Description
Product Overview
The PF05-03-M02 is the mid-infrared enhanced gold mirror: a Ø12.7 mm fused silica disc, 6.0 mm thick, coated so that average reflectance stays above 98% from 2 µm to 20 µm at angles of incidence from 0° to 45°. Thorlabs quotes an average and an absolute figure together, R_avg above 98% with R_abs above 95%, and calls the protective overcoat out to MIL-C-48497A. Figure is better than λ/10 at 633 nm, polish is 40-20 scratch-dig, parallelism is inside 3 arcmin, and the clear aperture is quoted as Ø11.4 mm rather than as a percentage.
This coating is a different compromise from the protected gold on the PF05-03-M01, and the two are easy to confuse because both are gold on the same substrate at the same thickness. The -M01 covers 800 nm to 20 µm at 96%. The -M02 gives up the 800 nm to 2 µm region entirely and puts the gain into 2 µm to 20 µm, where it reaches 98%. Thorlabs states the mechanism plainly on its own page: the overcoat that improves performance beyond 2 µm causes performance to suffer in the near infrared. So the question is never which mirror is better, only which band the beam actually occupies.
The reflectance curves make the trade visible: the -M02 curve sits above the -M01 curve from 2 µm outward and below it in the near infrared, and Thorlabs publishes both so that the crossing can be read rather than guessed. What the overcoat buys in the thermal infrared is the ability to stay above 98% at 45° as well as at normal incidence, which matters in a folded instrument where every mirror is tilted.
One number deserves attention before the part is written into a mixed beam path. The pulsed rating at 1.064 µm is 0.1 J/cm² (10 ns, 10 Hz, Ø1.06 mm), a twentieth of the 2 J/cm² quoted for the -M01, and the CW rating at 1.070 µm is 25 W/cm against 500 W/cm. Those figures describe a coating being driven outside its design band. At 10.6 µm the same mirror is rated 3 J/cm² (100 ns, 1 Hz, Ø1.29 mm) and 450 W/cm CW. If a 1064 nm beam will touch this optic, size it on the 1.064 µm numbers and not on the 10.6 µm ones.
The applications Thorlabs names are the ones this coating was designed for: quantum cascade and interband cascade lasers, mid-infrared supercontinuum sources, and gas-sensing benches where the same coating is also deposited on the concave Herriott cell mirrors. In those systems the mirror is not a general-purpose fold but part of an absorption path, and two points of reflectance per bounce translate directly into path throughput over a dozen passes. The standard half-inch envelope applies: 12.7 mm diameter, +0.0 / -0.1 mm tolerance, 6.0 mm ± 0.2 mm thick, part number engraved on the back, with Ø7.0 mm, Ø19 mm, Ø1 inch and Ø2 inch rounds and three square sizes sharing the coating.
Key Features
- Mid-infrared enhanced gold: average reflectance above 98% and absolute reflectance above 95% from 2 µm to 20 µm
- Specified from 0° to 45° angle of incidence, so a 45° fold is inside the specification rather than outside it
- Protective overcoat to MIL-C-48497A, which is what makes the part robust inside a working instrument
- Figure and finish: better than λ/10 at 633 nm, 40-20 scratch-dig, parallelism inside 3 arcmin
- Clear aperture Ø11.4 mm, quoted as a diameter instead of a percentage of the substrate
- Ratings in the design band: 3 J/cm² at 10.6 µm for 100 ns pulses at 1 Hz, and 450 W/cm CW at 10.6 µm
- Much lower ratings in the near infrared: 0.1 J/cm² at 1.064 µm and 25 W/cm CW at 1.070 µm, which is the penalty for using this coating below 2 µm
- Engraved part number on the back; the same coating is sold from Ø7.0 mm to Ø2 inch and in three square sizes
Technical Specifications
| Parameter | Value |
|---|---|
| Model | PF05-03-M02 |
| Coating | Mid-infrared enhanced gold, dielectric overcoat |
| Wavelength range | 2 µm – 20 µm |
| Reflectance | R_avg above 98%, R_abs above 95% from 2 µm to 20 µm |
| Angle of incidence | 0° to 45° |
| Substrate | Fused silica |
| Diameter | 12.7 mm (Ø1/2 inch) |
| Diameter tolerance | +0.0 mm / -0.1 mm |
| Thickness | 6.0 mm (0.24 inch) |
| Thickness tolerance | ±0.2 mm |
| Clear aperture | Ø11.4 mm |
| Front surface flatness | better than λ/10 peak to valley at 633 nm |
| Surface quality | 40-20 scratch-dig |
| Parallelism | inside 3 arcmin |
| Overcoat specification | MIL-C-48497A |
| Damage threshold, pulsed | 0.1 J/cm² at 1.064 µm, 10 ns, 10 Hz, Ø1.06 mm; 3 J/cm² at 10.6 µm, 100 ns, 1 Hz, Ø1.29 mm |
| Damage threshold, CW | 25 W/cm at 1.070 µm, Ø1.04 mm; 450 W/cm at 10.6 µm, Ø1.18 mm |
| Source | Thorlabs official series specification table |
Applications
Mid-infrared instrumentation is where this coating earns its place. The cases below are the ones the specification sheet points at, plus the ones that come up in quotation requests.
- QCL and ICL gas analysers: the coating is specified where quantum cascade and interband cascade sources emit, and 98% per bounce keeps the loss accounting of a multi-pass cell workable
- Mid-infrared supercontinuum benches: a 2 µm to 20 µm continuum folded into a spectrometer or a sample chamber without a coating change part-way through the band
- Herriott and astigmatic multi-pass cells: Thorlabs deposits the same coating on the concave cell mirrors, so plano and concave parts inside one cell match
- FTIR sample compartments: a 45° fold that stays above 98% even when the mirror is tilted to steer the beam through a purge box
- Laser absorption spectroscopy from 3 µm to 10 µm: where twelve bounces at 96% would lose noticeably more signal than twelve bounces at 98%
Selection Guide
The three gold coatings on the 12.7 mm substrate differ in exactly two things: the band and whether there is an overcoat. That is the whole decision.
| Part number | Coating | Band | Average reflectance | Overcoat |
|---|---|---|---|---|
| PF05-03-M01 | Protected gold | 800 nm – 20 µm | over 96% | Dielectric, cleanable |
| PF05-03-M02 | MIR enhanced gold | 2 µm – 20 µm | over 98% | Dielectric, to MIL-C-48497A |
| PF05-03-M03 | Unprotected gold | 800 nm – 20 µm | over 97% | None |
The judgement: if any part of the path falls between 800 nm and 2 µm, an alignment laser, a pump arm or a 1.5 µm seed, the PF05-03-M01 is the correct part and this one will lose both reflectance and damage threshold there. If the beam is entirely beyond 2 µm and reflectance per bounce matters, this coating is two points better and is the one to specify. If the reason for avoiding a dielectric layer is dispersion or polarization rather than reflectance, the PF05-03-M03 is the alternative. In the smaller 7.0 mm aperture the same choice exists between the Ø7.0 mm protected gold and the Ø7.0 mm mid-infrared enhanced gold. For a multi-mirror build, the 10-piece pack is the same optic in a purchasing quantity.
FAQ
Can I use the PF05-03-M02 at 1064 nm? It will reflect, but it is outside the specified band and Thorlabs states that near-infrared performance suffers with this overcoat. The ratings fall to 0.1 J/cm² and 25 W/cm CW at 1.06 µm to 1.07 µm. If a 1064 nm beam shares the path, use the PF05-03-M01 or a dielectric mirror.
What do R_avg 98% and R_abs 95% mean when quoted together? They describe the mean and the worst case. The average over 2 µm to 20 µm is above 98%, and no point inside the band falls below 95%. A multi-bounce cell should be designed on the second number, because losses multiply.
Is this the right mirror for a 45° fold? Yes. The coating is specified from 0° to 45° angle of incidence, so a 45° mount is inside the specification rather than at its edge.
Do you supply the concave version for a Herriott cell? Thorlabs deposits this coating on its Herriott cell concave mirrors as well. Send us the cell length, the number of passes and the mirror diameter and we will quote the matching concave parts with the plano mirrors.
For a 4 µm quantum cascade laser, is the unprotected gold better? The PF05-03-M03 is one point higher in average reflectance, but it has no overcoat and cannot be cleaned or touched. Inside an instrument that is assembled once, either works; on a bench that gets serviced, the protected overcoat here is the safer specification.
Disclaimer
Values on this page are taken from the Thorlabs mid-infrared enhanced gold specification table and are published as guidance for selection. Where the official datasheet and this page differ, the datasheet in force at the time of order applies, and Thorlabs may change specifications without notice. Quotations, availability and delivery dates are always confirmed against live stock by our sales team.
Contact Us
Changsha Soar Laser Equipment Co., Ltd. supplies genuine Thorlabs optics to laboratories and instrument builders in China. Mid-infrared coating choice turns on the exact band, so send the source spectrum, the angle of incidence and the number of bounces, and we will confirm whether the 2 µm to 20 µm window of this coating really covers the beam or whether the protected gold PF05-03-M01 is the safer specification. Hotline +86 159 2722 0467, email 859818709@qq.com, website www.soar-laser.cn. Herriott cell concave mirrors in the same coating can be quoted alongside the plano parts.









Reviews
There are no reviews yet.