QQ: 859818709

SCANLAB powerSCAN II 70i 2500 W CO₂ 3D Galvo Scanner, 70 mm Aperture

SCANLAB powerSCAN II 70i 2500 W CO₂ 3D Galvo Scanner, 70 mm Aperture

Price on request
Category:

Description

Product Overview

The SCANLAB powerSCAN II 70i is a 70 mm extra-large-aperture high-power 3D galvo scanner from SCANLAB GmbH, a leading global manufacturer of laser scanning systems. The scan head provides a 70 mm clear aperture and uses a post-objective 3D scanning design with an integrated Z-axis dynamic focusing module, so flat and curved surfaces can be processed accurately with linked XYZ motion. Maximum laser power is 2500 W (CO₂), the scan angle is ±0.35 rad and repeatability is below 4 µrad. It suits precision laser processing of large-format and curved workpieces.

Key Features

⚡ High-Speed Scanning

Marking speed is not fixed for this model and depends on the controller and process parameters, while positioning speed reaches 27 rad/s and tracking error is 1.6 ms. The optimised servo control algorithm ensures smooth switching between high-speed jumps and low-speed marking, with a short small-step response, so high marking quality is maintained even during high-speed jump marking.

🎯 High-Precision Positioning

Repeatability (RMS) is below 4 µrad, non-linearity below 2.1 mrad/44°, gain drift below 50 ppm/K, zero-point drift below 50 µrad/K and 8-hour thermal drift below 50 µrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation maintain excellent positioning stability and process consistency during long continuous operation.

🌡️ Ultra-Low Thermal Drift

Fine photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm overcome the thermal drift problem of galvo scanners. Zero-point thermal drift is only below 50 µrad/K, gain thermal drift below 50 ppm/K and 8-hour long-term drift below 50 µrad, meeting the stability requirements of most long-duration, large-scale marking and welding applications. Process quality stays consistent even when the ambient temperature fluctuates by ±10 °C.

🔧 dynAXIS High-Performance Galvo Motors

dynAXIS series high-performance galvo motors use high-energy-density permanent magnets in the rotor together with low-friction precision bearings, giving a high torque constant and low rotor inertia. The motors deliver excellent dynamic response while preserving scanning accuracy, and maintain stable output during long continuous operation.

📡 High-Precision Analog/Digital Servo Driver Board

The SCANLAB high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit and first-tier international components, and every unit is subjected to a 360-hour extended burn-in before shipment, ensuring long-term stable and reliable operation in harsh electromagnetic environments.

🔌 Interface Compatibility

The scan head supports the SL2-100 standard communication protocol, which provides 20-bit digital resolution (0.76 µrad); the XY2-100 protocol provides 16-bit resolution (12 µrad). It is compatible with most laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series) for plug-and-play, efficient system integration. The power supply requirement is 48 V DC / 10 A (20 A peak), and the interface cables are shielded to suppress external electromagnetic interference.

❄️ Efficient Cooling System

Water cooling combined with forced air cooling is used. The water circuit covers the galvo mount and the entrance aperture, effectively controlling mirror temperature rise and preventing beam drift and focus shift caused by thermal lensing. Under high-power, long-duration continuous operation the water cooling keeps the scan head within its optimum temperature range for consistent process quality.

🛡️ High-Reliability Design

SCANLAB products strictly follow German manufacturing standards, and every unit undergoes full quality inspection and long-term burn-in verification before shipment. The protection class is IP50/IP56 depending on model, ensuring long-term reliable operation in industrial environments.

Detailed Specifications

Optical Parameters
Clear aperture 70 mm
Scan angle ±0.35 rad
Max. laser power 2500 W (CO₂)
Mirror coating wavelength 9400 nm / 10600 nm (CO₂)
Scanning Parameters
Non-linearity below 2.1 mrad/44°
Tracking time 1.6 ms
Repeatability (RMS) below 4 µrad
Marking speed N/A
Positioning speed 27 rad/s
Gain drift below 50 ppm/K
Zero-point drift below 50 µrad/K
8-hour thermal drift (after 30 min warm-up) below 50 µrad
Electrical Parameters
Power supply 48 V DC / 10 A (20 A peak)
Input signal protocol SL2-100
Cooling method Water cooling + air cooling
Mechanical Parameters
Operating temperature 25 ± 10 °C
Dimensions (L × W × H) 475 × 283 × 305 mm
Weight 37 kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, directing the incoming laser beam to any position on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-rotation servo motor: when the driver board feeds control current into the motor coils, the electromagnetic torque rotates the rotor and mirror to the commanded angle, while a position sensor (analog position detector APD or digital encoder) continuously measures the rotor angle and compares it with the command to close the servo loop. A 3D scan head adds a Z-axis dynamic focusing module to the 2D scan head; moving a variable-focus lens (meniscus lens) back and forth changes the focal length so the laser focus can be shifted along Z, giving precise focusing at any point in three-dimensional space. In a pre-objective (front-focus) 3D scan head the Z axis sits ahead of the XY mirrors, so the beam is focused first and then deflected, allowing a larger working field and processing of curved surfaces. In a post-objective (rear-focus) 3D scan head the Z axis sits behind the XY mirrors, so the beam is deflected first and then focused, giving a more compact design that suits small-field, high-precision 3D processing. Scanning speed depends on the dynamic response of the motors; the tracking time (tracking error) describes how far the scan head lags the command signal and is a key indicator of high-speed performance.

Applications

3D Curved Surface Processing

Suitable for laser marking and precision processing of three-dimensional curved workpieces such as automotive interior parts, 3D glass for mobile phones and curved appliance panels. Z-axis dynamic focusing keeps the spot uniform across the whole curved surface.

Large-Format Processing

Z-axis compensation enables an extra-large working field (up to 600 × 600 mm and above), breaking the field limit of a conventional 2D scan head plus f-theta lens and suiting full-surface processing of large workpieces.

Deep Engraving

Pre-objective 3D scan heads are particularly advantageous in deep engraving: the Z axis follows the engraving depth in real time and adjusts the focus position, so processing quality is consistent at every depth level.

Laser Cutting

Combined with Z-axis dynamic focusing, high-quality cutting is possible on materials of different thickness, with a uniform kerf and little dross, which suits precision cutting applications.

3D Printing

Used for laser scanning in metal additive manufacturing (SLM/SLS): the Z axis precisely controls powder layer thickness and focus position so that every layer is sintered consistently.

Laser Marking

Adds curved-surface and height-variation marking to flat marking, covering shaped and stepped parts and allowing several faces to be processed in a single clamping.

Precision Micromachining

3D scan heads configured for UV wavelengths suit high-precision microstructure work such as microfluidic chips, biosensors and photonic crystals.

Selection Guide

When choosing a 3D scan head, first define the process. A post-objective (rear-focus) 3D scan head is compact and suits small-field, high-precision 3D work such as deep engraving and fine 3D marking; a pre-objective (front-focus) 3D scan head provides a larger working field and curved-surface processing, suiting large-format and shaped workpieces. Aperture choice depends on laser power and working field: 14-20 mm for low-power UV processing, 20-30 mm for medium- and high-power fiber lasers, and 40 mm and above for high-power CO₂ processing. The coating must match the laser wavelength: 355 nm UV suits precision micromachining, 1064 nm fiber lasers are the most widely used, and 10600 nm suits CO₂ laser processing.

Series Comparison

Model Clear Aperture Positioning Speed Repeatability Non-Linearity Max. Laser Power Cooling Reference Price
powerSCAN II 50i 50 mm 20 rad/s below 4 µrad below 2.1 mrad/44° 2500 W (CO₂) Water + air cooling On request
powerSCAN II 70i 70 mm 27 rad/s below 4 µrad below 2.1 mrad/44° 2500 W (CO₂) Water + air cooling On request

About the Brand

SCANLAB GmbH, headquartered in Munich, Germany, is a leading global manufacturer of laser scanning (galvo) systems and was founded in 1990. Its portfolio ranges from the entry-level basiCube to the flagship excelliSCAN, and is widely used in laser marking, welding, cutting, micromachining and additive manufacturing. With the innovative SCANahead control technology and dynAXIS series digitally encoded galvo motors, SCANLAB keeps leading the industry with outstanding accuracy, stability and dynamic performance.

Contact Us

For more product information, a quotation or technical consultation, please contact us:

📞 Hotline: +86 159-2722-0467

🌐 Website: www.soar-laser.cn  |  ✉️ Email: 859818709@qq.com

We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.

Reviews

There are no reviews yet.

Be the first to review “SCANLAB powerSCAN II 70i 2500 W CO₂ 3D Galvo Scanner, 70 mm Aperture”

Your email address will not be published. Required fields are marked *

中文EN