Description
Product Overview
The ZBTK 30GH-FB2-SYS is a 30 mm digital closed-loop, water-cooled high-power welding galvo scanner from ZBTK (Shenzhen ZBTK Technology Co., Ltd.). Its 30 mm clear aperture is optimised for laser welding and handles laser power up to 3000 W, while water cooling keeps it stable and reliable through long high-power runs. Digital closed-loop control with high-precision encoder feedback delivers sub-microradian positioning accuracy and very low thermal drift, meeting the demanding seam-position accuracy and repeatability of precision welding. Welding speed reaches 3 m/s, and with F100/F120/F150 collimating lenses and F210/F254/F330/F420 focusing lenses a wide range of seam types can be processed flexibly.
Key Features
⚡ High-Speed Welding Scanning
Welding scan speed reaches 3 m/s, positioning speed is 10 m/s and tracking error is only 0.40 ms. The optimised servo control algorithm keeps trajectory accuracy extremely high even during high-speed oscillating welding, so bead uniformity and consistency are far better than with conventional robot-arm welding. Fast jumps and minimal transition delay shorten the process cycle and raise line throughput. Both continuous seams and spot welds are processed stably and at speed.
🎯 High-Precision Positioning
Repeatability (RMS) is under 1 μrad and non-linearity under 0.3 mrad. A high-resolution digital encoder provides position feedback, and closed-loop control removes the drift and hysteresis inherent in open-loop systems: gain drift under 15 ppm/K, zero drift under 10 μrad/K and 8-hour thermal drift under 0.03 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation maintain outstanding positioning stability and process consistency through long continuous operation.
🌡️ Ultra-Low Thermal Drift
Fine optoelectronic sensor technology and an advanced automatic thermal-drift compensation algorithm overcome the drift problem of galvo scanners. Zero thermal drift is only under 10 μrad/K, gain thermal drift under 15 ppm/K and 8-hour long-term drift under 0.03 mrad, which meets the stability requirements of the vast majority of long, large-scale marking and welding applications. Process quality stays consistent even when the ambient temperature swings ±10°C.
🔧 High-Torque Permanent-Magnet Galvo Motor
A ZBTK high-torque motor dedicated to welding is used, with rotor inertia and torque constant optimised as a matched pair, so the 0.40 ms fast tracking response and 3 m/s welding speed are still achieved under the load of a 30 mm large-aperture mirror. The motor uses a high-temperature design and an efficient heat-dissipation structure, so performance does not degrade during long high-power operation.
📡 Digital Servo Driver Board
An FB2 digital closed-loop servo driver board is used, with a built-in high-speed DSP processor and high-resolution A/D conversion for real-time encoder sampling and closed-loop servo regulation. The board supports multiple protection functions, including over-current protection, over-temperature protection and position-deviation alarms, keeping the galvo system safe and reliable under all operating conditions.
🔌 Interface Compatibility
The product supports the XY2-100 / SL2-100 standard communication protocols. SL2-100 provides 20-bit digital resolution (0.76 μrad) and XY2-100 provides 16-bit resolution (12 μrad), making the head compatible with the vast majority of laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series) for plug-and-play, efficient system integration. Power requirement is ±15 V / 5 A, and the interface cable is shielded to suppress external electromagnetic interference.
❄️ Efficient Cooling System
Water cooling is used, with the cooling circuit covering the core hot zones of the galvo housing and the entrance aperture, controlling mirror temperature rise and preventing spot drift and focus shift caused by the thermal lens effect. Under high-power, long-duration continuous operation the water-cooling system keeps the galvo at its optimum working temperature and holds process quality consistent.
🛡️ Intelligent Monitoring and Protection
The welding galvo system has a comprehensive fault-monitoring and alarm system that detects galvo power supply faults, motor faults, driver board faults, cable connection faults, core-zone temperature faults, protective-window faults and other abnormal states in real time. The system can actively cut the laser circuit and notify the welding control card to stop the process, preventing defective parts from reaching downstream stations and safeguarding production. The digital closed-loop version also supports encoder signal readback and position-deviation monitoring, further improving system reliability and maintainability.
Detailed Specifications
| Optical Parameters | |
|---|---|
| Clear Aperture | 30mm |
| Scan Angle | ±0.35 rad |
| Max. Laser Power | 3000W |
| Mirror Reflection Wavelength | 1030~1090nm |
| Collimating Lens | F100/F120/F150 |
| Focusing Lens | F210/F254/F330/F420 |
| Scanning Parameters | |
|---|---|
| Non-linearity | under 0.3 mrad |
| Tracking Time | 0.40ms |
| Repeatability (RMS) | under 1 μrad |
| Marking Speed | under 3 m/s |
| Positioning Speed | under 10 m/s |
| Gain Drift | under 15 ppm/K |
| Zero Drift | under 10 μrad/K |
| 8-Hour Thermal Drift (after 30-min warm-up) | under 0.03 mrad |
| Electrical Parameters | |
|---|---|
| Power Supply | ±15V/5A |
| Input Signal Protocol | XY2-100/SL2-100 |
| Cooling Method | Water-cooled |
| Mechanical Parameters | |
|---|---|
| Operating Temperature | 25±10°C |
| Dimensions (L×W×H) | 195×150×171mm |
| Weight | 6.0kg |
Operating Principle
A laser galvo scanning system is a high-precision beam-positioning device based on the principle of electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, steering the incoming laser beam to any position on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coils, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (an analogue position detector, APD, or a digital encoder) reads the rotor angle in real time and compares it with the commanded position to close the servo loop. A digital closed-loop galvo replaces the conventional analogue position detector with a high-resolution encoder that reads the rotor angle directly and feeds it back to the digital servo driver board, forming fully digital closed-loop control. This fundamentally removes the noise, drift and hysteresis of analogue detectors, delivering sub-microradian positioning accuracy and long-term stability. Scanning speed depends on the dynamic response of the motor; tracking time (tracking error) describes how far the galvo lags the command signal and is the key indicator of high-speed performance.
Applications
Laser Welding
Suited to precision welding of stainless steel, carbon steel, aluminium alloy, copper alloy and other metals. Spot welding, seam welding, butt welding and lap welding are all supported, with clean bead formation, a small heat-affected zone and high welding speed.
New Energy Vehicles
Used for welding power-battery cells, battery-module busbars and motor stators, and for other core new-energy vehicle components where high safety and high consistency are mandatory.
3C Electronics
Suited to welding phone mid-frames, laptop housings and connectors, and other precision electronic parts. Weld spots are fine and distortion is small, meeting the demands of miniaturised manufacturing.
Aerospace
Used for repair welding of aero-engine blades, welding of titanium alloy structural parts and other high-end applications, with reliable weld quality that meets stringent industry standards.
Medical Devices
Suited to welding medical catheters, stents and surgical instruments, with high weld cleanliness that meets medical-grade quality requirements.
Hardware Products
Used for automated welding of kitchen and bathroom hardware, locks, valves and similar products, with high welding efficiency and good consistency that significantly reduce labour cost.
Power and Electrical
Suited to welding transformer copper busbars, switchgear cabinet busbars and electrical contacts, with good conductivity and low contact resistance.
Selection Guide
When choosing a welding galvo, first size the clear aperture to the laser power: below 1500 W a 14 mm aperture is enough, 1500-3000 W calls for a 20-30 mm aperture, and above 3000 W a large aperture of 33 mm or more is needed. Then pick the model by welding speed requirement: the 30G standard series for conventional welding, the 30BS high-speed series for fast welding, and the 30G-FB2 digital closed-loop series where high repeatability and low drift are required for precision welding. For ultra-high-power welding (above 6000 W), the LHP33-FB2 is the first choice. A welding galvo must be water-cooled, and the field-lens focal length should be chosen from the required seam width and working distance together.
Series Comparison
| Model | Clear Aperture | Max. Power | Welding Speed | Repeatability | Control Mode | Cooling | Reference Price |
|---|---|---|---|---|---|---|---|
| 14AW-III-Pro-SQU | 14mm | 1500W | under 2 m/s | under 2 μrad | Open loop | Water-cooled | On request |
| S20GW-Pro-QU | 20mm | 2000W | under 2.5 m/s | under 2 μrad | Open loop | Water-cooled | On request |
| 30G | 30mm | 4000W | under 2.5 m/s | under 2 μrad | Open loop | Water-cooled | On request |
| 30BS | 30mm | 3000W | under 3 m/s | under 2 μrad | Open loop | Water-cooled | On request |
| 30G-FB2 | 30mm | 4000W | under 2.5 m/s | under 1 μrad | Digital closed-loop | Water-cooled | On request |
| 30GH-SYS | 30mm | 4000W | under 2.5 m/s | under 2 μrad | Open loop | Water-cooled | On request |
| 30GH-FB2-SYS | 30mm | 3000W | under 3 m/s | under 1 μrad | Digital closed-loop | Water-cooled | On request |
| LHP33-FB2-SYS | 33mm | 12000W | under 2 m/s | under 1 μrad | Digital closed-loop | Water-cooled | On request |
About the Brand
ZBTK (Shenzhen ZBTK Technology Co., Ltd.) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of R&D and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK galvos are known for cost-effectiveness and high stability, can replace comparable imported products, and enjoy a strong reputation in the Chinese laser industry.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
We provide professional galvo scanner selection advice and complete system integration, and we welcome your call.





Reviews
There are no reviews yet.