Description
Product Overview
The intelliSCAN III 10 is a third-generation intelligent scanning galvanometer from the German company SCANLAB, a leading global supplier of laser scanning systems. The clear aperture is 10 mm, the scan angle ±0.35 rad, repeatability <2 μrad, non-linearity <0.9 mrad/44°, marking speed <3.5 m/s and positioning speed <12 m/s. It is widely used in industrial applications such as laser marking, welding and cutting.
Key Features
⚡ High-Speed Scanning Performance
Marking speed reaches 3.5 m/s, positioning speed 12 m/s, and the tracking error is only 0.11 ms. The optimized servo control algorithm guarantees smooth switching between high-speed jumps and low-speed marking, with short small-step response time, so high-quality marking is maintained even during high-speed jump marking.
🎯 High-Precision Positioning
Repeatability (RMS) <2 μrad, non-linearity <0.9 mrad/44°, gain drift <15 ppm/K, zero drift <15 μrad/K, 8-hour thermal drift <100 μrad (after 30 minutes warm-up). Precise optical sensors and advanced automatic thermal drift compensation maintain excellent positioning stability and process consistency during long continuous operation.
🌡️ Ultra-Low Thermal Drift
Fine optoelectronic sensor technology and an advanced automatic thermal drift compensation algorithm effectively overcome the thermal drift problem of galvanometer scanners. Zero-point thermal drift is only <15 μrad/K, gain thermal drift <15 ppm/K and 8-hour long-term drift <100 μrad, meeting the stability requirements of most long-duration, large-scale marking and welding applications. Consistent process quality is maintained even when the ambient temperature fluctuates by ±10 °C.
🔧 dynAXIS Series High-Performance Galvo Motors
dynAXIS series high-performance galvanometer motors are used, with rotors built from high-energy-density permanent magnets and low-friction precision bearings, giving a high torque constant and low rotor inertia. The motors deliver excellent dynamic response while maintaining scanning accuracy, and keep stable output during long continuous operation.
📡 High-Precision Analog/Digital Servo Driver Board
The SCANLAB high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit design, first-tier international brand core components, and 360 hours of burn-in ageing before shipment, ensuring long-term stable and reliable operation in harsh electromagnetic environments.
🔌 Interface Compatibility
The product supports the SL2-100 / XY2-100 standard communication protocols: SL2-100 provides 20-bit digital resolution (0.76 μrad) and XY2-100 provides 16-bit resolution (12 μrad). It is compatible with the vast majority of laser control cards on the market (such as JCZ EZCAD series, SCANLAB RTC series, RAYLASE SP-ICE series), plug-and-play, for convenient and efficient system integration. Power supply requirement 30 V DC / 3 A; interface cables use a shielded design that effectively suppresses external electromagnetic interference.
❄️ Efficient Cooling System
The product is air cooled. Optimized cooling fin design combined with an efficient heat conduction path keeps the scanner running stably over long periods within its rated power range. The compact body balances cooling performance and space utilization, suitable for integration into all kinds of laser processing equipment.
🛡️ High-Reliability Design
SCANLAB products strictly follow German manufacturing standards; every unit undergoes comprehensive quality inspection and long burn-in verification before shipment. Protection class IP50 / IP56 (depending on model) ensures long-term reliable operation in industrial environments.
Technical Specifications
| Optical Parameters | |
|---|---|
| Clear aperture | 10 mm |
| Scan angle | ±0.35 rad |
| Maximum power handling | 150 W |
| Mirror reflection wavelength | Full series of coatings available |
| Scanning Parameters | |
|---|---|
| Non-linearity | <0.9 mrad/44° |
| Tracking time | 0.11 ms |
| Repeatability (RMS) | <2 μrad |
| Marking speed | <3.5 m/s |
| Positioning speed | <12 m/s |
| Gain drift | <15 ppm/K |
| Zero drift | <15 μrad/K |
| 8-hour thermal drift (after 30 min warm-up) | <100 μrad |
| Electrical Parameters | |
|---|---|
| Power supply | 30 V DC / 3 A |
| Input signal protocol | SL2-100 / XY2-100 |
| Cooling method | Air cooling |
| Mechanical Parameters | |
|---|---|
| Operating temperature | 25 ± 10 °C |
| Dimensions (L×W×H) | 110 x 90 x 95 mm |
| Weight | 3 kg |
Operating Principle
A laser galvanometer scanning system is a high-precision beam positioning device based on the principle of electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, directing the incoming laser beam to any position on the working plane to form a two-dimensional scanning field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coils, the electromagnetic torque drives the rotor and mirror to the commanded angle; a position sensor (analog position detector APD or digital encoder) continuously measures the rotor angle, which is compared with the commanded position to close the servo loop. Scanning speed depends on the dynamic response of the motor, and the tracking time characterizes how much the scanner lags behind the command signal; it is the key figure of merit for high-speed performance.
Applications
Laser Marking
Suitable for marking text, patterns, QR codes and serial numbers on metal and non-metal surfaces, with high marking accuracy, high speed and durable results. Widely used in electronic components, hardware tools, medical devices and other industries.
Laser Welding
Can be used for precision welding such as lap welding of thin sheets and spot welding, with a small heat-affected zone and little distortion, suitable for welding precision parts.
Laser Cutting
Combined with a laser of appropriate power, it enables precision cutting of thin metal and non-metal materials with a narrow kerf, high speed and good edge quality.
3D Printing / Additive Manufacturing
Used for laser scanning in SLM / SLS metal additive manufacturing, precisely controlling the laser energy distribution and scan path to ensure the sintering quality of every layer.
Precision Micro-Machining
Suitable for precision microstructure processing in semiconductor, microelectronics and photonics applications, such as micro-hole drilling, micro-channel etching and thin-film patterning.
Laser Cleaning
Combined with a high-power pulsed laser, it is used for selective cleaning of oxide layers, coatings and contamination on metal surfaces without damaging the substrate.
Research and Education
Suitable for laser processing experiments in universities and research institutes; a common experimental device in optical engineering, materials science and advanced manufacturing.
Selection Guide
When choosing a scanning galvanometer, first determine the clear aperture from the laser power: 8-10 mm below 100 W, 10-14 mm for 100-500 W, and 20-30 mm above 500 W. Then select the scanner class according to the required processing accuracy: the economical 10C model covers 90 % of routine marking needs; the high-precision 14AW-III-Pro suits precision marking and welding; for high-end applications, German-imported scanners offer higher accuracy and stability, and the excelliSCAN series with digital encoders and SCANahead control technology suits the most demanding precision processing. Scanning speed and dynamic performance depend on the application: marking is judged mainly by marking speed and writing speed, while welding is judged by welding speed and tracking error.
Model Comparison
| Model | Clear aperture | Tracking error | Marking speed | Repeatability | Position detection | Max laser power | Reference price (CNY) |
|---|---|---|---|---|---|---|---|
| intelliSCAN IV 10 | 10 mm | 0.11 ms | <3.5 m/s | <2 μrad | Analog APD | 150 W | On request |
| intelliSCAN se 14 | 14 mm | 0 ms | <4 m/s | <0.4 μrad | Digital encoder | 500 W | On request |
| intelliSCAN 14 | 14 mm | 0.32 ms | <1.0 m/s | <2 μrad | Analog APD | 500 W | On request |
| intelliSCAN 20 | 20 mm | 0.32 ms | <1.0 m/s | <2 μrad | Analog APD | 1000 W | On request |
| intelliSCAN 30 | 30 mm | 0.55 ms | <0.7 m/s | <2 μrad | Analog APD | 5000 W | On request |
| intelliSCAN III 10 | 10 mm | 0.11 ms | <3.5 m/s | <2 μrad | Analog APD | 150 W | On request |
| intelliSCAN III 20 | 20 mm | 0.32 ms | <2.0 m/s | <2 μrad | Analog APD | 2000 W | On request |
| intelliSCAN III 30 | 30 mm | 0.55 ms | <0.7 m/s | <2 μrad | Analog APD | 5000 W | On request |
About the Brand
SCANLAB GmbH, Germany, is a leading global manufacturer of laser scanning galvanometer systems, founded in 1990 and headquartered in Munich. The SCANLAB product line ranges from the entry-level basiCube to the flagship excelliSCAN series and is widely used in laser marking, welding, cutting, micro-machining and additive manufacturing. With innovative SCANahead control technology and dynAXIS series digital encoder galvo motors, SCANLAB continues to lead the industry in accuracy, stability and dynamic performance.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
We provide professional galvo scanner selection advice and complete system integration solutions. Call us today!





Reviews
There are no reviews yet.