QQ: 859818709

RayTools GF101 + GF102 Robot Laser Cutting System with Built-in Z Axis and A/B Interpolation

RayTools GF101 + GF102 Robot Laser Cutting System with Built-in Z Axis and A/B Interpolation

Price on request
Category:

Description

Product Overview

The GF101 + GF102 is a two-unit robot cutting system, not a single head. The GF101 delivers the beam and carries the built-in Z axis; the GF102 is a small-contour interpolation subsystem that adds A/B rotary axes between the robot flange and the head. Splitting the job this way lets the robot run its fast coarse path while the GF102 performs the fine interpolation, so small contours are cut at robot maximum speed instead of at the speed the arm can trace a 1 mm circle. The smallest contour is a 1 mm diameter circle held to about 0.1 mm, 128 shapes are stored in the subsystem so common contours need no teach programming, and cutting software is supplied with the pair.

Key Features

  • Small-contour cutting: down to a 1 mm diameter circle at about 0.1 mm, which a robot wrist cannot trace on its own at production speed
  • A/B axis interpolation: a two-axis rotary mechanism between flange and head produces the fine 3D path
  • Built-in follow-up: the GF101 supplies the Z follow-up, so the robot is not asked to generate the complex stand-off motion as well
  • 128 preset shapes: common contours are stored in the subsystem, so no teach programming is needed for them
  • Cutting software included: a full human-machine interface ships with the system for shape selection and process settings
  • Compact assembly: the pair is small and light enough to sit on a robot arm without reworking the cell

Technical Specifications

Parameter Specification
Maximum cutting diameter (GF102) 45 mm
Single-axis maximum speed 75 r/min
Single-axis maximum acceleration 137 rad/s2
Positioning accuracy 0.02 mm
Repeatability 0.01 mm
Preset shapes 128
Weight, GF102 with GF101 fitted approx. 11.0 kg
Smallest contour 1 mm diameter circle
Contour accuracy at smallest contour about 0.1 mm
Brand Empower / RayTools

The accuracy figures answer different questions and should not be read as one number. The 0.02 mm positioning and 0.01 mm repeatability are axis specifications of the GF102 mechanism. The 0.1 mm figure is the accuracy achieved on the smallest contour, a 1 mm circle, where the interpolation radius itself is the limit. The 45 mm figure is the maximum cutting diameter of the interpolation envelope, above which the robot path takes over.

Operating Principle

The two units divide the work. The GF101 is the optical unit: it takes the fibre, collimates and focuses the beam, and holds stand-off through its built-in Z follow-up. The GF102 is the motion unit: its A and B rotary axes tilt the head around the contour so the beam normal follows the surface, and its interpolation generates the small circular or profiled path. The robot therefore only has to bring the assembly to the region and move between features; the fine path and the surface normal come from the GF102. This is why the pair can cut a 1 mm circle at robot maximum speed: the arm is not asked to trace it.

Series Comparison

Model Axis configuration Smallest contour Application
GF101+GF102 Z axis + A/B axes 1 mm circle precision 3D cutting
GF101 Z follow-up only not applicable 3D cutting
GF101F Z axis + autofocus not applicable 3D cutting
GF501 5-axis, DD motor 5-axis simultaneous 3D cutting

Read the table by what each configuration can generate. A GF101 alone follows the surface but cannot produce a small closed contour, because the path has to come from the robot. Adding the GF102 supplies the A/B interpolation that makes small contours possible. The GF101F swaps manual focus for autofocus but does not add rotary axes. The GF501 does the same job with five simultaneous axes and direct-drive motors at a much higher mass and price.

Applications

Robot laser cutting of automotive parts, aerospace sheet components and precision 3D parts where small holes, slots and tight profiled contours dominate the feature mix. Also used where a robot cell has to cut many repeating small shapes and teach programming each one is not economic.

Selection Guide

Take the GF101 + GF102 pair when the workpiece carries many small contours, holes under roughly 45 mm, or profiles that a wrist cannot trace accurately. If the job is mostly large sweeping 3D contours, the GF101 on its own is enough and the extra axes only add mass. If the geometry needs five simultaneous axes with a fully closed-loop direct-drive head, look at the GF501 instead. Confirm the robot payload with the 11 kg assembly, cable pack and gas hose included.

FAQ

Does the robot still have to follow the contour? For small features, no. The GF102 generates the interpolated path and the surface normal, so the arm only positions the assembly. For large contours beyond the 45 mm interpolation envelope, the robot path does the work.

Do I have to teach every shape? Not for the stored ones. 128 shapes are preset in the subsystem and selected from the supplied software, so common holes and profiles need no teach programming.

Can I buy the GF102 on its own? The GF102 is a subsystem that carries a cutting head, so it is specified together with a head. Tell us which head you already run and we will confirm the mechanical and electrical match.

Disclaimer

Specifications are taken from the manufacturer data current at the time of publication and are subject to change without notice. Axis ratings, the interpolation envelope and the achievable contour accuracy depend on the head fitted, the robot model and the process parameters. Actual results vary with the laser source, the process gas and the material grade.

Contact Us

Changsha Soar Laser Equipment Co., Ltd. supplies this unit with a configuration check against your laser source, your cutting head and your controller. Hotline +86 159-2722-0467, e-mail 859818709@qq.com, www.soar-laser.cn.

Reviews

There are no reviews yet.

Be the first to review “RayTools GF101 + GF102 Robot Laser Cutting System with Built-in Z Axis and A/B Interpolation”

Your email address will not be published. Required fields are marked *

中文EN