QQ: 859818709

RayTools VBA AI Vision Beam Alignment Instrument, Automatic Spot Centering for Cutting Heads

RayTools VBA AI Vision Beam Alignment Instrument, Automatic Spot Centering for Cutting Heads

Price on request
Category:

Description

Product Overview

The VBA AI Vision edition replaces the operator’s eye with a camera and an algorithm. A camera images the focused spot, the software determines where that spot sits relative to the nozzle bore, and the centering adjustment is driven until the two line up. Nothing depends on how steady a hand is on a set screw, so the outcome repeats from shift to shift and from operator to operator.

Spot centering is the precondition for an even kerf on all four sides. When the spot sits off centre the kerf widens on one side, cut quality drifts and thick-section work shows the problem first. Because the measurement is automatic, the check that used to be skipped between jobs becomes a single pass, and that is where most of the saved time comes from. The instrument is built for RayTools series cutting heads and the vision algorithm runs locally on the device.

Key Features

  • AI vision measurement: a camera images the focused spot and the software locates it, instead of an operator judging it by eye
  • Automatic centering: the correction is computed and driven by the instrument, so the manual set-screw procedure is no longer the operator’s task
  • Repeatable result: the same measurement decides every time, which keeps alignment identical across shifts and across operators
  • Short alignment time: a single automatic pass replaces repeated trial cuts and visual checking after a head change or a lens clean
  • RayTools series compatibility: intended for RayTools series cutting heads, so one instrument covers a mixed head population on the same floor

Technical Specifications

Parameter Specification
Brand Empower / RayTools
Model VBA (AI Vision edition)
Type AI vision beam alignment instrument
Centering precision High precision visual positioning, as stated by the manufacturer
Compatible cutting heads RayTools series cutting heads

Technical Notes

The manufacturer documentation for this model does not publish a numerical centering tolerance, an aperture figure, an input power rating or an interface list, and no such values are stated on this page. If a specific figure is required for a tender document or an acceptance protocol, ask us and we will request it from the factory rather than quote an estimate.

Applications

Automatic beam centering on cutting heads; fast alignment after a head change on a production line; holding cut quality consistent across shifts. The same procedure also covers comparable alignment work on machines of a similar class, and non-standard fixtures or multi-machine deployment can be discussed against drawings or process requirements.

Selection Guide

  • Spot centering governs four-side kerf symmetry. After a head change, after cleaning or replacing a lens, or as soon as one side of the kerf looks different from the others, re-center before touching process parameters.
  • This edition centers automatically and works offline. Where remote commissioning, state monitoring or multi-machine management is wanted, the WIFI edition of the same instrument is the correct choice rather than an add-on to this one.
  • The VBA family differs in centering method, not in power or aperture: the mechanical version assists a manual procedure, this AI Vision edition performs the procedure, and the WIFI edition performs it across a network. Select by how the plant is run, not by a specification table.
  • Supplied as genuine factory stock with a packing list and warranty certificate. Warranty and spare-part support run from the date of receipt as agreed; wear items such as lenses and seals are excluded.
  • Other RayTools head series and focal lengths can be quoted on request. Send the head model and the machine’s control type and we will return a like-for-like comparison.

Usage Precautions

  • Center only with the source off, or fully attenuated behind an interlocked shutter, because the nozzle area has to be opened to the camera. Where the machine cannot be interlocked, mark the zone, fit screening and wear eyewear rated for the wavelength in use.
  • The instrument is a precision optical assembly. Return it to its protective case after use and keep the camera window free of dust, because contamination is read as a wrong spot position rather than as a dirty lens.
  • Carry out alignment only with the source in the safe state defined by the machine builder’s procedure, and never reach into the head while the laser is enabled.
  • Wiring changes on the machine belong to a qualified electrician working under lockout and tagout; the head and the instrument share an earth, so a poor earth shows up as unstable readings before it shows up as a fault.
  • Store and transport the instrument dry and dust-free. If the machine stands idle for a long period, isolate it, disconnect power and cover it against dust.
  • On arrival, check the model plate and the accessories against the packing list before installation. Changsha Soar Laser supports commissioning by remote or on-site arrangement on +86 159 2722 0467.

FAQ

How does this differ from the mechanical VBA nozzle centering tool?
They are two separate products that happen to share the VBA name. The mechanical tool is a passive aid: the operator looks at the spot on a target and turns the adjustment by hand until it appears centred. The AI Vision edition measures the spot with a camera, decides the correction itself and drives it, so the result does not depend on the operator’s eye or patience.

How often should the head be re-centred?
Once after anything that can move the optical axis: a head swap, replacement of a lens or protective window, or a crash. Between those events a periodic self-check on a running line is sufficient.

Does it need a network connection?
No. The vision algorithm runs locally on the instrument, so centering is available on a machine that has no network at all. Network capability is what the WIFI edition adds, and it is a different model.

Disclaimer

Specifications on this page are compiled from the manufacturer’s published material and the documentation available to us, and are provided as a selection reference only. The delivered product, the factory inspection report and the manufacturer’s latest specification sheet take precedence; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is not permitted.

Contact Us

Changsha Soar Laser Equipment Co., Ltd.  |  Hotline +86 159 2722 0467  |  www.soar-laser.cn  |  859818709@qq.com

Reviews

There are no reviews yet.

Be the first to review “RayTools VBA AI Vision Beam Alignment Instrument, Automatic Spot Centering for Cutting Heads”

Your email address will not be published. Required fields are marked *

中文EN