Description
Product Overview
The ZBTK DHCP1000 is a 1000 W handheld pulsed laser cleaning head built around a MOPA pulsed laser source, with a maximum output power of 1000 W and roughly twice the cleaning throughput of the DHCP500. It uses a QBH fibre interface, a 12 mm clear aperture and a scan width of ≤150 mm, and weighs 1350 g. It suits industrial cleaning duties where medium-to-high efficiency is needed: large-area rust removal, paint stripping and oil removal.
Key Features
- ✓ MOPA pulsed laser source: adjustable pulse parameters give high cleaning precision with minimal damage to the substrate
- ✓ 1000 W high power: cleaning throughput is double that of the 500 W version
- ✓ Scan width ≤150 mm: large coverage per pass, high cleaning efficiency
- ✓ Standard QBH interface: compatible with mainstream 1000 W MOPA lasers
- ✓ 12 mm clear-aperture galvanometer scanner: high scan precision and good uniformity
- ✓ Lightweight design: only 1350 g, so long sessions do not cause fatigue
- ✓ ±15 V 3 A supply: the standard galvanometer driver supply
- ✓ 1070±20 nm wavelength: matched to mainstream fibre lasers
Detailed Specifications
| Parameter | Value |
|---|---|
| Model | DHCP1000 |
| Laser Type | Pulsed (MOPA) |
| Maximum Laser Power | 1000 W |
| Wavelength | 1070±20 nm |
| Fibre Interface | QBH |
| Clear Aperture | 12 mm |
| Scan Width | ≤150 mm |
| Power Supply | ±15 V 3 A |
| Weight | 1350 g |
| Compatible Laser | 1000 W MOPA pulsed fibre laser |
Operating Principle
The DHCP1000 cleaning head works on the principle of laser ablation. A 1000 W MOPA laser emits pulses with high peak power, which are focused onto the workpiece surface through a collimating lens and a galvanometer scanning system; the high energy density of each pulse vaporises and lifts off the surface contamination instantly. Because the pulse width and repetition rate of a MOPA laser are adjustable, the cleaning parameters can be optimised for different contaminants and substrates: a narrow pulse width suits fine cleaning where the substrate must be protected, while a wide pulse width suits stubborn deposits where throughput matters more.
Applications
| ▶ Large-area metal rust removal (steel plate / profiles / pipe) | ▶ Industrial paint and coating removal |
| ▶ Large-area rust removal and cleaning on ships and bridges | ▶ Weld seam cleaning before and after welding |
| ▶ Deep cleaning of moulds (die-casting and forging dies) | ▶ Rust removal and maintenance of power equipment |
| ▶ Surface cleaning of oil, petrochemical and chemical equipment |
Selection Guide
Choose the DHCP1000 when: (1) you are using a 1000 W MOPA pulsed laser; (2) you need both cleaning throughput and precision; (3) you are cleaning large areas at medium efficiency. If your power requirement is lower, choose the DHCP500; if you need high-power cleaning with a continuous-mode laser, choose the SHCC1000 / SHCC2000 / SHCC3000.
Series Comparison
| Model | Laser Type | Max Power | Scan Width | Weight | Compatible Laser |
|---|---|---|---|---|---|
| DHCP500 | Pulsed MOPA | 500 W | ≤180 mm | 1350 g | 500 W MOPA |
| DHCP1000 | Pulsed MOPA | 1000 W | ≤150 mm | 1350 g | 1000 W MOPA |
| SHCC1000 | Continuous mode | 1000 W | — | 1100 g | 1000 W continuous-mode |
About the Brand
ZBTK — Shenzhen ZBTK Photoelectric Technology Co., Ltd. — is a manufacturer specialising in laser galvanometer scanners and laser cleaning heads, with more than ten years of work in laser scanning control and beam shaping. The product range covers pulsed and continuous-mode laser cleaning heads, galvanometer scanning systems and related components, widely used in laser cleaning, welding and marking, and recognised in the market for cost performance and dependable quality.
Contact Us
📞 Hotline: +86 159-2722-0467
📧 Email: 859818709@qq.com / panhongsheng_521@hotmail.com
🌐 Website: www.soar-laser.cn
📍 Address: Ningxiang, Changsha, Hunan, China
Soar Laser — a one-stop supplier of professional laser accessories, providing selection advice, technical support and after-sales service









Reviews
There are no reviews yet.