QQ: 859818709

ZBTK 30GH-SYS 30 mm General-Purpose Welding Galvo Kit, 4000 W, Water-Cooled

ZBTK 30GH-SYS 30 mm General-Purpose Welding Galvo Kit, 4000 W, Water-Cooled

Price on request
Category:

Description

Product Overview

The ZBTK 30GH-SYS is a 30 mm general-purpose welding galvo kit from ZBTK (Shenzhen ZBTK Technology Co., Ltd.). Its 30 mm clear aperture is optimised for laser welding and handles laser power up to 4000 W, while water cooling keeps it stable and reliable through long high-power runs. Welding speed reaches 2.5 m/s, and with F100/F120/F150 collimating lenses and F210/F254/F330/F420 focusing lenses a wide range of seam types can be processed flexibly.

Key Features

⚡ High-Speed Welding Scanning

Welding scan speed reaches 2.5 m/s, positioning speed is 8 m/s and tracking error is only 0.50 ms. The optimised servo control algorithm keeps trajectory accuracy extremely high even during high-speed oscillating welding, so bead uniformity and consistency are far better than with conventional robot-arm welding. Fast jumps and minimal transition delay shorten the process cycle and raise line throughput. Both continuous seams and spot welds are processed stably and at speed.

🎯 High-Precision Positioning

Repeatability (RMS) is under 2 μrad, non-linearity under 0.5 mrad, gain drift under 30 ppm/K, zero drift under 20 μrad/K and 8-hour thermal drift under 0.05 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation maintain outstanding positioning stability and process consistency through long continuous operation.

🌡️ Ultra-Low Thermal Drift

Fine optoelectronic sensor technology and an advanced automatic thermal-drift compensation algorithm overcome the drift problem of galvo scanners. Zero thermal drift is only under 20 μrad/K, gain thermal drift under 30 ppm/K and 8-hour long-term drift under 0.05 mrad, which meets the stability requirements of the vast majority of long, large-scale marking and welding applications. Process quality stays consistent even when the ambient temperature swings ±10°C.

🔧 High-Torque Permanent-Magnet Galvo Motor

A ZBTK high-torque motor dedicated to welding is used, with rotor inertia and torque constant optimised as a matched pair, so the 0.50 ms fast tracking response and 2.5 m/s welding speed are still achieved under the load of a 30 mm large-aperture mirror. The motor uses a high-temperature design and an efficient heat-dissipation structure, so performance does not degrade during long high-power operation.

📡 High-Precision Analogue / Digital Servo Driver Board

A ZBTK high-performance servo driver board is used, with a high-speed PWM output stage and precision position detection. The board uses a multi-stage anti-interference protection array circuit, its core components are sourced from leading international brands, and every unit is aged for 360 hours before shipment, so it keeps running reliably over the long term even in harsh electromagnetic environments.

🔌 Interface Compatibility

The product supports the XY2-100 standard communication protocol and is compatible with the vast majority of laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series) for plug-and-play, efficient system integration. Power requirement is ±15 V / 5 A, and the interface cable is shielded to suppress external electromagnetic interference.

❄️ Efficient Cooling System

Water cooling is used, with the cooling circuit covering the core hot zones of the galvo housing and the entrance aperture, controlling mirror temperature rise and preventing spot drift and focus shift caused by the thermal lens effect. Under high-power, long-duration continuous operation the water-cooling system keeps the galvo at its optimum working temperature and holds process quality consistent.

🛡️ Intelligent Monitoring and Protection

The welding galvo system has a comprehensive fault-monitoring and alarm system that detects galvo power supply faults, motor faults, driver board faults, cable connection faults, core-zone temperature faults, protective-window faults and other abnormal states in real time. The system can actively cut the laser circuit and notify the welding control card to stop the process, preventing defective parts from reaching downstream stations and safeguarding production.

Detailed Specifications

Optical Parameters
Clear Aperture 30mm
Scan Angle ±0.35 rad
Max. Laser Power 4000W
Mirror Reflection Wavelength 1030~1090nm
Collimating Lens F100/F120/F150
Focusing Lens F210/F254/F330/F420
Scanning Parameters
Non-linearity under 0.5 mrad
Tracking Time 0.50ms
Repeatability (RMS) under 2 μrad
Marking Speed under 2.5 m/s
Positioning Speed under 8 m/s
Gain Drift under 30 ppm/K
Zero Drift under 20 μrad/K
8-Hour Thermal Drift (after 30-min warm-up) under 0.05 mrad
Electrical Parameters
Power Supply ±15V/5A
Input Signal Protocol XY2-100
Cooling Method Water-cooled
Mechanical Parameters
Operating Temperature 25±10°C
Dimensions (L×W×H) 195×150×171mm
Weight 5.8kg

Operating Principle

A laser galvo scanning system is a high-precision beam-positioning device based on the principle of electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, steering the incoming laser beam to any position on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coils, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (an analogue position detector, APD, or a digital encoder) reads the rotor angle in real time and compares it with the commanded position to close the servo loop. Scanning speed depends on the dynamic response of the motor; tracking time (tracking error) describes how far the galvo lags the command signal and is the key indicator of high-speed performance.

Applications

Laser Welding

Suited to precision welding of stainless steel, carbon steel, aluminium alloy, copper alloy and other metals. Spot welding, seam welding, butt welding and lap welding are all supported, with clean bead formation, a small heat-affected zone and high welding speed.

New Energy Vehicles

Used for welding power-battery cells, battery-module busbars and motor stators, and for other core new-energy vehicle components where high safety and high consistency are mandatory.

3C Electronics

Suited to welding phone mid-frames, laptop housings and connectors, and other precision electronic parts. Weld spots are fine and distortion is small, meeting the demands of miniaturised manufacturing.

Aerospace

Used for repair welding of aero-engine blades, welding of titanium alloy structural parts and other high-end applications, with reliable weld quality that meets stringent industry standards.

Medical Devices

Suited to welding medical catheters, stents and surgical instruments, with high weld cleanliness that meets medical-grade quality requirements.

Hardware Products

Used for automated welding of kitchen and bathroom hardware, locks, valves and similar products, with high welding efficiency and good consistency that significantly reduce labour cost.

Power and Electrical

Suited to welding transformer copper busbars, switchgear cabinet busbars and electrical contacts, with good conductivity and low contact resistance.

Selection Guide

When choosing a welding galvo, first size the clear aperture to the laser power: below 1500 W a 14 mm aperture is enough, 1500-3000 W calls for a 20-30 mm aperture, and above 3000 W a large aperture of 33 mm or more is needed. Then pick the model by welding speed requirement: the 30G standard series for conventional welding, the 30BS high-speed series for fast welding, and the 30G-FB2 digital closed-loop series where high repeatability and low drift are required for precision welding. For ultra-high-power welding (above 6000 W), the LHP33-FB2 is the first choice. A welding galvo must be water-cooled, and the field-lens focal length should be chosen from the required seam width and working distance together.

Series Comparison

Model Clear Aperture Max. Power Welding Speed Repeatability Control Mode Cooling Reference Price
14AW-III-Pro-SQU 14mm 1500W under 2 m/s under 2 μrad Open loop Water-cooled On request
S20GW-Pro-QU 20mm 2000W under 2.5 m/s under 2 μrad Open loop Water-cooled On request
30G 30mm 4000W under 2.5 m/s under 2 μrad Open loop Water-cooled On request
30BS 30mm 3000W under 3 m/s under 2 μrad Open loop Water-cooled On request
30G-FB2 30mm 4000W under 2.5 m/s under 1 μrad Digital closed-loop Water-cooled On request
30GH-SYS 30mm 4000W under 2.5 m/s under 2 μrad Open loop Water-cooled On request
30GH-FB2-SYS 30mm 3000W under 3 m/s under 1 μrad Digital closed-loop Water-cooled On request
LHP33-FB2-SYS 33mm 12000W under 2 m/s under 1 μrad Digital closed-loop Water-cooled On request

About the Brand

ZBTK (Shenzhen ZBTK Technology Co., Ltd.) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of R&D and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK galvos are known for cost-effectiveness and high stability, can replace comparable imported products, and enjoy a strong reputation in the Chinese laser industry.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

We provide professional galvo scanner selection advice and complete system integration, and we welcome your call.

Reviews

There are no reviews yet.

Be the first to review “ZBTK 30GH-SYS 30 mm General-Purpose Welding Galvo Kit, 4000 W, Water-Cooled”

Your email address will not be published. Required fields are marked *

中文EN