QQ: 859818709

ZBTK 14AW-III-Pro 14 mm High-Precision Galvo Scanner, 500 W, Water Cooling Option

ZBTK 14AW-III-Pro 14 mm High-Precision Galvo Scanner, 500 W, Water Cooling Option

Price on request
Category:

Description

Product Overview

The ZBTK 14AW-III-Pro high-precision laser scanning galvo is a high-precision scanning galvo from Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK). The clear aperture is 14 mm, the scan angle ±0.35 rad, repeatability under 2 μrad and non-linearity under 0.4 mrad; marking speed is under 2 m/s and positioning speed under 8 m/s. It is widely used in laser marking, welding, cutting and other industrial applications.

Key Features

⚡ High-Speed Scanning Performance

Marking speed reaches up to 2 m/s and positioning speed 8 m/s, with a tracking error of only 0.20 ms. The optimised servo control algorithm guarantees smooth switching between high-speed jumps and low-speed marking, and the small-step response time is short, so marking quality stays high even during fast jump-and-mark cycles.

🎯 High-Precision Positioning

Repeatability (RMS) is under 2 μrad and non-linearity under 0.4 mrad, with gain drift under 40 ppm/K, zero drift under 20 μrad/K and 8-hour drift under 0.08 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation keep positioning stability and process consistency excellent through long continuous runs.

🌡️ Ultra-Low Thermal Drift

Refined photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm overcome the temperature drift problem of galvo scanners. Zero temperature drift is only under 20 μrad/K, gain temperature drift under 40 ppm/K and 8-hour long-term drift under 0.08 mrad, satisfying the stability requirements of most long-duration, high-volume marking and welding applications. Process quality stays consistent even when ambient temperature swings by ±10 °C.

🔧 High-Torque Permanent-Magnet Galvo Motor

The module uses a high-torque permanent-magnet galvo motor with high-energy-density magnets and low-friction precision bearings, giving a high torque constant and low rotor inertia. It delivers excellent dynamic response while maintaining scan accuracy, and holds a stable output through long continuous operation.

📡 High-Precision Analog/Digital Servo Driver Board

A ZBTK high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit, its core components are sourced from first-tier international brands, and every board is burned in for 360 hours before leaving the factory, so it keeps running reliably even in harsh electromagnetic environments.

🔌 Interface Compatibility

The scanner supports the XY2-100 standard communication protocol and is compatible with the vast majority of laser control cards on the market, such as the JCZ EZCAD series, the SCANLAB RTC series and the RAYLASE SP-ICE series. Plug-and-play, it integrates quickly and efficiently into existing systems. Power requirement is ±15 V / 5 A, and the interface cabling is shielded to suppress external electromagnetic interference.

❄️ Efficient Cooling System

Air cooling or water cooling can be selected. The water circuit covers the core heat zones such as the galvo mirror mount and the entrance aperture, effectively controlling mirror temperature rise and preventing spot drift and focus shift caused by thermal lensing. Under high-power, long-duration continuous operation the water cooling loop keeps the scanner at its optimum working temperature and maintains consistent process quality.

🛡️ High-Reliability Design

ZBTK specifies first-tier international brands for all core components, and every scanner is burned in for 360 hours before shipping, so it runs reliably over the long term even under extreme conditions. The design also uses multi-stage, high-immunity protection array circuits for excellent interference resistance.

Detailed Specifications

Optical Parameters
Clear Aperture 14 mm
Scan Angle ±0.35 rad
Max Laser Power 500 W
Mirror Coating Wavelength 532 nm / 1064 nm / 10600 nm
Scanning Parameters
Non-linearity under 0.4 mrad
Tracking Time 0.20 ms
Repeatability (RMS) under 2 μrad
Marking Speed under 2 m/s
Positioning Speed under 8 m/s
Gain Drift under 40 ppm/K
Zero Drift under 20 μrad/K
8-Hour Drift (after 30-min warm-up) under 0.08 mrad
Electrical Parameters
Power Supply ±15 V / 5 A
Input Signal Protocol XY2-100
Cooling Air cooled / water cooled (optional)
Mechanical Parameters
Operating Temperature 25 ± 10 °C
Dimensions (L × W × H) 133 × 110 × 108 mm
Weight 2.2 kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors independently, steering the incoming laser beam to any point on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coil, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (analog position detector, APD, or digital encoder) measures the rotor angle in real time and closes the servo loop against the commanded position. Scan speed depends on the dynamic response of the motor, and tracking time characterises how far the scanner lags the command signal, which makes it the key metric for high-speed performance.

Applications

Laser Marking

Suitable for text, patterns, 2D codes and serial numbers on metal and non-metal surfaces, with high marking accuracy, high speed and durable results. Widely used in electronic components, hardware tools, medical devices and other industries.

Laser Welding

Used for precision welding such as lap welding of thin sheets and spot welding, with a small heat-affected zone and little distortion, making it well suited to precision components.

Laser Cutting

Combined with a laser of appropriate power, it delivers precision cutting of thin metal and non-metal materials with a narrow kerf, high speed and good edge quality.

3D Printing / Additive Manufacturing

Used for laser scanning in SLM/SLS metal additive manufacturing, precisely controlling laser energy distribution and scan paths to ensure the sintering quality of every layer.

Precision Micro-Machining

Suitable for precision micro-structure processing in semiconductors, microelectronics and photonics, such as micro-hole drilling, micro-channel etching and thin-film patterning.

Laser Cleaning

Combined with a high-power pulsed laser, it selectively removes oxide layers, coatings and contamination from metal surfaces without damaging the substrate.

Research and Education

Suitable for laser processing research in universities and research institutes, and a common experimental tool in optical engineering, materials science and advanced manufacturing.

Selection Guide

When choosing a scanning galvo, first match the clear aperture to laser power: choose 8–10 mm below 100 W, 10–14 mm for 100–500 W and 20–30 mm above 500 W. Next, choose the grade by accuracy requirement: the economy 10C covers about 90% of routine marking jobs; the high-precision 14AW-III-Pro suits precision marking and welding; digital closed-loop models (FB2 series) offer the highest accuracy and long-term stability for 7×24 continuous production. Scan speed and dynamic performance depend on the application: marking is judged mainly on marking speed and writing speed, while welding is judged on welding speed and tracking error.

Series Comparison

Model Clear Aperture Marking Speed Positioning Speed Repeatability Non-linearity 8 h Drift Reference Price
8AH 8 mm under 1.5 m/s under 8 m/s under 2 μrad under 0.5 mrad under 0.1 mrad On request
8AH-Max 8 mm under 2 m/s under 10 m/s under 2 μrad under 0.5 mrad under 0.1 mrad On request
10C 10 mm under 2 m/s under 7 m/s under 5 μrad under 0.8 mrad under 0.2 mrad On request
10D 10 mm under 2 m/s under 10 m/s under 2 μrad under 0.5 mrad under 0.15 mrad On request
14AW-III-Pro 14 mm under 2 m/s under 8 m/s under 2 μrad under 0.4 mrad under 0.08 mrad On request

About the Brand

Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of galvo development and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, and is widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for cost-effectiveness and stability, can replace comparable imported products, and enjoy a solid reputation in China’s laser industry.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

🌐 Website: www.soar-laser.cn

We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.

Reviews

There are no reviews yet.

Be the first to review “ZBTK 14AW-III-Pro 14 mm High-Precision Galvo Scanner, 500 W, Water Cooling Option”

Your email address will not be published. Required fields are marked *

中文EN