Description
Product Overview
The D128F rotary fixture uses a reinforced design with timing belt transmission for higher torque, making it suitable for heavy workpieces. The D128 chuck has a diameter of 128 mm. The fixture uses a high-grade cast iron three-jaw chuck with moderate hardness, stable clamping, accurate positioning, smooth running and low friction. It supports stepless 0° – 90° tilt adjustment with manual locking, adapting flexibly to the required machining angle of different workpieces. An industrial standard aviation connector makes it compatible with most fiber laser marking control boards and ready to use. A stepper motor and driver plus timing belt transmission provide smooth, quiet rotation, making it an ideal rotary attachment for laser cylindrical marking, welding and cutting.
Key Features
-
🔩 High-Grade Cast Iron Three-Jaw Chuck
A high-grade cast iron three-jaw self-centering chuck offers moderate hardness, even clamping force and high positioning accuracy. The three jaws move in synchronism so the workpiece self-centers without manual jaw-by-jaw adjustment, greatly improving setup efficiency. The chuck surface is finely machined for smooth running and low friction, and resists wear over long service. -
📐 Stepless Multi-Angle Adjustment
Stepless tilt adjustment from 0° to 90° with a stable manual locking mechanism. 0° is horizontal and 90° is vertical, with any intermediate angle selectable. The flexible angle adjustment covers cups, tubes, rings and other workpiece shapes, one fixture for many jobs. -
🔌 Industrial Standard Aviation Connector
An industrial standard aviation connector is directly compatible with the control boards of most fiber laser marking and engraving machines. Plug and play with no extra modification or rewiring, which shortens system integration time and lowers cost. -
⚙️ Stepper Motor and Timing Belt Drive
Equipped with a 60×88 mm stepper motor and a DM542 driver, the timing belt drive provides a 2.5:1 reduction for high torque and smooth rotation. Belt transmission keeps noise and vibration low, so marking accuracy stays consistent throughout rotation. A Ø24 mm through bore allows long shafts to pass through for machining. -
🔧 Easy Installation
Mounting holes measure 100 × 50 mm (M5/M6) and bolt directly onto the laser machine worktable. The 115 mm center height works with a lift table for precise focus adjustment. The reinforced F version offers 2.5:1 belt reduction, high torque, a through bore and excellent vibration damping.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | D128F rotary fixture |
| Chuck specification | D128 mm three-jaw self-centering chuck |
| Clamping range A (external) | 2.5 – 40 mm |
| Clamping range B (internal expansion) | 40 – 110 mm |
| Clamping range C (reverse jaws) | 35 – 95 mm |
| Tilt adjustment | 0° – 90° |
| Motor | 60×88 mm stepper motor |
| Driver | DM542 driver |
| Transmission | Timing belt, 2.5:1 reduction |
| Through bore diameter | Ø24 mm |
| Center height | 115 mm |
| Dimensions | 280 × 130 × 200 mm |
| Mounting hole spacing | 100 × 50 mm (M5/M6) |
| Weight | 9.5 kg |
| Interface | Industrial standard aviation connector |
Technical Notes
The rotary fixture drives the three-jaw chuck through a stepper motor and works in step with the galvo motion of the laser marking machine to mark cylindrical workpieces over a full 360°. During operation the galvo scans along the X axis while the fixture indexes in the rotation direction, and the two together complete marking of the whole cylindrical surface. Chuck clamping is available in three modes: external clamping (A), internal expansion (B) and reverse jaws (C), covering workpieces of different shapes and sizes. The 2.5:1 timing belt reduction provides fine angular resolution while maintaining sufficient torque, which safeguards marking quality. During installation, make sure the rotation axis is perpendicular to the laser beam and that the center height matches the focus height.
Applications
- Laser marking on cylindrical stainless steel vacuum flasks
- Laser engraving of rings, bracelets and other jewellery
- Laser lettering on pen barrels and tubular parts
- Laser marking of bearing inner and outer rings
- Rotary support for laser welding of valves and flange fittings
Selection Guide
When choosing a rotary fixture, first confirm the maximum workpiece diameter; the chuck size should be larger than the workpiece diameter. D69 suits small workpieces (rings, pen barrels and similar), D80 suits medium workpieces (vacuum flasks, small tubes), and D100/D125 suit large workpieces (large diameter pipes, bearings and similar). The E version is the standard type, the F version is reinforced with higher torque, and the C version is compact; low-profile versions suit machines with limited Z axis space. Roller types suit long slender workpieces that cannot be held in a chuck. Confirm driver interface compatibility with the machine control board before ordering.
Series Comparison
| Model | Chuck diameter | Clamping range (external) | Tilt | Weight |
|---|---|---|---|---|
| D69E | Ø69 mm | 1 – 20 mm | 0° – 90° | 3.2 kg |
| D80E | Ø80 mm | 2 – 22 mm | 0° – 90° | 4.6 kg |
| D100E | Ø100 mm | 2 – 30 mm | 0° – 90° | 7.0 kg |
| D125E | Ø125 mm | 2.5 – 40 mm | 0° – 90° | 9.5 kg |
About the Brand
Soar Laser (Changsha Soar Laser Equipment Co., Ltd.) specialises in the development and manufacture of laser processing equipment accessories, with a focus on laser rotary fixtures, optical tables and laser accessories. Its products are known for high precision, high stability and excellent value, and are widely used to upgrade fiber laser marking machines, laser welding machines and similar equipment, earning the trust of laser equipment manufacturers and end users at home and abroad.
Contact Us
For more product information or a quotation, please contact our technical sales team:
📞 Hotline: +86 159-2722-0467
We provide professional technical selection support, volume purchase discounts and comprehensive after-sales service. Website: www.soar-laser.cn








Reviews
There are no reviews yet.