QQ: 859818709

ZBTK 3D40AD10600FF-H 40mm Large Aperture 3D Galvo Scanner for CO₂ Lasers (10.6 μm)

ZBTK 3D40AD10600FF-H 40mm Large Aperture 3D Galvo Scanner for CO₂ Lasers (10.6 μm)

Price on request
Category:

Description

Product Overview

The ZBTK 3D40AD10600FF-H is a 40 mm large-aperture 3D scanning galvanometer from ZBTK. With a 40 mm clear aperture and a pre-focus 3D scanning design, it integrates a Z-axis dynamic focusing module so that flat and curved surfaces can be processed precisely with simultaneous XYZ motion. It handles a maximum laser power of 1000 W (CO₂), a scan angle of ±0.35 rad and a repeatability of under 8 μrad, making it suitable for precision laser processing of large-format and curved workpieces.

Key Features

⚡ High-speed scanning performance

The marking speed reaches up to 2 m/s and the positioning speed 5 m/s, with a tracking error of only 0.80 ms. An optimized servo control algorithm ensures smooth transitions between high-speed jumps and low-speed marking, and the short response time at small step sizes maintains high marking quality even during high-speed jump marking.

🎯 High-precision positioning

Repeatability (RMS) is under 8 μrad, non-linearity under 1.0 mrad, gain drift under 100 ppm/K, zero drift under 50 μrad/K and 8-hour thermal drift under 0.3 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic temperature drift compensation maintain excellent positioning stability and process consistency during long continuous operation.

🌡️ Ultra-low thermal drift

Fine photoelectric sensor technology and an advanced automatic temperature drift compensation algorithm effectively overcome the thermal drift problem of galvo scanners. Zero-point thermal drift is only under 50 μrad/K, gain thermal drift under 100 ppm/K and 8-hour long-term drift under 0.3 mrad, meeting the stability requirements of most long-duration, large-scale marking and welding applications. Processing consistency is maintained even when the ambient temperature fluctuates by ±10 °C.

🔧 High-torque permanent magnet galvo motor

A high-torque permanent magnet galvo motor is used, with a rotor built from high energy density permanent magnets and low-friction precision bearings, giving a high torque constant and low rotor inertia. The motor delivers excellent dynamic response while maintaining scanning accuracy, and keeps a stable output during long continuous runs.

📡 High-precision analog/digital servo driver board

The scanner uses a high-performance ZBTK servo driver board with a high-speed PWM output stage and precision position detection. The board adopts a multi-stage anti-interference protection array circuit design, uses first-tier international brand components and is subjected to 360 hours of extended burn-in testing before shipment, ensuring long-term stable and reliable operation in harsh electromagnetic environments.

🔌 Interface compatibility

The product supports the XY2-100 standard communication protocol and analog ±5 V input, and is compatible with most laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series). It is plug-and-play for convenient and efficient system integration. The power supply requirement is ±15 V/10 A, and the interface cable uses a shielded design that effectively suppresses external electromagnetic interference.

❄️ Efficient cooling system

The scanner is water cooled. The water circuit covers the core heat zones such as the galvo mount and the beam entrance, effectively controlling lens temperature rise and preventing spot drift and focal shift caused by the thermal lens effect. Under high-power, long-duration continuous operation, the water cooling system keeps the scanner at its optimum working temperature and ensures consistent processing quality.

🛡️ High-reliability design

ZBTK selects first-tier international brands for all key components, and every scanner is subjected to 360 hours of extended burn-in testing before leaving the factory so that it runs stably and reliably over the long term under extreme conditions. The design uses multi-stage high-reliability protection array circuits that provide excellent immunity to strong interference.

Detailed Specifications

Optical Parameters
Clear aperture 40 mm
Scan angle ±0.35 rad
Maximum power handling 1000 W (CO₂)
Mirror reflection wavelength 10600 nm
Scanning Parameters
Non-linearity under 1.0 mrad
Tracking time 0.80 ms
Repeatability (RMS) under 8 μrad
Marking speed under 2 m/s
Positioning speed under 5 m/s
Gain drift under 100 ppm/K
Zero drift under 50 μrad/K
8-hour thermal drift (after 30-minute warm-up) under 0.3 mrad
Electrical Parameters
Power supply ±15 V/10 A
Input signal protocol XY2-100 / analog ±5 V
Cooling method Water cooled
Mechanical Parameters
Operating temperature 25 ± 10 °C
Dimensions (L × W × H) 580 x 230 x 200 mm
Weight 22 kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, directing the incoming laser beam to any position on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coils, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (an analog position detector or a digital encoder) continuously measures the rotor angle and compares it with the command to close the servo loop. A 3D scanner adds a Z-axis dynamic focusing module to the 2D scanner, moving a variable-focus lens (meniscus lens) back and forth to adjust the focal length, so the focus can be shifted along the Z axis and focused precisely at any point in three-dimensional space. In a pre-focus 3D scanner the Z axis sits in front of the XY galvos, so the beam is focused first and then deflected and scanned by the XY galvos, enabling a larger working field and curved surface processing; in a post-focus 3D scanner the Z axis sits after the XY galvos, so the beam is deflected first and focused afterwards, giving a more compact structure suited to small-field high-precision 3D processing. Scanning speed depends on the dynamic response of the motor, and the tracking time (tracking error) describes how closely the scanner follows the command signal and is a key indicator of high-speed performance.

Applications

3D curved surface processing

Suitable for laser marking and precision processing of three-dimensional curved workpieces such as automotive interior parts, 3D glass for mobile phones and curved appliance panels. Z-axis dynamic focusing keeps the spot uniform across the whole curved surface.

Large-format processing

Z-axis compensation enables a very large working field (up to 600 × 600 mm and beyond), breaking through the field limit of a conventional 2D scanner plus f-theta lens and making full-surface processing of large workpieces possible.

Laser deep engraving

Pre-focus 3D scanners are clearly advantageous in deep engraving: the Z axis follows the engraving depth in real time and adjusts the focus position, ensuring consistent quality at different depths.

Laser cutting

Combined with Z-axis dynamic focusing, high-quality cutting can be achieved on materials of different thickness, with uniform kerf width and little dross, which suits precision cutting applications.

3D printing

Used for laser scanning in metal additive manufacturing (SLM/SLS), where the Z axis precisely controls powder layer thickness and focus position to ensure consistent sintering quality in every layer.

Laser marking

On top of flat marking it adds curved surface and height-variation marking capability, meeting the marking needs of profiled and stepped parts and completing multiple surfaces in a single setup.

Precision micromachining

UV 3D scanners suit high-precision microstructure processing, such as the three-dimensional micromachining of microfluidic chips, biosensors, photonic crystals and other precision devices.

Selection Guide

When choosing a 3D scanner, first define the processing type: a post-focus 3D scanner has a compact structure and suits small-field high-precision 3D processing (such as deep engraving and precision 3D marking), while a pre-focus 3D scanner provides a larger working field and curved surface processing and suits large-format and profiled workpieces. Aperture selection depends on laser power and working field: 14-20 mm for low-power UV processing, 20-30 mm for medium and high power fiber lasers, and 40 mm or more for high-power CO₂ processing. The wavelength must match the laser: 355 nm UV suits precision micromachining, 1064 nm fiber lasers are the most widely used, and 10600 nm is used for CO₂ laser processing.

Series Comparison

Model Clear aperture Wavelength Focusing Marking speed Repeatability Max. power Reference Price
3D14C (355 nm) 14 mm 355 nm Post-focus under 1.5 m/s under 3 μrad 30 W On request
3D20C (355 nm) 20 mm 355 nm Post-focus under 2 m/s under 4 μrad 30 W On request
3D20C (1064 nm-F) 20 mm 1064 nm Pre-focus under 2 m/s under 4 μrad 500 W On request
ZB3D-12D (1064 nm-R) 12 mm 1064 nm Post-focus under 2 m/s under 3 μrad 200 W On request
3D30A (930 nm) 30 mm 930 nm Post-focus under 3 m/s under 5 μrad 3000 W On request
GD3D-1064-14A 14 mm 1064 nm Pre-focus under 2 m/s under 3 μrad 500 W On request
ZB3D14A1064 14 mm 1064 nm Pre-focus (curved surface) under 2 m/s under 3 μrad 500 W On request
3D40AD10600FF-H 40 mm 10600 nm Pre-focus under 2 m/s under 8 μrad 1000 W On request
ZB3D30GH 30 mm 1030~1090 nm 3D on-the-fly welding under 3 m/s under 5 μrad 3000 W On request

About the Brand

ZBTK is a leading Chinese manufacturer of laser galvanometer scanners with more than ten years of scanner development and production experience. Its product range covers the full line of 2D scanning scanners, 3D dynamic focusing scanners, welding scanners and OCT galvo motors, which are widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for their cost performance and stability and can replace comparable imported products, earning a good reputation in the Chinese laser industry.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.

Reviews

There are no reviews yet.

Be the first to review “ZBTK 3D40AD10600FF-H 40mm Large Aperture 3D Galvo Scanner for CO₂ Lasers (10.6 μm)”

Your email address will not be published. Required fields are marked *

中文EN