Description
Product Overview
The ZBTK 14AW-III-Pro-SQU precision laser welding galvo system is a precision welding galvo system from Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK). The clear aperture is 14 mm and the unit is optimised for laser welding applications, with maximum laser power up to 1500 W and water cooling that keeps long high-power runs stable and reliable. Welding speed reaches up to 2 m/s, and with collimating lenses (F80/F100) and focusing lenses (F210/F254/F330) a wide range of seam forms can be processed flexibly.
Key Features
⚡ High-Speed Welding Scanning
Welding scan speed reaches up to 2 m/s and positioning speed 8 m/s, with a tracking error of only 0.22 ms. The optimised servo control algorithm keeps trajectory accuracy very high even during high-speed oscillating welding, so seam uniformity and consistency are far better than with conventional robotic-arm welding. High-speed jumps and transition delays are minimal, which shortens cycle time and raises line throughput. Stable, reliable high-speed processing is achieved for both continuous seam and spot welding processes.
🎯 High-Precision Positioning
Repeatability (RMS) is under 2 μrad and non-linearity under 0.4 mrad, with gain drift under 40 ppm/K, zero drift under 20 μrad/K and 8-hour drift under 0.08 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation keep positioning stability and process consistency excellent during long, uninterrupted operation.
🌡️ Ultra-Low Thermal Drift
Fine photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm effectively overcome the thermal drift of the scanner. Zero-point thermal drift is only under 20 μrad/K, gain thermal drift under 40 ppm/K and 8-hour long-term drift under 0.08 mrad, which meets the stability requirements of most long, high-volume marking and welding applications. Process consistency is maintained even with ambient temperature swings of ±10 °C.
🔧 High-Torque Permanent-Magnet Galvo Motor
A ZBTK high-torque galvo motor dedicated to welding is used, with rotor inertia and torque constant matched by design so that even with the load of the 14 mm aperture mirror it still achieves a 0.22 ms fast tracking response and 2 m/s welding speed. The motor uses a high-temperature design and an efficient heat-dissipation structure, so performance does not degrade over long high-power runs.
📡 High-Precision Analog / Digital Servo Driver Board
The ZBTK high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit, with first-tier international brand components, and every unit is burned in for 360 hours before shipment so that it keeps running reliably in harsh electromagnetic environments.
🔌 Interface Compatibility
The system supports the XY2-100 standard communication protocol and is compatible with most laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series), for plug-and-play use and efficient system integration. Power supply: ±15 V / 5 A; shielded interface cables effectively suppress external electromagnetic interference.
❄️ Efficient Cooling
This product is water cooled. The water circuit covers the galvo mirror mount and the entrance aperture and other core hot zones, controlling mirror temperature rise and preventing spot drift and focus shift caused by thermal lensing. Under high-power, long-duration continuous operation the water cooling keeps the scanner at its optimum working temperature and preserves process consistency.
🛡️ Intelligent Monitoring and Protection
The welding galvo system carries a complete fault monitoring and alarm system that detects abnormal power supply, motor faults, driver board faults, cable connection faults, core-zone temperature faults and protective window faults in real time. The system can actively cut the laser circuit and notify the welding control card to stop, preventing defective parts from reaching downstream processes and safeguarding production.
Detailed Specifications
| Optical Parameters | |
|---|---|
| Clear Aperture | 14 mm |
| Scan Angle | ±0.35 rad |
| Max Laser Power | 1500 W |
| Mirror Reflection Wavelength | 1030~1090 nm |
| Collimating Lens | F80/F100 |
| Focusing Lens | F210/F254/F330 |
| Scanning Parameters | |
|---|---|
| Non-linearity | under 0.4 mrad |
| Tracking Time | 0.22 ms |
| Repeatability (RMS) | under 2 μrad |
| Welding Speed | under 2 m/s |
| Positioning Speed | under 8 m/s |
| Gain Drift | under 40 ppm/K |
| Zero Drift | under 20 μrad/K |
| 8-Hour Drift (after 30-min warm-up) | under 0.08 mrad |
| Electrical Parameters | |
|---|---|
| Power Supply | ±15 V / 5 A |
| Input Signal Protocol | XY2-100 |
| Cooling | Water cooled |
| Mechanical Parameters | |
|---|---|
| Operating Temperature | 25 ± 10 °C |
| Dimensions (L × W × H) | 133 × 110 × 108 mm |
| Weight | 2.5 kg |
Operating Principle
A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors independently, steering the incoming laser beam to any point on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coil, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (an analog position detector, APD, or a digital encoder) measures the rotor angle in real time and the servo loop closes against the commanded position. Scan speed depends on the dynamic response of the motor; tracking time (tracking error) describes how far the scanner lags the command signal and is the key figure of merit for high-speed performance.
Applications
Laser Welding
Suitable for precision welding of stainless steel, carbon steel, aluminium alloy, copper alloy and other metals, covering spot welding, seam welding, butt welding and lap welding. The seams are clean and well formed, the heat-affected zone is small and the welding speed is high.
New Energy Vehicles
Used for welding traction battery cells, battery module busbars, motor stators and other core new-energy-vehicle components, meeting high safety and high consistency requirements.
3C Electronics
Suitable for welding phone mid-frames, notebook housings, connectors and other precision electronic parts, with fine weld spots and little distortion to meet miniaturised processing needs.
Aerospace
Used for repair welding of aero-engine blades, welding of titanium alloy structural parts and other high-end applications, with reliable weld quality that meets demanding industry standards.
Medical Devices
Suitable for welding medical catheters, stents and surgical instruments, with high seam cleanliness that meets medical-grade quality requirements.
Hardware Products
Used for automated welding of kitchen and bathroom hardware, locks, valves and similar products, with high efficiency and good consistency that significantly reduce labour cost.
Power and Electrical
Suitable for welding transformer copper busbars, switchgear busbars and electrical contacts, with good conductivity and low contact resistance.
Selection Guide
When choosing a welding galvo, first size the clear aperture from the laser power: up to 1500 W a 14 mm aperture is sufficient, 1500-3000 W calls for a 20-30 mm aperture, and above 3000 W an aperture of 33 mm or more is required. Then pick the model from the welding speed requirement: the 30G standard series for general welding, the 30BS high-speed series for fast welding, and the 30G-FB2 digital closed-loop series where high repeatability and low drift are essential. For ultra-high-power welding above 6000 W the LHP33-FB2 is the first choice. A welding galvo must be water cooled, and the f-theta focal length should be chosen from the required seam width together with the working distance.
Series Comparison
| Model | Clear Aperture | Max Power | Welding Speed | Repeatability | Control Mode | Cooling | Reference Price |
|---|---|---|---|---|---|---|---|
| 14AW-III-Pro-SQU | 14 mm | 1500 W | under 2 m/s | under 2 μrad | Open loop | Water cooled | On request |
| S20GW-Pro-QU | 20 mm | 2000 W | under 2.5 m/s | under 2 μrad | Open loop | Water cooled | On request |
| 30G | 30 mm | 4000 W | under 2.5 m/s | under 2 μrad | Open loop | Water cooled | On request |
| 30BS | 30 mm | 3000 W | under 3 m/s | under 2 μrad | Open loop | Water cooled | On request |
| 30G-FB2 | 30 mm | 4000 W | under 2.5 m/s | under 1 μrad | Digital closed loop | Water cooled | On request |
| 30GH-SYS | 30 mm | 4000 W | under 2.5 m/s | under 2 μrad | Open loop | Water cooled | On request |
| 30GH-FB2-SYS | 30 mm | 3000 W | under 3 m/s | under 1 μrad | Digital closed loop | Water cooled | On request |
| LHP33-FB2-SYS | 33 mm | 12000 W | under 2 m/s | under 1 μrad | Digital closed loop | Water cooled | On request |
About the Brand
Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of galvo development and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, and the products are widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for cost-effectiveness and stability, can replace comparable imported products, and enjoy a solid reputation in the Chinese laser industry.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
🌐 Website: www.soar-laser.cn
We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.





Reviews
There are no reviews yet.