3D tube cutting: built for three-dimensional tube work, including end-face, hole and angled cuts, not flat sheet only
  • All-in-one smart design: single-body construction that integrates the optical path, the focus drive and the sensing electronics
  • Multi-protocol focusing: focus control over EtherCAT, Profinet, 0-10 V analog or pulse
  • Smart piercing and process monitoring: piercing detection and process monitoring are built in, and shared-edge detection is supported
  • Four protective lenses: four layers in the optical path slow down contamination and extend the life of the core optics
  • TRA anti-collision protection: the nozzle assembly is protected against impact so a crash does not destroy the head body
  • Full closed-loop control: EtherCAT closed loop together with the XC4000T or XC3000T control system

Technical Specifications

Parameter Specification
Power rating 8 kW
Wavelength 1080 nm
Fiber interface QBH, QD, G5
Focus range -17.7 to +17.6 mm (F150 mm); -32 to +32 mm (F200 mm)
Focus speed up to 200 mm/s
Focus resolution 0.01 mm
Numerical aperture 0.14
Assist gas pressure up to 25 bar
Nozzle cooling gas cooled
Weight approx. 8.2 kg
Brand Empower / RayTools

Series Comparison

Model Power Focus range (F200) Weight Application
BS04K CAT-3D 4 kW ±32 mm approx. 7.5 kg 3D tube cutting
BS08K CAT-3D 8 kW ±32 mm approx. 8.2 kg 3D tube cutting
BS15K CAT-3D 15 kW ±72 mm approx. 8.2 kg 3D tube cutting

All three CAT-3D models share the same 3D tube capability and the same mounting concept, so a machine builder can move a design from 4 kW to 8 kW to 15 kW without reworking the kinematics. The 8 kW model sits in the middle: it keeps the ±32 mm focus travel of the 4 kW model while doubling the power, at a mass of about 8.2 kg, which is what most stainless and aluminium tube lines above 4 kW actually need. The 15 kW model is the one with ±72 mm travel and a water-cooled nozzle. Note that the CAT-2D versions of the same power classes are flat-sheet heads and cannot follow a tube contour.

Applications

Tube processing and profile cutting on dedicated tube laser machines at 8 kW: three-dimensional cutting of round, square and rectangular tube, where the head follows the tube contour and cuts end faces, holes and angled features. Medium and high power tube lines that need more speed on stainless steel, aluminium and thicker carbon steel than a 4 kW head can deliver, and where the machine is built around a rotary chuck rather than a flat bed.

FAQ

Why are there two focus ranges? The range depends on the focusing lens fitted. With an F150 mm lens the travel is -17.7 to +17.6 mm; with an F200 mm lens it is -32 to +32 mm. The F200 configuration is the one usually quoted for tube work because the longer focal length gives a larger spot and more tolerance to standoff variation on a curved surface.

What is needed for full closed-loop control? The head itself accepts EtherCAT, Profinet, 0-10 V or pulse commands. Full closed loop is achieved together with the XC4000T or XC3000T control system, which reads the head feedback and closes the loop in the CNC.

Is the nozzle water cooled on this model? No. The 8 kW head uses gas cooling for the nozzle and is rated to 25 bar assist gas. Water cooling of the nozzle, together with a 30 bar gas rating, is introduced on the 15 kW model, where the thermal load justifies it.

Can this head cut flat sheet as well? It can cut sheet, but the reason to buy the CAT-3D rather than the CAT-2D is the third axis of tube capability. If the machine never rotates a tube, the BS08K CAT-2D is the simpler and cheaper choice.

Disclaimer

Specifications are taken from the manufacturer data current at the time of publication and are subject to change without notice. Focus range depends on the focusing lens actually fitted, and assist gas pressure depends on the gas supply and the nozzle selected. Actual cutting performance depends on the laser source, the process gas, the material grade and the machine kinematics. Confirm the configuration, the fiber interface and the control protocol against your machine before ordering.

Contact Us

Changsha Soar Laser Equipment Co., Ltd. supplies this cutting head with configuration checks against your laser source, robot or CNC, and your process gas supply. Hotline +86 159-2722-0467, e-mail 859818709@qq.com, www.soar-laser.cn.

Reviews

There are no reviews yet.

Be the first to review “RayTools BS08K CAT-3D 8 kW 3D Smart Laser Cutting Head, International Edition”

Your email address will not be published. Required fields are marked *

中文EN