Description
Product Overview
The SCANLAB basiCube 10d is an entry-level digital scanning galvanometer with a 10 mm clear aperture, part of the laser scanning portfolio of SCANLAB, one of the world leading manufacturers of galvo scanning systems. It offers a scan angle of ±0.35 rad, RMS repeatability below 2 μrad, non-linearity below 0.9 mrad/44°, a marking speed below 3.0 m/s and a positioning speed below 20.8 m/s, and is widely used in laser marking, welding, cutting and other industrial applications.
Key Features
⚡ High-Speed Scanning Performance
Marking speed reaches 3.0 m/s and positioning speed 20.8 m/s, with a tracking error of only 0.10 ms. The optimised servo control algorithm guarantees smooth transitions between high-speed jumps and low-speed marking, and the short small-step response time keeps marking quality high even during high-speed jump marking.
🎯 High-Precision Positioning
RMS repeatability is below 2 μrad, non-linearity below 0.9 mrad/44°, gain drift below 160 ppm/K, zero drift below 30 μrad/K and 8-hour thermal drift below 100 μrad (after a 30-minute warm-up). Precision optical sensors combined with advanced automatic thermal drift compensation maintain excellent positioning stability and process consistency over long continuous runs.
🌡️ Ultra-Low Thermal Drift
Fine photoelectric sensor technology and an advanced automatic thermal drift compensation algorithm effectively overcome the thermal drift problem inherent to galvanometer scanners. Zero-point thermal drift is only below 30 μrad/K, gain thermal drift below 160 ppm/K and 8-hour long-term drift below 100 μrad, meeting the stability requirements of the vast majority of long-duration, high-volume marking and welding applications. Consistent processing quality is maintained even when the ambient temperature fluctuates by ±10 °C.
🔧 dynAXIS High-Performance Galvo Motors
The scanner uses dynAXIS series high-performance galvanometer motors: the rotor employs high-energy-density permanent magnets together with low-friction precision bearings, giving a high torque constant and low rotor inertia. The motors deliver excellent dynamic response while maintaining scanning accuracy, and hold stable output during long continuous operation.
📡 High-Precision Analog/Digital Servo Driver Board
A high-performance SCANLAB servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage interference-suppression protection array circuit with first-tier international brand components, and every unit is subjected to 360 hours of extended burn-in before shipment, ensuring long-term, reliable operation even in harsh electromagnetic environments.
🔌 Interface Compatibility
The scanner supports the SL2-100/XY2-100 standard communication protocols. SL2-100 provides 20-bit digital resolution (0.76 μrad) and XY2-100 provides 16-bit resolution (12 μrad). It is compatible with the vast majority of laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series), ready for plug-and-play and efficient system integration. Power supply requirement is 24 V DC/3 A, and the interface cable is shielded to effectively suppress external electromagnetic interference.
❄️ Efficient Heat Dissipation
The scanner is air cooled. Optimised cooling fins combined with an efficient heat conduction path keep it stable over long periods within the rated power range. The compact housing balances thermal performance against space efficiency, making it easy to integrate into all kinds of laser processing machines.
🛡️ High-Reliability Design
SCANLAB products strictly follow German manufacturing standards, and every unit undergoes comprehensive quality inspection plus long-term burn-in verification before shipment. Protection class is IP50/IP56 depending on model, ensuring long-term reliability in industrial environments.
Detailed Specifications
| Optical Parameters | |
|---|---|
| Clear aperture | 10 mm |
| Scan angle | ±0.35 rad |
| Max. power handling | 150 W |
| Mirror coating wavelengths | 355 nm/532 nm/1064 nm/10600 nm |
| Scanning Parameters | |
|---|---|
| Non-linearity | below 0.9 mrad/44° |
| Tracking time | 0.10 ms |
| Repeatability (RMS) | below 2 μrad |
| Marking speed | below 3.0 m/s |
| Positioning speed | below 20.8 m/s |
| Gain drift | below 160 ppm/K |
| Zero drift | below 30 μrad/K |
| 8-hour thermal drift (after 30 min warm-up) | below 100 μrad |
| Electrical Parameters | |
|---|---|
| Power supply | 24 V DC/3 A |
| Input signal protocol | SL2-100/XY2-100 |
| Cooling | Air cooled |
| Mechanical Parameters | |
|---|---|
| Operating temperature | 25 ± 10 °C |
| Dimensions (L × W × H) | 105 × 91 × 91 mm |
| Weight | 1.5 kg |
Operating Principle
A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvanometer motors independently deflect the X-axis and Y-axis mirrors, steering the incoming laser beam to any point on the work plane and so forming a two-dimensional scan field. A galvanometer motor is essentially a limited-rotation servo motor: when the driver board feeds control current into the motor coils, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (an analog position detector, APD, or a digital encoder) measures the rotor angle in real time and compares it with the command to close the servo loop. Scanning speed depends on the dynamic response of the motor, and the tracking time (tracking error) describes how much the scanner lags the command signal, which is the key indicator of high-speed performance.
Applications
Laser Marking
Suitable for marking text, patterns, QR codes and serial numbers on metal and non-metal surfaces. Marking is accurate, fast and permanent, and is widely used in the electronics, hardware tool and medical device industries.
Laser Welding
Used for precision welding such as lap welding of thin sheets and spot welding. The heat-affected zone is small and distortion is minimal, which suits precision components.
Laser Cutting
Combined with a laser of suitable power, it delivers precision cutting of thin metal and non-metallic materials with a narrow kerf, high speed and good edge quality.
3D Printing / Additive Manufacturing
Used for laser scanning in SLM/SLS metal additive manufacturing, precisely controlling laser energy distribution and scan paths so that the sintering quality of every layer is assured.
Precision Micro-Machining
Suitable for precision micro-structure processing in semiconductor, microelectronics and photonics applications, such as micro-hole drilling, micro-channel etching and thin-film patterning.
Laser Cleaning
Combined with a high-power pulsed laser, it is used for selective cleaning of oxide layers, coatings and contamination on metal surfaces without damaging the substrate.
Research and Education
Suitable for laser processing experiments in universities and research institutes, and a common laboratory tool in optical engineering, materials science and advanced manufacturing.
Selection Guide
When choosing a scanning galvanometer, first determine the clear aperture from the laser power: 8-10 mm below 100 W, 10-14 mm for 100-500 W and 20-30 mm above 500 W. Then choose the scanner grade according to the accuracy requirement: the economical 10C covers 90% of routine marking needs, while the high-precision 14AW-III-Pro suits precision marking and welding. For high-end applications, German-imported scanners offer higher accuracy and stability, and the excelliSCAN series with digital encoders and SCANahead control technology meets the most demanding precision processing requirements. Scan speed and dynamic performance depend on the application: marking is judged mainly by marking speed and writing speed, whereas welding is judged by welding speed and tracking error.
Series Comparison
| Model | Clear Aperture | Tracking Error | Marking Speed | Positioning Speed | Writing Speed (high quality) | Position Detection | Reference Price |
|---|---|---|---|---|---|---|---|
| basiCube 10 | 10 mm | 0.14 ms | below 2.5 m/s | below 12.8 m/s | 570 cps | Analog APD | On request |
| basiCube 10d | 10 mm | 0.10 ms | below 3.0 m/s | below 20.8 m/s | 590 cps | Digital | On request |
| basiCube 14 | 14 mm | 0.14 ms | below 2.0 m/s | below 12 m/s | 500 cps | Analog APD | On request |
About the Brand
SCANLAB GmbH is a leading global manufacturer of laser scanning galvanometer systems, founded in 1990 and headquartered in Munich, Germany. Its product range covers the full spectrum from the entry-level basiCube to the flagship excelliSCAN, and is widely used in laser marking, welding, cutting, micro-machining and additive manufacturing. With innovative SCANahead control technology and dynAXIS series digitally encoded galvanometer motors, SCANLAB continues to lead the industry and is renowned worldwide for accuracy, stability and dynamic performance.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
🌐 Website: www.soar-laser.cn
We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.





Reviews
There are no reviews yet.