QQ: 859818709

ZBTK 3D20C 1064nm F-Type 3D Galvo Scanner, 20 mm, Pre-Objective

ZBTK 3D20C 1064nm F-Type 3D Galvo Scanner, 20 mm, Pre-Objective

Price on request
Category:

Description

Product Overview

The ZBTK 3D20C 1064nm F-type 3D galvo scanner is a pre-objective 3D scanning galvo scanner from Shenzhen ZBTK Technology Co., Ltd. (ZBTK). It has a 20 mm clear aperture and uses a pre-objective 3D scanning architecture with a built-in Z-axis dynamic focusing module, so flat and curved surfaces can be processed accurately under XYZ three-axis coordinated control. Maximum laser power is 500 W, scan angle ±0.35 rad and repeatability under 4 μrad, making it suitable for precision laser processing of large-format and curved workpieces.

Key Features

⚡ High-Speed Scanning Performance

Marking speed reaches 2 m/s and positioning speed 8 m/s, with a tracking error of only 0.40 ms. The optimised servo control algorithm ensures smooth transition between high-speed jumps and low-speed marking, and the short small-step response time keeps marking quality high even during high-speed jump marking.

🎯 High-Precision Positioning

Repeatability (RMS) is under 4 μrad, non-linearity under 0.5 mrad, gain drift under 60 ppm/K, zero-point drift under 40 μrad/K and 8-hour thermal drift under 0.15 mrad (after 30 minutes of warm-up). Precision optical sensors and advanced automatic thermal drift compensation keep positioning stability and process consistency excellent during long, uninterrupted operation.

🌡️ Ultra-Low Thermal Drift

Fine photoelectric sensor technology and an advanced automatic thermal drift compensation algorithm effectively overcome scanner thermal drift. Zero-point thermal drift is only under 40 μrad/K, gain thermal drift under 60 ppm/K and 8-hour long-term drift under 0.15 mrad, meeting the stability requirements of most long, high-volume marking and welding applications. Processing quality also stays consistent when the ambient temperature fluctuates by ±10 °C.

🔧 High-Torque Permanent-Magnet Galvo Motor

A high-torque permanent-magnet galvo motor uses high-energy-density magnets in the rotor together with low-friction precision bearings, giving a high torque constant and low rotor inertia. The motor delivers excellent dynamic response while maintaining scanning accuracy, and holds stable output during long, continuous operation.

📡 High-Precision Analogue/Digital Servo Driver Board

A high-performance ZBTK servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit and core components from first-tier international brands, and every unit undergoes 360 hours of extended burn-in testing before shipment, ensuring reliable long-term operation in harsh electromagnetic environments.

🔌 Interface Compatibility

The scanner supports the XY2-100 standard communication protocol and is compatible with most laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series) for plug-and-play, efficient system integration. Power supply: ±15 V / 10 A. Shielded interface cables effectively suppress external electromagnetic interference.

❄️ Efficient Cooling System

Air or water cooling is available. The water circuit covers the core heat zones, including the galvo mount and the entrance aperture, effectively controlling mirror temperature rise and preventing beam drift and focus shift caused by thermal lensing. Under long, high-power, continuous operation the cooling system keeps the scanner at its optimum working temperature for consistent processing quality.

🛡️ High-Reliability Design

ZBTK selects first-tier international brands for all core components, and every scanner undergoes 360 hours of extended burn-in testing before shipment, so it runs reliably under extreme conditions. The design also uses multi-stage, high-reliability protection array circuits for excellent immunity to strong interference.

Detailed Specifications

Optical Parameters
Clear Aperture 20 mm
Scan Angle ±0.35 rad
Max Laser Power 500 W
Mirror Reflection Wavelength 1064 nm
Scanning Parameters
Non-Linearity under 0.5 mrad
Tracking Time 0.40 ms
Repeatability (RMS) under 4 μrad
Marking Speed under 2 m/s
Positioning Speed under 8 m/s
Gain Drift under 60 ppm/K
Zero-Point Drift under 40 μrad/K
8-Hour Thermal Drift (after 30-min warm-up) under 0.15 mrad
Electrical Parameters
Power Supply ±15 V / 10 A
Input Signal Protocol XY2-100
Cooling Air or water cooling (optional)
Mechanical Parameters
Operating Temperature 25 ±10 °C
Dimensions (L×W×H) 290 × 120 × 125 mm
Weight 6.5 kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, steering the incoming laser beam to any position on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-rotation servo motor: when the driver board feeds control current into the motor coil, electromagnetic torque turns the rotor and mirror to the commanded angle, while a position sensor (an analogue position detector, APD, or a digital encoder) measures the rotor angle in real time and compares it with the command to close the servo loop. A 3D scanner adds a Z-axis dynamic focusing module to the 2D scanner; it adjusts the focal length by moving a variable-focus lens (meniscus lens) back and forth, so the laser focus can be shifted along the Z axis and focused precisely at any point in three-dimensional space. In a pre-objective 3D scanner the Z axis sits in front of the XY scanner: the beam is focused by the Z axis first and then deflected by the XY scanner, which allows a larger working field and processing of curved surfaces. In a post-objective 3D scanner the Z axis sits behind the XY scanner: the beam is deflected by the XY scanner first and then focused by the Z axis, giving a more compact structure that suits small-field, high-precision 3D processing. Scanning speed depends on the dynamic response of the motor, and tracking time (tracking error) describes how far the scanner lags the command signal, making it a key indicator of high-speed performance.

Applications

3D Curved Surface Processing

Suitable for laser marking and precision processing of three-dimensional curved workpieces such as automotive interior parts, 3D phone glass and curved appliance panels, where Z-axis dynamic focusing keeps the spot uniform across the whole curved surface.

Large-Format Processing

Z-axis compensation enables a very large working field (up to 600 × 600 mm and above), breaking the field limit of a conventional 2D scanner plus f-theta lens and suiting full-surface processing of large workpieces.

Deep Laser Engraving

Pre-objective 3D scanners are particularly advantageous in deep engraving, because the Z axis can follow the engraving depth in real time and keep processing quality consistent at every depth.

Laser Cutting

Combined with Z-axis dynamic focusing, it delivers high-quality cutting on materials of different thickness, with a uniform kerf and little dross, making it suitable for precision cutting.

3D Printing

Used for laser scanning in metal additive manufacturing (SLM/SLS), where the Z axis precisely controls powder layer thickness and focus position so that every layer is sintered consistently.

Laser Marking

On top of flat marking it adds marking on curved surfaces and at different heights, meeting the marking needs of profiled and stepped parts and completing multi-face processing in a single setup.

Precision Micromachining

UV 3D scanners suit high-precision microstructure processing, such as 3D micromachining of microfluidic chips, biosensors and photonic crystals.

Selection Guide

When choosing a 3D scanner, first define the process type: post-objective 3D scanners are compact and suit small-field, high-precision 3D processing (such as deep engraving and precision 3D marking), while pre-objective 3D scanners allow a larger working field and processing of curved surfaces, suiting large-format and profiled workpieces. Aperture depends on laser power and working field: choose 14-20 mm for low-power UV processing, 20-30 mm for medium- and high-power fibre lasers, and 40 mm or more for high-power CO₂ processing. The wavelength must match the laser: UV 355 nm suits precision micromachining, 1064 nm fibre lasers are the most versatile, and 10600 nm suits CO₂ laser processing.

Series Comparison

Model Clear Aperture Wavelength Focusing Marking Speed Repeatability Max Power Reference Price
3D14C (355 nm) 14 mm 355 nm Post-objective under 1.5 m/s under 3 μrad 30 W On request
3D20C (355 nm) 20 mm 355 nm Post-objective under 2 m/s under 4 μrad 30 W On request
3D20C (1064 nm-F) 20 mm 1064 nm Pre-objective under 2 m/s under 4 μrad 500 W On request
ZB3D-12D (1064 nm-R) 12 mm 1064 nm Post-objective under 2 m/s under 3 μrad 200 W On request
3D30A (930 nm) 30 mm 930 nm Post-objective under 3 m/s under 5 μrad 3000 W On request
GD3D-1064-14A 14 mm 1064 nm Pre-objective under 2 m/s under 3 μrad 500 W On request
ZB3D14A1064 14 mm 1064 nm Pre-objective (curved) under 2 m/s under 3 μrad 500 W On request
3D40AD10600FF-H 40 mm 10600 nm Pre-objective under 2 m/s under 8 μrad 1000 W On request
ZB3D30GH 30 mm 1030-1090 nm 3D on-the-fly welding under 3 m/s under 5 μrad 3000 W On request

About the Brand

Shenzhen ZBTK Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of scanner R&D and production experience. Its product range covers 2D scanning scanners, 3D dynamic-focus scanners, welding scanners and OCT galvo motors, widely used in laser marking, welding, cutting, 3D printing, medical aesthetics and other fields. ZBTK scanners are known for high cost-performance and high stability, can replace comparable imported products, and enjoy a good reputation in the Chinese laser industry.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

We provide professional galvo scanner selection advice and complete system integration solutions. Visit www.soar-laser.cn or call us.

Reviews

There are no reviews yet.

Be the first to review “ZBTK 3D20C 1064nm F-Type 3D Galvo Scanner, 20 mm, Pre-Objective”

Your email address will not be published. Required fields are marked *

中文EN